Author Topic: Cheaper Tesla coil capacitors  (Read 361 times)

Offline MarcusFunt

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +0/-0
    • View Profile
Cheaper Tesla coil capacitors
« on: June 09, 2022, 08:44:49 PM »
I am thinking of making a dual mot sgtc, and therefore i need capacitors.

My coil will be running at around 320khz.
I ran some calculations on the max voltage of the mots and doubled the value to 12000V.
I am aiming for slower arcs of around 150 bms. So my max capacitance becomes 95nf.


All decent tesla coil capacitors i found are REALLY expensive, so my idea was:

https://www.amazon.de/-/en/gp/product/B08NVLCGBS/ref=ox_sc_act_title_2?smid=A3TAA9JQ6SVWB5&psc=1 (induction cooker capacitors) induction cookers KILL capacitors, and so do tesla coils. (i would get a capacitor rated 12kv 33nf)

The safe route: https://dk.rs-online.com/web/p/products/7441461/ (Fancy CDE cap)(12kv but only 12nf)

Experimental: https://dk.rs-online.com/web/p/filmkondensatorer/1051060 (REALLY CHEAP) i could build a large mmc that is WAY in excess of the others

Also: https://dk.rs-online.com/web/p/filmkondensatorer/7123905(12kv 15nf)


Let me know if you know any decent capacitor that fit in my budget of around 20£(Has to be from within the eu because of import taxes)

I heard somewhere that you look at the dc voltage of the tesla coil. is that true?

Offline davekni

  • High Voltage Expert
  • ******
  • Posts: 1722
  • Karma: +86/-0
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Cheaper Tesla coil capacitors
« Reply #1 on: June 10, 2022, 05:16:48 AM »
Quote
I am thinking of making a dual mot sgtc, and therefore i need capacitors.
MOTs are particularly dangerous:  Enough voltage to arc through clothing with current capability several times lethal threshold.  NSTs are much safer, generally limited to 60mA or less, so much less likely to be lethal if you make a single mistake.  I have a dual-MOT SRSGTC, but rarely set it up because I'm too afraid of making a mistake.

Quote
I am aiming for slower arcs of around 150 bms. So my max capacitance becomes 95nf.
That is rather low power for two MOTs.  6kV on 95nF is 1.71J, or 257 watts at 150 BPS.  Two MOTs are capable of 2kW (or more for intermittent use).  My coil runs at 120 BPS with ~700nF and resonant charging to 9kV.  Of course, if you have two MOTs in hand, that's cheaper than purchasing anything safer for 257 watts.

Your first link to 0.33uF 1200Vdc induction cooker capacitors looks like roughly the same parts I use in my DRSSTC and have ran some destructive testing to 2100Vpk (4200Vpp) at 80kHz 1% duty cycle.  Your third link labeled "VERY CHEAP" would require 4 times as many parts for the same final Vdc rating and capacitance, since they are only 630Vdc rated.  Would likely work fine, though I have no experience with these.

Have fun, and experiment safely!
« Last Edit: June 10, 2022, 05:18:27 AM by davekni »
David Knierim

Offline MarcusFunt

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +0/-0
    • View Profile
Re: Cheaper Tesla coil capacitors
« Reply #2 on: June 10, 2022, 09:41:02 AM »
Quote
I am thinking of making a dual mot sgtc, and therefore i need capacitors.
MOTs are particularly dangerous:  Enough voltage to arc through clothing with current capability several times lethal threshold.  NSTs are much safer, generally limited to 60mA or less, so much less likely to be lethal if you make a single mistake.  I have a dual-MOT SRSGTC, but rarely set it up because I'm too afraid of making a mistake.

Quote
I am aiming for slower arcs of around 150 bms. So my max capacitance becomes 95nf.
That is rather low power for two MOTs.  6kV on 95nF is 1.71J, or 257 watts at 150 BPS.  Two MOTs are capable of 2kW (or more for intermittent use).  My coil runs at 120 BPS with ~700nF and resonant charging to 9kV.  Of course, if you have two MOTs in hand, that's cheaper than purchasing anything safer for 257 watts.

Your first link to 0.33uF 1200Vdc induction cooker capacitors looks like roughly the same parts I use in my DRSSTC and have ran some destructive testing to 2100Vpk (4200Vpp) at 80kHz 1% duty cycle.  Your third link labeled "VERY CHEAP" would require 4 times as many parts for the same final Vdc rating and capacitance, since they are only 630Vdc rated.  Would likely work fine, though I have no experience with these.

Have fun, and experiment safely!

I only felt safe enough to build it because a am doing it with two friends.

I think of using the cheap caps because I can distribute the load across 80( or so) caps.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1989
  • Karma: +52/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Cheaper Tesla coil capacitors
« Reply #3 on: July 05, 2022, 08:23:07 PM »
Let me know if you know any decent capacitor that fit in my budget of around 20£(Has to be from within the eu because of import taxes)

I heard somewhere that you look at the dc voltage of the tesla coil. is that true?

20£ is a small budget for a MMC and you will properly have to find a good bargain on ebay to make it for that small amount. Another route is to make it smaller than needed, going low on voltage and current rating will however shorten the life time of the MMC considerably.

Using DC voltage ratings instead of AC voltage ratings is a "trade off". You can design it cheaper and the short pulse operation of a Tesla coil can to some degree justify this, as the heat losses have more time to dissipate. But there is no doubt, that designing with DC voltage ratings, you again shorten the life time of the MMC.

The capacitors you look at are maybe designed for 5-10 years full spec operation, so if you can get 100 hours of full abuse on them, well 100 hours run time of a Tesla coil is a really long time and most amateur built coils will rarely see 100 hours in their life time :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

High Voltage Forum

Re: Cheaper Tesla coil capacitors
« Reply #3 on: July 05, 2022, 08:23:07 PM »

 


* Recent Topics and Posts

post Re: Aluminium Nitride Thermal Pads
[General Chat]
Weston
Today at 08:33:16 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mike
Today at 04:20:00 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 02:25:07 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
Today at 02:18:56 AM
post Re: Problem with VTTC Staccato interrupter PLZ HELP
[Vacuum Tube Tesla Coils (VTTC)]
davekni
Today at 01:57:37 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:54:04 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
Today at 12:09:56 AM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 13, 2022, 10:14:40 PM
post Problem with VTTC Staccato interrupter PLZ HELP
[Vacuum Tube Tesla Coils (VTTC)]
NerdlabsMadScience
August 13, 2022, 09:32:08 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 13, 2022, 09:11:03 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 13, 2022, 08:45:41 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 13, 2022, 08:20:01 PM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 13, 2022, 08:00:14 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 13, 2022, 07:41:45 PM
post A little idea I had for my dual full bridge design
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Overlordcheese
August 13, 2022, 06:42:34 PM
post Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
August 13, 2022, 06:17:43 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 13, 2022, 03:18:05 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 12, 2022, 11:03:52 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 12, 2022, 10:53:44 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 12, 2022, 10:13:02 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 12, 2022, 09:35:29 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
klugesmith
August 12, 2022, 08:28:28 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
davekni
August 12, 2022, 07:26:41 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
alan sailer
August 12, 2022, 06:52:58 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
klugesmith
August 12, 2022, 06:39:27 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 12, 2022, 06:38:44 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
klugesmith
August 12, 2022, 05:57:00 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
klugesmith
August 12, 2022, 12:44:20 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 12, 2022, 08:36:23 AM
post Aluminium Nitride Thermal Pads
[General Chat]
Weston
August 12, 2022, 04:31:17 AM
post Re: Helpy Trying to Replicate This Strange Slittle DRSSTC? PLS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
August 12, 2022, 02:55:27 AM
post Re: Small DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mike
August 12, 2022, 01:27:14 AM
post Re: Small DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 11, 2022, 11:51:42 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 11, 2022, 11:35:43 PM
post Say what -- arcing TO polycarbonate!
[Voltage Multipliers]
abstruse1
August 11, 2022, 10:56:28 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
Mads Barnkob
August 11, 2022, 07:40:03 PM
post Re: Huge Mistake Designing My Coil
[Spark Gap Tesla Coils (SGTC)]
MarcusFunt
August 11, 2022, 06:54:14 PM
post Re: Huge Mistake Designing My Coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
August 11, 2022, 05:07:28 PM
post Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 11, 2022, 11:13:20 AM
post Huge Mistake Designing My Coil
[Spark Gap Tesla Coils (SGTC)]
MarcusFunt
August 11, 2022, 10:03:54 AM
post Re: Small DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mike
August 11, 2022, 06:12:48 AM
post Re: Painfully Amazing Stuff
[Voltage Multipliers]
klugesmith
August 11, 2022, 03:14:55 AM
post Re: Painfully Amazing Stuff
[Voltage Multipliers]
55#sofcopper
August 11, 2022, 02:55:16 AM
post Painfully Amazing Stuff
[Voltage Multipliers]
alan sailer
August 10, 2022, 10:47:09 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 10, 2022, 07:51:16 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 10, 2022, 06:36:23 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
alan sailer
August 10, 2022, 01:34:40 AM
post Re: High Voltage pcb
[Printed Circuit Board]
FonziDaytona
August 09, 2022, 10:17:24 PM
post Re: High Voltage pcb
[Printed Circuit Board]
Twospoons
August 09, 2022, 10:16:33 PM
post Re: How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 09, 2022, 09:22:37 PM
post Re: High Voltage pcb
[Printed Circuit Board]
Mads Barnkob
August 09, 2022, 09:19:26 PM
post Re: High Voltage pcb
[Printed Circuit Board]
FonziDaytona
August 09, 2022, 08:32:08 PM
post Re: High Voltage pcb
[Printed Circuit Board]
Mads Barnkob
August 09, 2022, 08:26:32 PM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
Mads Barnkob
August 09, 2022, 08:15:54 PM
post High Voltage pcb
[Printed Circuit Board]
FonziDaytona
August 09, 2022, 08:15:10 PM
post Top load material selection
[Spark Gap Tesla Coils (SGTC)]
55#sofcopper
August 09, 2022, 04:44:43 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
MRMILSTAR
August 09, 2022, 04:20:01 PM
post Loneoceans UD 2.7 rev c issue
[General Chat]
mthome4
August 09, 2022, 03:11:56 PM
post Re: A big-ish diy xformer
[Transformer (Ferrite Core)]
oneKone
August 09, 2022, 07:30:29 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
August 09, 2022, 07:06:52 AM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 09, 2022, 07:06:34 AM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
davekni
August 09, 2022, 06:28:49 AM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
Twospoons
August 09, 2022, 06:18:56 AM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
davekni
August 09, 2022, 06:08:53 AM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 09, 2022, 04:29:49 AM
post HV AC Current Measurement
[Transformer (Iron Core)]
alan sailer
August 09, 2022, 02:18:35 AM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
TMaxElectronics
August 09, 2022, 12:42:21 AM
post Re: A big-ish diy xformer
[Transformer (Ferrite Core)]
abstruse1
August 09, 2022, 12:31:47 AM
post Re: How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Twospoons
August 09, 2022, 12:22:26 AM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
Twospoons
August 09, 2022, 12:00:39 AM
post Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
TMaxElectronics
August 08, 2022, 11:24:45 PM
post Re: Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
August 08, 2022, 10:07:08 PM
post Re: How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
August 08, 2022, 10:01:56 PM
post Re: Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Maju
August 08, 2022, 10:00:22 PM
post Re: Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:52:09 PM
post Re: Helpy Trying to Replicate This Strange Slittle DRSSTC? PLS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:51:09 PM
post Re: Where To Get "Free" TO-247 IGBTs and MOSFETs
[Electronic Circuits]
TMaxElectronics
August 08, 2022, 09:50:49 PM
post How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:47:24 PM
post Re: Syntherrupter - Build by AstRii
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 08, 2022, 09:44:04 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:43:38 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 08, 2022, 09:42:37 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
August 08, 2022, 09:27:10 PM
post Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
August 08, 2022, 08:09:38 PM
post Helpy Trying to Replicate This Strange Slittle DRSSTC? PLS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
August 08, 2022, 04:10:00 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
August 08, 2022, 07:54:27 AM
post Re: SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 07, 2022, 07:28:51 PM
post Re: Bipolar CW -- update
[Voltage Multipliers]
abstruse1
August 07, 2022, 07:15:11 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 07, 2022, 06:46:44 PM
post Re: SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alexhanyuan
August 07, 2022, 06:11:59 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
August 07, 2022, 08:25:56 AM
post Re: SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 07, 2022, 03:46:50 AM
post SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alexhanyuan
August 06, 2022, 10:23:27 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
davekni
August 06, 2022, 09:34:35 PM
post Re: Can someone help, am not getting any plasma :-) much appreciated
[Spark Gap Tesla Coils (SGTC)]
ItsChloeUwU
August 06, 2022, 07:49:05 PM
post Re: Primary Wire Getting Hot, Secondary flashovers, RSG Not Alway Fireing? Help pls.
[Spark Gap Tesla Coils (SGTC)]
ItsChloeUwU
August 06, 2022, 07:42:00 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
August 06, 2022, 07:05:35 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 06, 2022, 04:06:48 PM
post Re: CORE FOR GDT AND CT
[Solid State Tesla Coils (SSTC)]
Didik
August 05, 2022, 11:59:58 AM
post Re: CORE FOR GDT AND CT
[Solid State Tesla Coils (SSTC)]
Rafft
August 05, 2022, 09:56:26 AM
post Re: CORE FOR GDT AND CT
[Solid State Tesla Coils (SSTC)]
davekni
August 05, 2022, 06:25:39 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal