Author Topic: Next Gen DRSSTC  (Read 79675 times)

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 487
  • Karma: +24/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #40 on: June 20, 2018, 11:07:26 PM »
It may be possible to do this, yes. I believe that the TQFP parts (in Netzpfuscher's PCB) are basically a superset of the QFNs on the dev board, so that any pin selection that works for the dev board can also work for a TQFP based PCB.

Unfortunately the PCBs out in the wild (those from when Steve Ward built his, Netzpfuscher's and one that I have) are designed around a pinout that can't be replicated with a dev board, so there'll always be a need for a couple of different configs. None of this is particularly hard, it's just annoying as someone has to muck about changing stuff for every code release.

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #41 on: June 22, 2018, 07:43:29 AM »
I reorganized the code and found a relatively good solution for the different boards. I split the code in a common code base and the board specific files. The common code is linked in the board specific folders. The _QFN projects are for the dev board and the _TQFP for the classic boards.

If someone gives me the pinout of the dev board version I merge it to the git. I only need the ".cydwr" file. Or clone the new repository and make a pull request.

https://github.com/Netzpfuscher/UD3

common:
binary Binary files like the precompiled bootloader
ntshell Shell code
rtos FreeRTOS code
uart_ldr UART-Bootloader code
ud3core UD3 code

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #42 on: June 22, 2018, 09:41:05 AM »
Here is what I have for the cydwr attached.  I also changed the clocks around as well.

Thanks,

Dan

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #43 on: July 17, 2018, 07:36:39 AM »
There are a bunch of new features incoming. https://github.com/Netzpfuscher/UD3/tree/burst_mode

  • Ethernet support with a Wiznet W5500
  • Teslaterm with IP-Support
  • Teslaterm now has a MIDI-In. With a virtual MIDI-Port it is possible to send MIDI from every App you like
  • Teslaterm with support for a Korg nanoKONTROL2 controller
  • The UART is equipped with a protocol and transport layer for error detection and retransmission (https://github.com/min-protocol/min)
  • Burst mode interrupter

The Ethernet connects to the 8pin header on the UD3. I think Ethernet is a good choice. It is isolated, cheap and you don't need special Hardware. If you want to run a multi coil system, you can throw a switch between the coils and connect a fiber Ethernet to the computer. If I have the Firmware in a good state, I upload a release in binary form. I think it is much easier to flash a binary for someone who is no programmer ^^

We hit the 2m ^^




« Last Edit: July 17, 2018, 08:06:21 AM by Netzpfuscher »

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #44 on: August 17, 2018, 09:09:30 AM »
I've made several bugfixes. Ethernet is working, Teslaterm is more stable.

Actually I'm working on the duty cycle limiter for the MIDI mode. My first proof of concept works relatively good. There are no more big current spikes if a very high MIDI-Note is playing.


Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #45 on: September 09, 2018, 07:59:44 PM »
I've added a new synthesizer in the UD3. The new synthesizer "emulates" the famous SID chip. The UD3 interprets the music on a register level. The noise synthesis of the SID makes a very nice drum effects.

Offline Uspring

  • High Voltage Engineer
  • ****
  • Posts: 344
  • Karma: +32/-1
  • Physicist
    • View Profile
Re: Next Gen DRSSTC
« Reply #46 on: September 10, 2018, 01:37:22 PM »
Very neat  :)
There was a short discussion on 4hv a few years ago on tricks to enhance TC sounds.
http://4hv.org/e107_plugins/forum/forum_viewtopic.php?157570.0#post_157851

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 487
  • Karma: +24/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #47 on: September 10, 2018, 04:31:16 PM »
Cool, new stuff to play with :)
Unfortunately I haven't had time to do much work on coiling recently, but I will be giving your new code a go when I get a chance. I'll also be in NZ again at the end of the year, so will have my large coil to play with too (I have a 75% finished UD3 board to install into it). On that note, Uspring - I'll be having another go at the toroid current measurements I promised and failed to do in April, this time I will have a lot more time to spare and hopefully won't injure my back trying to lift the coil down out of storage like I did in April!

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Next Gen DRSSTC
« Reply #48 on: September 12, 2018, 08:56:06 AM »
Great progress on the UD3 Netzpfuscher!

I will set it up as a goal for this winter to get a working UD3 with your software :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #49 on: September 13, 2018, 08:59:50 AM »
One warning. The newest GIT-Version of the Dev-Board UD3 software has a messy pinout. I need to correct this before I merge it in the master branch. I use the dev-board for ethernet debugging so it is a little bit hackish. In general there is heavy work in progress ^^

I also work on a new PCB revision in Kicad with integrated Ethernet. Ethernet works so great and doesn't need special Hardware. I think it is better to go away from the expensive Altium ^^


Thanks to malte0811 the Teslaterm is growing. He added a scripting feature to automate the coil for show use.
In general the UD3 ist still fully functional with a normal VT100 Terminal.

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #50 on: November 07, 2018, 09:43:57 PM »
I've made Teslaterm and the UD3 more user friendly with a settings form. I found some small bugs in Teslaterm and the UD3 and fixed these. The newest files are in the master branches:

https://github.com/Netzpfuscher/UD3
https://github.com/Netzpfuscher/Teslaterm


Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 487
  • Karma: +24/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #51 on: November 07, 2018, 09:50:32 PM »
Thanks! I'm about to order some boards to upgrade my big coil (in NZ) to a UD3 to use when I'm there over Xmas. Will take some pics/video and also some topload current waveforms to share.

Offline plasmatree

  • High Voltage Enthusiast
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #52 on: March 25, 2019, 06:34:09 PM »
Hello everybody and thanks already for this amazing work!
It has been >10y that I messed with tesla stuff, but somehow it's in my head again.  ::)
Looking at the different UD iterations using FPGAs seems obvious to me. Combined with the simplicity of this dev board... great!

I'm preparing to order the pcbs and was wondering if the plans for the Psoc5-Power found in the pcb pack are still the most recent/recommended versions for this driver?
Should I consider to add or change something?

Greetings from Cologne,
Flo

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #53 on: March 25, 2019, 07:35:14 PM »
Apparently there have been updates to the pinout that I have not incorporated into Psoc5-power yet, so you might want to hold off.  You don't need the board if you want to breadboard it.

I could update it if I get an updated pin list.  I haven't looked at the latest PsoC creator project lately to see what the new assignments are.  I think there is support for Ethernet now.

Dan

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #54 on: March 25, 2019, 08:07:10 PM »
It should be possible to go back to the old pinout. I primarily changed it to make a simple connector cable to the W5500 board on my desk ^^
Perhaps I add a non development version with the dev kit to the UD3 project.

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #55 on: March 31, 2019, 08:54:25 PM »
I've added a new experimental feature. A fuse emulation.

You set the maximum continuous current and the 10s limit from the breaker curve. The UD3 tries to limit the duty cycle to keep the fuse under 60% of the trip point. The gauge on the lowest right is the fuse (100% fuse tripped). The gauge in top of the "fuse" is the duty cycle limiter (higher is more limited).

If the controller can not keep the current low enough and the fuse reaches the 100% the UD3 shuts the coil down.

I think there is a lot to improve, but you can see what I'm trying to do.


Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Next Gen DRSSTC
« Reply #56 on: March 31, 2019, 09:51:28 PM »
Very nice feature, I can really see that come in handy for shows where it would be good not to have a trip or any kind. Did you try it out with sparks and most interesting heavy ground strikes?
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #57 on: April 01, 2019, 07:17:28 AM »
No, this is the next step. The test in the video is only a static load test with a bunch of scrap metal in the primary.

Offline Netzpfuscher

  • High Voltage Technician
  • ***
  • Posts: 137
  • Karma: +13/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #58 on: May 23, 2019, 09:01:24 PM »
We have made some full power runs. Input power is around 10-18kW from 3 phase mains 580V on the bus.



We had some problems with the ESP32 interface, but I'm working on a new one. Based on node.js and can be run on every computer/raspberry/orange pi/ etc...

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 487
  • Karma: +24/-0
    • View Profile
Re: Next Gen DRSSTC
« Reply #59 on: May 25, 2019, 03:40:00 PM »
Just watched the videos - nice work!

Unfortunately haven't had time to do much work on my coil(s) recently, but when I do I'll have a play with all the new features you've added.

High Voltage Forum

Re: Next Gen DRSSTC
« Reply #59 on: May 25, 2019, 03:40:00 PM »

 


* Recent Topics and Posts

post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
OmGigaTron
March 18, 2024, 09:08:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 09:07:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
Twospoons
March 18, 2024, 08:57:06 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
MRMILSTAR
March 18, 2024, 03:51:33 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:59:46 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:33:25 PM
post Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 11:02:12 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Twospoons
March 18, 2024, 02:36:11 AM
post Re: Best forum for vacuum tube amplifiers?
[General Chat]
Mads Barnkob
March 17, 2024, 07:42:55 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:15:14 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 05:05:04 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
davekni
March 17, 2024, 04:50:51 AM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Twospoons
March 17, 2024, 04:45:17 AM
post 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:17:51 AM
post Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Terry
March 17, 2024, 01:29:32 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 17, 2024, 12:33:06 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 16, 2024, 08:46:20 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 08:39:24 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 08:21:44 PM
post Best forum for vacuum tube amplifiers?
[General Chat]
yourboi
March 16, 2024, 08:20:13 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 08:07:55 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 03:30:27 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 02:42:39 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 02:22:28 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 16, 2024, 12:36:02 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 15, 2024, 08:56:58 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 15, 2024, 08:06:08 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 15, 2024, 06:44:28 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 15, 2024, 06:20:47 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
March 15, 2024, 05:13:55 AM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
davekni
March 15, 2024, 12:00:51 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
davekni
March 14, 2024, 11:23:20 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 14, 2024, 09:32:27 PM
post Difference between these transformers
[Transformer (Ferrite Core)]
Alberto
March 14, 2024, 09:29:06 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 14, 2024, 09:11:54 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
WolfMoonshirt
March 14, 2024, 06:09:27 PM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 14, 2024, 01:36:35 PM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 14, 2024, 11:43:23 AM
post Re: Super flat QCW simulation (does this look reasonable?)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 14, 2024, 05:03:41 AM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
davekni
March 14, 2024, 04:56:51 AM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 14, 2024, 03:09:45 AM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
March 14, 2024, 02:23:11 AM
post Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 14, 2024, 01:02:32 AM
post Re: Art student Need help with Plasma Toroid
[Beginners]
toooldforthis
March 14, 2024, 12:01:55 AM
post Re: Art student Need help with Plasma Toroid
[Beginners]
alan sailer
March 13, 2024, 10:22:58 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 13, 2024, 09:31:22 PM
post Re: Super flat QCW simulation (does this look reasonable?)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
toooldforthis
March 13, 2024, 07:04:35 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 12, 2024, 11:55:37 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 12, 2024, 10:10:41 PM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 12, 2024, 10:08:51 PM
post No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 12, 2024, 09:13:00 PM
post Re: Anyone know of a good variable driver?
[Beginners]
FPS
March 12, 2024, 06:54:50 PM
post Art student Need help with Plasma Toroid
[Beginners]
lovejdz
March 12, 2024, 11:12:01 AM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Twospoons
March 12, 2024, 01:16:48 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 12, 2024, 01:14:35 AM
post Re: New type of hfsstc using self-oscillating current mode class D
[Solid State Tesla Coils (SSTC)]
Perolodzilla
March 11, 2024, 04:18:50 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
March 11, 2024, 12:50:34 PM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 11, 2024, 08:32:09 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 11, 2024, 05:01:03 AM
post Re: Electric insulator. Paraffin wax?
[General Chat]
MRMILSTAR
March 11, 2024, 04:23:20 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 11, 2024, 02:30:11 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
March 11, 2024, 12:37:52 AM
post Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 10, 2024, 11:06:04 PM
post Re: Bleeder resistor in CW multiplier
[Voltage Multipliers]
davekni
March 10, 2024, 06:58:51 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 10, 2024, 06:49:36 PM
post Bleeder resistor in CW multiplier
[Voltage Multipliers]
Sugarb0y
March 10, 2024, 05:37:39 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 10, 2024, 02:16:25 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 10, 2024, 02:01:12 PM
post New type of hfsstc using self-oscillating current mode class D
[Solid State Tesla Coils (SSTC)]
Perolodzilla
March 10, 2024, 01:03:51 PM
post Re: [WTS] IGBT, Ferrite, Capacitors, Tools, PSU, Industrial components and parts
[Sell / Buy / Trade]
Mads Barnkob
March 10, 2024, 10:16:38 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 10, 2024, 07:10:22 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
MRMILSTAR
March 10, 2024, 05:18:03 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 10, 2024, 04:50:13 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 10, 2024, 03:42:28 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 10, 2024, 12:05:09 AM
post DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 09, 2024, 10:40:11 PM
post Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 08, 2024, 10:49:24 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 08, 2024, 10:22:59 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 08, 2024, 08:22:34 PM
post APC Smart UPS 450 Watt, for Server 19" Rack 1U, Teardown
[Electronic Circuits]
Mads Barnkob
March 08, 2024, 04:07:44 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 08, 2024, 11:56:11 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
petespaco
March 08, 2024, 01:59:43 AM
post Re: Frequency
[Transformer (Ferrite Core)]
davekni
March 07, 2024, 11:35:01 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 07, 2024, 11:00:03 PM
post Re: Unknown Diode Replacement
[Beginners]
davekni
March 07, 2024, 10:55:40 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 07, 2024, 10:46:42 PM
post Re: Frequency
[Transformer (Ferrite Core)]
davekni
March 07, 2024, 10:23:27 PM
post Unknown Diode Replacement
[Beginners]
Luca
March 07, 2024, 09:55:48 PM
post Re: GDT Driver
[Electronic Circuits]
Mads Barnkob
March 07, 2024, 09:55:04 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
markus
March 07, 2024, 05:07:37 PM
post GDT Driver
[Electronic Circuits]
reklm
March 07, 2024, 04:17:12 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 07, 2024, 01:03:47 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 07, 2024, 05:12:31 AM
post Re: Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 07, 2024, 04:45:02 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
petespaco
March 07, 2024, 04:32:17 AM
post Re: Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 07, 2024, 03:43:25 AM
post Re: DIY induction guns? (warning:long)
[Induction Launchers, Coil Guns and Rails guns]
Michelle_
March 07, 2024, 03:22:34 AM
post Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 07, 2024, 02:35:54 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 07, 2024, 01:19:03 AM
post Re: First DRSSTC Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 07, 2024, 01:06:15 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal