Author Topic: Which power supply should i use for my spark gap tesla coil  (Read 4358 times)

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Hello im Nex, im currently building my first spark gap tesla coil. I am looking for a power supply. Im looking for something around 450-500 Watts of power and it has to be powered by 220v 50hz. I dont want it to be an NST since i cant find any affordable ones in my price range and countries shops plus MOTS in my country are needed so the scrapyard sells one for almost 60 us dollars any ideas what i could use. ive been at car ignition coils but i dont know since their also hard to find.
 :)

Contact Me Personally at: noahstoessel@icloud.com
Sincerely, Electro Nex

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 571
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #1 on: May 30, 2023, 04:05:24 PM »
For a SGTC these are your possibilities that I am aware of:

1. NST
2. MOT
3. OBIT (oil burner ignition transformer)
4. Instrumentation transformer
5. Distribution transformer (pole transformer)

Unfortunately, if $60 is too expensive then I don't think you can use any of these. Maybe you will get lucky and find a discarded one.
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #2 on: May 30, 2023, 06:32:46 PM »
Hi Nex,
The cheapest option is the MOT for sure but it comes with its downsides. They don't really have the voltage to fire the spark gap and they get way to hot. The large current output also heats up your spark gap. OBITs deliver the necessary voltage but they are designed for short operation. My OBIT died after about 2 minutes due to secondary overheating. My advice is to get an (old) and cheap NST because they have the voltage and the ability to operate continiously. Since most NST hardly reach the 500W mark and you probably want something more powerful, you can add multiple in parallel.

Greetings,
Felix

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #3 on: May 30, 2023, 06:35:22 PM »
For a SGTC these are your possibilities that I am aware of:

1. NST
2. MOT
3. OBIT (oil burner ignition transformer)
4. Instrumentation transformer
5. Distribution transformer (pole transformer)

Unfortunately, if $60 is too expensive then I don't think you can use any of these. Maybe you will get lucky and find a discarded one.

if it is possible could you give me a site that sells NST's for 60 dollars since the NST im looking at are between 250-600 dollars a piece

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #4 on: May 30, 2023, 06:36:54 PM »
Hi Nex,
The cheapest option is the MOT for sure but it comes with its downsides. They don't really have the voltage to fire the spark gap and they get way to hot. The large current output also heats up your spark gap. OBITs deliver the necessary voltage but they are designed for short operation. My OBIT died after about 2 minutes due to secondary overheating. My advice is to get an (old) and cheap NST because they have the voltage and the ability to operate continiously. Since most NST hardly reach the 500W mark and you probably want something more powerful, you can add multiple in parallel.

Greetings,
Felix

understood do you have any recommendations for a budget of around 100-150 dollar budget max

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #5 on: May 30, 2023, 08:02:34 PM »
You should spend your money on the transformer because in my oppinion it's the most crucial part of small SGTCs since larger coils require a larger budget. You can for example make your tank cap from tinfoil and beer bottles which costs nothing. The transformer however is the base for a good operation. If you spend some time on ebay, you will find a NST for cheap. Please don't expect any large results like 1m arcs with a budget tesla coil.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #6 on: May 30, 2023, 08:15:12 PM »
You should spend your money on the transformer because in my oppinion it's the most crucial part of small SGTCs since larger coils require a larger budget. You can for example make your tank cap from tinfoil and beer bottles which costs nothing. The transformer however is the base for a good operation. If you spend some time on ebay, you will find a NST for cheap. Please don't expect any large results like 1m arcs with a budget tesla coil.

i have discovered a good power supply only 420 watts but when i need more power i can always order another one  its 420 watts but should work just fine: Allanson SS1235ICH my only concern is that it needs a 120v input so i will need to buy a good very effective stepdown transformer since it demands high current input does it look good to you

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #7 on: May 30, 2023, 08:30:51 PM »
The transformer itself looks good. 12kV at 35mA is quite nice. I would however think twice since you live in a 220V country. Try to find one with a fitting primary voltage because in the end it'll probably be cheaper.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #8 on: May 30, 2023, 08:41:34 PM »
The transformer itself looks good. 12kV at 35mA is quite nice. I would however think twice since you live in a 220V country. Try to find one with a fitting primary voltage because in the end it'll probably be cheaper.
will do thanks for all the help btw will try to look for something

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #9 on: May 30, 2023, 08:48:34 PM »
The transformer itself looks good. 12kV at 35mA is quite nice. I would however think twice since you live in a 220V country. Try to find one with a fitting primary voltage because in the end it'll probably be cheaper.
You should spend your money on the transformer because in my oppinion it's the most crucial part of small SGTCs since larger coils require a larger budget. You can for example make your tank cap from tinfoil and beer bottles which costs nothing. The transformer however is the base for a good operation. If you spend some time on ebay, you will find a NST for cheap. Please don't expect any large results like 1m arcs with a budget tesla coil.

thank you for making me look farther i found something close enough 12kv 30mA plus its shipping from germany with amazon prime so i think this will be the one i go with https://www.amazon.de/-/en/EVTSCAN-NP-12000-30-Electronic-Transformer-Supply/dp/B092ZW4WWB/ref=sr_1_11?crid=30VQ74L8RC55S&keywords=neon+sign+transformer&qid=1685472264&sprefix=neon+sign+transformer%2Caps%2C128&sr=8-11 could you just confirm if this will work before i order it plus i like that its 220-240v input

Offline alan sailer

  • High Voltage Engineer
  • ****
  • Posts: 314
  • Karma: +18/-1
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #10 on: May 30, 2023, 09:19:37 PM »
Sorry that used NST are so expensive.

I don't know for a fact, but many modern electronic neon sign transformers have a lot of fault protection circuitry. This MAY mean that it will not react well to the more chaotic SGTC environment...

Sorry that I can't give you a more definitive answer.

In my own case I bought several of these modern high frequency neon sign supplies and they turn out to be useless for powering plasma tubes because of the fault circuity. They would start up, not get the expected load and shut down.

Cheers.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #11 on: May 30, 2023, 09:22:10 PM »
Sorry that used NST are so expensive.

I don't know for a fact, but many modern electronic neon sign transformers have a lot of fault protection circuitry. This MAY mean that it will not react well to the more chaotic SGTC environment...

Sorry that I can't give you a more definitive answer.

In my own case I bought several of these modern high frequency neon sign supplies and they turn out to be useless for powering plasma tubes because of the fault circuity. They would start up, not get the expected load and shut down.

Cheers.

thank you very much with the help a nice guy on this forum i have been able to find something cheap and effective but thanks for the advice

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #12 on: May 30, 2023, 11:03:31 PM »
Yeah alan is right! That's why I wrote (old) just because the old designs are more resistent to abuse. Try to get an old one in good shape. You can find an example of a NST I would buy in the link: https://www.ebay.com/itm/115811984481?hash=item1af6eea461:g:SmEAAOSwdWNka7zB . If you allready bought the one you mentioned, it'll work fine I think. Just keep an eye on the clock while running and don't let it run for too long.
« Last Edit: May 30, 2023, 11:05:43 PM by Felix M. »

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #13 on: May 30, 2023, 11:06:42 PM »
Yeah alan is right! That's why I wrote (old) just because the old designs are more resistent to abuse. Try to get an old one in good shape. You can find an example of a NST I would buy in the link: https://www.ebay.com/itm/115811984481?hash=item1af6eea461:g:SmEAAOSwdWNka7zB . If you allready bought the one you mentioned, it'll work fine I think. Just keep an eye on the clock while running and don't let it run for too long.
let me look at some stuff my look for something soviet idk

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #14 on: May 30, 2023, 11:20:23 PM »
Most of the time you get really nice things from the soviet union when it comes to electronic components. Back then they produced large vacuum tubes, pulse capacitors, doorknob capacitors, etc...
The best thing is they are cheap relative to the components you get today.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #15 on: May 30, 2023, 11:21:52 PM »
Most of the time you get really nice things from the soviet union when it comes to electronic components. Back then they produced large vacuum tubes, pulse capacitors, doorknob capacitors, etc...
The best thing is they are cheap relative to the components you get today.
couldnt find anything old with the ratings i need either too underpowered or in very very rough condition so idk

Offline NyaaX_X

  • High Voltage Technician
  • ***
  • Posts: 131
  • Karma: +2/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #16 on: May 31, 2023, 04:25:19 AM »
If you are making a little SGTC. You can use a "ZVS oscillator". And the high voltage transformer can choose an arc welding machine or CRT TV "Flyback transformer".

High Voltage Forum

Re: Which power supply should i use for my spark gap tesla coil
« Reply #16 on: May 31, 2023, 04:25:19 AM »

 


* Recent Topics and Posts

post Re: Tesla Coil Show Controller Project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Cameron Prince
Today at 06:44:35 AM
post I encountered a problem using GaN for ClassE
[Solid State Tesla Coils (SSTC)]
曹靖
Today at 04:12:30 AM
post Re: p-p rms or peek
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 23, 2024, 11:12:21 PM
post Re: p-p rms or peek
[Dual Resonant Solid State Tesla coils (DRSSTC)]
drobotk
July 23, 2024, 03:29:44 PM
post Re: Making a HV prove
[Electronic Circuits]
Alberto
July 23, 2024, 09:04:26 AM
post Re: p-p rms or peek
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 23, 2024, 01:52:21 AM
post p-p rms or peek
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 22, 2024, 11:13:57 PM
post Re: Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
Anders Mikkelsen
July 22, 2024, 01:41:33 PM
post Re: Measuring 2000+ Amps DC to the Hundredths Place in the 50's and 60's.
[General Chat]
Patrick
July 22, 2024, 06:22:17 AM
post Re: DRSSTC arc extinguishing controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
曹靖
July 22, 2024, 02:52:59 AM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 21, 2024, 11:24:34 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
July 21, 2024, 11:12:18 PM
post Re: DRSSTC arc extinguishing controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 21, 2024, 08:21:43 PM
post Re: Making a HV prove
[Electronic Circuits]
TizianoBll
July 21, 2024, 07:56:12 PM
post Re: First DRSSTC Build- Issues with Fibernet project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
July 21, 2024, 07:29:29 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 21, 2024, 06:23:19 PM
post Re: Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
yourboi
July 20, 2024, 08:37:03 PM
post Re: Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
davekni
July 20, 2024, 08:03:19 PM
post Re: Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
yourboi
July 20, 2024, 06:43:12 PM
post DRSSTC arc extinguishing controller
[Dual Resonant Solid State Tesla coils (DRSSTC)]
曹靖
July 20, 2024, 04:46:05 AM
post Re: Measuring 2000+ Amps DC to the Hundredths Place in the 50's and 60's.
[General Chat]
klugesmith
July 20, 2024, 04:30:21 AM
post Re: Measuring 2000+ Amps DC to the Hundredths Place in the 50's and 60's.
[General Chat]
Patrick
July 20, 2024, 01:22:05 AM
post Re: Measuring 2000+ Amps DC to the Hundredths Place in the 50's and 60's.
[General Chat]
davekni
July 19, 2024, 08:26:43 PM
post Whirlpools, Black Holes, Event Horizon and Not At All The Same?
[Science, Research and News In Other Fields Than Electronics]
Mads Barnkob
July 19, 2024, 02:17:33 PM
post Measuring 2000+ Amps DC to the Hundredths Place in the 50's and 60's.
[General Chat]
Patrick
July 19, 2024, 09:18:12 AM
post Re: DRSSTC with litz-wire primary and 40 x TO247 IGBT H-Bridge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 18, 2024, 07:47:24 PM
post Re: Syntherrupter Lightsaber Sender Programming
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 18, 2024, 06:05:22 PM
post Re: 8kW CW DRSSTC driven by ZVS (Mazzilli) oscillator
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 18, 2024, 06:35:05 AM
post Re: 8kW CW DRSSTC driven by ZVS (Mazzilli) oscillator
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 18, 2024, 05:43:53 AM
post Re: 8kW CW DRSSTC driven by ZVS (Mazzilli) oscillator
[Dual Resonant Solid State Tesla coils (DRSSTC)]
klugesmith
July 17, 2024, 11:38:27 PM
post Re: 8kW CW DRSSTC driven by ZVS (Mazzilli) oscillator
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 17, 2024, 01:49:59 PM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
klugesmith
July 17, 2024, 05:24:19 AM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
davekni
July 17, 2024, 05:04:38 AM
post Re: 8kW CW DRSSTC driven by ZVS (Mazzilli) oscillator
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 17, 2024, 04:28:40 AM
post 8kW CW DRSSTC driven by ZVS (Mazzilli) oscillator
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 17, 2024, 04:23:46 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 17, 2024, 01:31:56 AM
post Re: QCW power draw
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 16, 2024, 11:13:42 PM
post Re: Making a HV prove
[Electronic Circuits]
Alberto
July 16, 2024, 09:00:06 PM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
klugesmith
July 16, 2024, 08:44:20 PM
post QCW power draw
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 16, 2024, 04:37:48 PM
post Lord Kelvin's Water Dropper Fountain
[Static Electricity]
Coupling
July 16, 2024, 03:31:38 PM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coupling
July 16, 2024, 03:22:09 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 16, 2024, 05:40:41 AM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 16, 2024, 03:07:36 AM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coupling
July 16, 2024, 02:18:25 AM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 16, 2024, 02:02:35 AM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coupling
July 16, 2024, 01:37:14 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 16, 2024, 12:29:08 AM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 15, 2024, 11:59:51 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 15, 2024, 11:53:05 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 15, 2024, 11:32:14 PM
post Re: Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 15, 2024, 09:36:08 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 15, 2024, 09:28:58 PM
post Re: DRSSTC with litz-wire primary and 40 x TO247 IGBT H-Bridge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 15, 2024, 09:26:42 PM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 15, 2024, 09:20:18 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 15, 2024, 08:51:04 PM
post Re: Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 15, 2024, 08:39:07 PM
post Running a Large DRSSTC at 100kHz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coupling
July 15, 2024, 04:45:46 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 15, 2024, 03:06:30 PM
post Re: DRSSTC with litz-wire primary and 40 x TO247 IGBT H-Bridge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
NyaaX_X
July 15, 2024, 03:03:26 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 15, 2024, 12:18:14 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 14, 2024, 10:49:31 PM
post Re: Making a HV prove
[Electronic Circuits]
TizianoBll
July 14, 2024, 10:47:50 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 14, 2024, 10:21:40 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 14, 2024, 10:00:51 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 14, 2024, 09:09:17 PM
post Re: DRSSTC with litz-wire primary and 40 x TO247 IGBT H-Bridge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 14, 2024, 06:03:07 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
July 14, 2024, 05:36:30 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 14, 2024, 01:32:03 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
July 13, 2024, 10:44:55 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 13, 2024, 10:09:06 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
July 13, 2024, 09:58:54 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 13, 2024, 08:30:11 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
July 13, 2024, 07:07:03 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 12, 2024, 10:17:36 PM
post Making a HV prove
[Electronic Circuits]
Alberto
July 12, 2024, 09:01:08 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
July 12, 2024, 01:33:37 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 12, 2024, 12:17:32 AM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
davekni
July 11, 2024, 07:38:26 PM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
klugesmith
July 11, 2024, 06:30:00 PM
post LOD No Double Resonant SSTC?
[Solid State Tesla Coils (SSTC)]
ColinHeath
July 11, 2024, 06:08:30 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 11, 2024, 12:24:56 PM
post Re: Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 11, 2024, 06:42:23 AM
post Re: Syntherrupter Lightsaber Sender Programming
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 11, 2024, 05:46:07 AM
post Syntherrupter Lightsaber Sender Programming
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 11, 2024, 05:26:51 AM
post Re: Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 11, 2024, 02:50:54 AM
post Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coupling
July 11, 2024, 12:59:55 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
July 10, 2024, 07:10:34 PM
post Re: Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 10, 2024, 06:52:42 PM
post Re: Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 10, 2024, 06:28:19 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 10, 2024, 01:34:09 PM
post Re: Silicon(e) plasma
[General Chat]
alan sailer
July 10, 2024, 12:09:06 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 09, 2024, 11:52:00 PM
post Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 09, 2024, 07:37:22 PM
post Re: Silicon(e) plasma
[General Chat]
MechatEng2023
July 09, 2024, 07:30:05 PM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 09, 2024, 03:30:49 AM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 09, 2024, 12:51:02 AM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 08, 2024, 11:30:44 PM
post Re: Why so cheap?
[General Chat]
alan sailer
July 08, 2024, 10:57:10 PM
post UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 08, 2024, 10:21:01 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal