Author Topic: Reverse engineering a big old American smoke detector  (Read 1893 times)

Offline klugesmith

  • High Voltage Engineer
  • ****
  • Posts: 364
  • Karma: +11/-0
    • View Profile
Reverse engineering a big old American smoke detector
« on: March 15, 2020, 09:50:48 PM »
Just noticed the thread about big old Soviet smoke detector, which makes this one seem as safe as baby ducklings.  Told this story yesterday, in almost the same words, on another forum.

Here is an old stock Pyrotronics F5B smoke detector head, similar to the F3/5 head. They are still available for people maintaining old installations, but typically cost well over $100 on ebay.

Ionization-type smoke detectors seem to have started in the 1960's. Preventing fires in industrial & institutional settings easily justified the proliferation of 80 microcurie Am-241 alpha particle sources. Those produce enough air ionization that a cold cathode trigger tube can switch the alarm circuit.

I got the pictured device to turn on a neon lamp, within a few seconds of being exposed to smoke from a smoldering popsicle stick. My circuit is shown below, on the right. The original application uses Base Units (sockets) with resistors and a neon indicator lamp, and if any reader has one I'd love to know the circuit details.

.
These old smoke detectors, just like modern ones with less than 1 uCi of radioisotope, use a reference ionization chamber as the high impedance on top of voltage divider. Cheaper than a many-gigaohm resistor, and it automatically compensates for pressure and temperature and decay of the alpha particle source.

I found out that the internal construction is similar to this unfinished drawing.  The ion chambers in schematic above were rendered accordingly.


It came as a surprise that the larger ionization source, which irradiates the smoky chamber, is directly visible through the window-screened ports. Close enough that energetic alpha particles, not just ions, could be escaping from the enclosure. Let's check with some alpha-viewing fluorescent film, like what's sold for making spinthariscopes.


Set shutter time to 30 s, aperture f/1.4, ISO 12800. Lights off, not completely. Go...


This device could be disassembled without any screwdriving, wrenching, or cutting. 
Not sure if that's a good idea, or a thing to talk about.
Even if it were reassembled and tested as a working smoke detector, good as new, ready to protect lives.

Offline John123

  • High Voltage Engineer
  • ****
  • Posts: 227
  • Karma: +4/-0
  • All the gear, no idea. UK
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #1 on: March 16, 2020, 05:57:16 AM »
Looks quite big in the photo compared to the ones inside modern detectors.

How come they were designed as replaceable parts, do they wear out and become unreliable over time?

Offline johnf

  • High Voltage Technician
  • ***
  • Posts: 158
  • Karma: +5/-0
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #2 on: March 18, 2020, 07:34:09 PM »
I think the part has been made much like tubes were made
in fact that looks like a standard octal tube base with a few pins missing.
this would fit well with early electronics manufacture allowing all to be tested before the detector head was put in

Offline TheMaxii2007

  • High Voltage Enthusiast
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #3 on: June 02, 2020, 04:19:02 AM »
Hello My old smoke detector Am-241 (72 microcurie )  ;)






« Last Edit: June 02, 2020, 04:32:01 AM by TheMaxii2007 »

Offline klugesmith

  • High Voltage Engineer
  • ****
  • Posts: 364
  • Karma: +11/-0
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #4 on: June 04, 2020, 06:30:09 AM »
Welcome to the forum, and thank you for the interesting report.

The sectional drawing you shared is much better than anything I've seen before.
It sure beats measuring parts and drawing things from scratch.
Does the document it came from include details of the circuit in base unit?

Is there a model number and/or date code on your device? 
How come the nominal activity is 72 uCi, vs 80 uCi in my specimens and in the F3/5 model we can read about?

Might as well share a picture I made with alpha-viewing film, to get an idea of relative activity in the outer and inner chamber irradiators, next to a modern sub-1-uCi source.
« Last Edit: June 04, 2020, 06:49:45 AM by klugesmith »

Offline TheMaxii2007

  • High Voltage Enthusiast
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile

High Voltage Forum

Re: Reverse engineering a big old American smoke detector
« Reply #5 on: June 06, 2020, 10:44:15 PM »

 


* Recent Topics and Posts

post Re: Video overview of my SGTC control cabinet
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
Today at 05:44:19 AM
post Re: Optimum Secondary Winding
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
Today at 04:09:37 AM
post Re: SGTC tesla coil:Why is it so dangerous ?
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
May 17, 2021, 11:13:57 PM
post Re: Video overview of my SGTC control cabinet
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
May 17, 2021, 10:57:00 PM
post Re: My 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
MRMILSTAR
May 17, 2021, 10:29:06 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
johnf
May 17, 2021, 08:52:28 PM
post Re: My 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
DashApple
May 17, 2021, 08:50:26 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
davekni
May 17, 2021, 08:36:30 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
johnf
May 17, 2021, 09:12:41 AM
post Re: Safe source for High Voltage Wire?
[General Chat]
johnnyzoo
May 17, 2021, 08:58:05 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
tophat
May 17, 2021, 01:20:45 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Steve Ward
May 17, 2021, 12:34:04 AM
post Video overview of my SGTC control cabinet
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
May 16, 2021, 11:19:58 PM
post Re: Neon power supply + voltage multiplier producing too much voltage
[Beginners]
davekni
May 16, 2021, 08:56:57 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
Mads Barnkob
May 16, 2021, 08:38:37 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Max
May 16, 2021, 08:07:38 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
TF3
May 16, 2021, 07:50:10 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
Da_Stier
May 16, 2021, 07:29:32 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Max
May 16, 2021, 03:18:09 PM
post Safe source for High Voltage Wire?
[General Chat]
MrScrOggs
May 16, 2021, 03:02:40 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
dbach
May 16, 2021, 02:24:18 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Mads Barnkob
May 16, 2021, 12:29:47 PM
post Re: 833A Cathode Modulation
[Vacuum Tube Tesla Coils (VTTC)]
pc50kd
May 16, 2021, 12:21:23 PM
post Re: Neon power supply + voltage multiplier producing too much voltage
[Beginners]
Davide
May 16, 2021, 08:08:29 AM
post Re: MOSFET Protection in SSTC
[Solid State Tesla Coils (SSTC)]
Gisho
May 16, 2021, 07:34:48 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
TF3
May 16, 2021, 03:36:13 AM
post Magnetic spin top drive
[Electronic Circuits]
haversin
May 16, 2021, 02:58:36 AM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
May 16, 2021, 02:27:45 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 16, 2021, 02:13:58 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
dbach
May 16, 2021, 01:28:45 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Mads Barnkob
May 15, 2021, 11:20:12 PM
post Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Steve Ward
May 15, 2021, 10:20:31 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
May 15, 2021, 08:51:28 PM
post Re: TV cameras and DRSSTC(how do they go together)
[General Chat]
Mads Barnkob
May 15, 2021, 08:39:59 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
May 15, 2021, 06:22:43 PM
post TV cameras and DRSSTC(how do they go together)
[General Chat]
Miki_407
May 15, 2021, 03:53:10 PM
post Re: Tiny Counterpoise
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
May 15, 2021, 02:48:19 PM
post Re: Secondary Resonant Circuit Size
[Beginners]
Uspring
May 15, 2021, 02:28:23 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
May 15, 2021, 01:11:38 PM
post Re: [WTB] Looking for bus capacitors
[Sell / Buy / Trade]
dbach
May 15, 2021, 01:02:21 PM
post Re: [WTB] Looking for bus capacitors
[Sell / Buy / Trade]
Mads Barnkob
May 15, 2021, 07:43:47 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
May 15, 2021, 06:47:43 AM
post Re: Tiny Counterpoise
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 15, 2021, 06:11:05 AM
post Tiny Counterpoise
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
May 15, 2021, 03:01:14 AM
post [WTB] Looking for bus capacitors
[Sell / Buy / Trade]
dbach
May 15, 2021, 01:58:59 AM
post Re: Secondary Resonant Circuit Size
[Beginners]
benet
May 15, 2021, 01:50:52 AM
post Re: Igbt question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
May 14, 2021, 10:27:17 PM
post Re: Igbt question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
May 14, 2021, 10:22:53 PM
post Igbt question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
May 14, 2021, 09:05:19 PM
post Re: 833A Cathode Modulation
[Vacuum Tube Tesla Coils (VTTC)]
Vdekje
May 14, 2021, 08:58:15 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal