Author Topic: Why are SGT50T65FD1PN soo cheap on lcsc?  (Read 2371 times)

Offline Miki_407

  • High Voltage Enthusiast
  • *
  • Posts: 43
  • Karma: +0/-0
    • View Profile
Why are SGT50T65FD1PN soo cheap on lcsc?
« on: June 03, 2021, 01:22:06 AM »
I was searching on lcsc when I found igbts misplaced into bjt section claiming to be able to do peak current of 150A in the datasheet. The price is just 0.981usd per piece if ordering 30+ pieces. I should say that I had no problems with SGT40N60NPFDPN from the same manufacturer at about the same price. My question is are these igbts a good option to buy for a drsstc?

Links:
Lcsc product: https://lcsc.com/product-detail/Bipolar-Transistors-BJT_Hangzhou-Silan-Microelectronics-SGT50T65FD1PN_C2761787.html
Datasheet translated using google translate: https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=https%3A%2F%2Fdatasheet.lcsc.com%2Flcsc%2F2103191913_Hangzhou-Silan-Microelectronics-SGT50T65FD1PN_C2761787.pdf

If I missed any information I will provide it as soon as I can.

Offline Power-Max

  • High Voltage Enthusiast
  • *
  • Posts: 16
  • Karma: +1/-0
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #1 on: June 03, 2021, 01:33:54 AM »
The thermal resistance is 0.53 K/W which is pretty bad IMHO. I got some ON semi 60N65 parts with a thermal resistance of 0.25 K/W. I've also seen TO-220 package devices with lower thermal resistances. This matters when you are dissipating a good deal of power due to hard switching or high RMS currents.

Offline Weston

  • High Voltage Technician
  • ***
  • Posts: 132
  • Karma: +11/-0
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #2 on: June 03, 2021, 08:31:07 AM »
Interesting. First time I have seen Chinese IGBTs. I wonder how much of the IP is home grown...

The switching loss seems slightly high compared to some other IGBT datasheets I have looked at, but nothing that bad. And a DRSSTC gets close to zero current switching, so switching losses should be low anyways.

The thermal resistance of 0.53 K/W implies the die is relatively small, so pulsed power will be more limited. However, the datasheet has no plot of transient thermal impedance so you can not directly compare with other IGBTs.

As IGBT technology has improved the die size has become smaller, so most IGBTs on the market have a smaller die and worse tolerance for abuse than the IGBTs people were using 10 years ago or whatever.

Nothing about these IGBTs seems obviously bad. They should work ok in a small DRSSTC. At less than $1 a pop you might as well buy them and see how they work.

My biggest concern would be that the datasheet has more "optimistic" values than what people are typically used to.

Offline rikkitikkitavi

  • High Voltage Technician
  • ***
  • Posts: 127
  • Karma: +2/-0
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #3 on: June 04, 2021, 08:44:31 AM »
The thermal resistance is 0.53 K/W which is pretty bad IMHO. I got some ON semi 60N65 parts with a thermal resistance of 0.25 K/W. I've also seen TO-220 package devices with lower thermal resistances. This matters when you are dissipating a good deal of power due to hard switching or high RMS currents.

Does it really matter, considering thermal transfer package to heatsink is limited , especially if you use some form of insulation and not just grease the surfaces?Even the attachment of the capsule has significance. Making the heatsink slightly larger so that the sum of thermal resistance stays the same is easy. 

Especially some manufacturers states ridicuosly high power capabilites based on theoretical calculations. I mean, 350W in a TO-220? Seriously?

But I say as previous, are the datasheets trustworthy?


A man can not have too many variacs

Offline Steve Ward

  • High Voltage Enthusiast
  • *
  • Posts: 48
  • Karma: +14/-1
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #4 on: June 09, 2021, 09:15:22 PM »
Quote
Does it really matter, considering thermal transfer package to heatsink is limited , especially if you use some form of insulation and not just grease the surfaces?Even the attachment of the capsule has significance. Making the heatsink slightly larger so that the sum of thermal resistance stays the same is easy.

Especially some manufacturers states ridicuosly high power capabilites based on theoretical calculations. I mean, 350W in a TO-220? Seriously?

This dissipation rating or Rth j-c is mostly indicative of how large the actual semiconductor is, so one with half the Rth (or 2X the Pdiss) is indeed about twice the area and consequently will have more volume to absorb the high power losses in pulsed applications.  The dissipation rating is obtained by assuming 25*C tab/interface temperature with Tjmax (150 or 175*C typically) applied to the junction and measuring the power flow from the chip, so its not a "practical use" rating, but still a reasonable metric to compare by. 

So even though the Rth of the device itself is only a small portion of the total thermal resistance stackup (typical TO-247 insulator might be ~1*C/W) the fact that its a bigger chip inside means it has lower transient thermal impedance and will handle greater pulse power.  Even for non-pulse power designs, it can really help to pick the biggest chip size for a given package to increase the power density of a design, and some designs really can appreciate the .2 to .5 *C/W reduction of going from a wimpy device to a strong one.

Offline Power-Max

  • High Voltage Enthusiast
  • *
  • Posts: 16
  • Karma: +1/-0
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #5 on: June 10, 2021, 04:50:34 AM »
Quote
Does it really matter, considering thermal transfer package to heatsink is limited , especially if you use some form of insulation and not just grease the surfaces?Even the attachment of the capsule has significance. Making the heatsink slightly larger so that the sum of thermal resistance stays the same is easy.

Especially some manufacturers states ridicuosly high power capabilites based on theoretical calculations. I mean, 350W in a TO-220? Seriously?

This dissipation rating or Rth j-c is mostly indicative of how large the actual semiconductor is, so one with half the Rth (or 2X the Pdiss) is indeed about twice the area and consequently will have more volume to absorb the high power losses in pulsed applications.  The dissipation rating is obtained by assuming 25*C tab/interface temperature with Tjmax (150 or 175*C typically) applied to the junction and measuring the power flow from the chip, so its not a "practical use" rating, but still a reasonable metric to compare by. 

So even though the Rth of the device itself is only a small portion of the total thermal resistance stackup (typical TO-247 insulator might be ~1*C/W) the fact that its a bigger chip inside means it has lower transient thermal impedance and will handle greater pulse power.  Even for non-pulse power designs, it can really help to pick the biggest chip size for a given package to increase the power density of a design, and some designs really can appreciate the .2 to .5 *C/W reduction of going from a wimpy device to a strong one.
'
I agree 100%.

I have also found from experience that some PMOS transistors I have, tend to tolerate a bit more abuse than equally current-rated NMOS devices, I expect it's because NMOS has approx. 3 times better electron mobility which means the die size is physically smaller for the same current handling. Smaller die also means smaller parasitic capacitance. This is especailly true for GaN or SiC devices. If you pick one with the same current rating as the silicon one, the die will be smaller and not be as tolerant to abuse. The capacitance and gate charge figures are also reasonable metrics to go by when trying to judge die size. It would be nice if manufactures just straight up specified the thermal impedance rather than steady-state thermal resistance. I suppose they sort-of do in a roundabout way via the Safe Operating Area graph.

Offline rikkitikkitavi

  • High Voltage Technician
  • ***
  • Posts: 127
  • Karma: +2/-0
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #6 on: June 10, 2021, 02:12:07 PM »
 
Good points from previous posts, thanks for that.

Does the thermal impedance really differ that much for shorter periods of time? What is the actual weight of a silicon die? 50-100mg ?
A chip with a load of 50W thermal (DC) how much does it matter when the load pulse is measured in Joules?

I have not done the math, or studied the thermal impedance curves (not so common in the datasheets) for different transistors. But I can imagine that doubling the die must mean some type of increased transient capacity even if not perhaps doubling is reachable due to other constrains like bonding wires popping like fuses ...

For sure a lot of R/D has been put into shrinking dies so that the semiconductors get more dies out of a wafer, which means more profit and hence they tend to have lower margin for abuse.

Atleast is cheaper to use two transistors than one to half the thermal resistance than a larger heatsink in most cases atleast for DC or low frequency applications (considering load share is equal) .But that is not really relevant in this case.

« Last Edit: June 10, 2021, 02:15:47 PM by rikkitikkitavi »
A man can not have too many variacs

Offline Weston

  • High Voltage Technician
  • ***
  • Posts: 132
  • Karma: +11/-0
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #7 on: June 10, 2021, 08:19:40 PM »
It would be nice if manufactures just straight up specified the thermal impedance rather than steady-state thermal resistance. I suppose they sort-of do in a roundabout way via the Safe Operating Area graph.

Most manufactures do provide this in the form of the transient thermal impedance plot. The Chinese IGBTs do not, but what do you expect from budget parts.

Here is a typical example:



The real challenge is then figuring out what the allowable delta T is. Even if you stay below the maximum junction temperature, repeated temperature cycling stresses the die attach material and can relatively quickly cause failure. The product literature on it is surprisingly spotty.

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 487
  • Karma: +25/-0
    • View Profile
Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #8 on: June 10, 2021, 11:51:17 PM »
Micross have a few datasheets for die-only IGBTs, for example the following:
https://shop.micross.com/pdf/fairchild/igbt/FGY75N60SM_IGBT_DIE.pdf
You could easily work out the volume and thus mass of the silicon from the measurements given (doping can be ignored, just use the specific gravity of pure silicon). Note that this particular IGBT is rather thin (I believe due to the technology used). The equivalent packaged (with diode die as well) is the FGY75N60SMD, so you can compare with the info and thermal impedance graphs from the packaged part datasheet.
The "60A" datasheet is also available (https://shop.micross.com/pdf/fairchild/igbt/FGA60N65SM_IGBT_DIE.pdf) - I believe that this is basically the die used in the famous FGH60N60SMD (it seems to be the 650V "FGA" version, but that datasheet is almost identical to the 600V "FGH" version other than the voltage rating, so I suspect it's the same or very similar die).

On another note, the die size specs above (and judicious use of a belt sander) were very useful in checking whether my very cheap Aliexpress FGY75N60SMD IGBTs were legit - I have a thread on this elsewhere on the boards (the short version was that the die size exactly matched and they also tested/worked fine).

High Voltage Forum

Re: Why are SGT50T65FD1PN soo cheap on lcsc?
« Reply #8 on: June 10, 2021, 11:51:17 PM »

 


* Recent Topics and Posts

post Re: Re-chargeable 1.5 volt lithium ion AAA batteries
[General Chat]
MRMILSTAR
Today at 04:47:35 AM
post Re: Re-chargeable 1.5 volt lithium ion AAA batteries
[General Chat]
davekni
Today at 03:59:27 AM
post Re: Kaizer VTTC 1
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
March 28, 2024, 09:15:11 PM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
Alberto
March 28, 2024, 01:01:12 PM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 28, 2024, 05:47:34 AM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
davekni
March 28, 2024, 04:45:07 AM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
MRMILSTAR
March 28, 2024, 04:18:27 AM
post Push Pull VTTC
[Vacuum Tube Tesla Coils (VTTC)]
janno288
March 28, 2024, 01:10:08 AM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
Alberto
March 27, 2024, 10:54:52 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
markus
March 27, 2024, 11:53:42 AM
post Re: OCD Triggering Early + Low Output
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 27, 2024, 05:14:36 AM
post Re: Is the UD2.7C under voltage lock out basically worthless?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 27, 2024, 04:47:48 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 27, 2024, 04:41:59 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 27, 2024, 12:04:34 AM
post Re: Super flat QCW simulation (does this look reasonable?)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
toooldforthis
March 26, 2024, 11:08:14 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 26, 2024, 11:07:20 PM
post Re: Is the UD2.7C under voltage lock out basically worthless?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 26, 2024, 10:46:29 PM
post OCD Triggering Early + Low Output
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Saattvik24
March 26, 2024, 09:03:43 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 26, 2024, 08:46:59 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 26, 2024, 05:02:18 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 26, 2024, 03:16:03 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
Anders Mikkelsen
March 26, 2024, 01:41:49 PM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 26, 2024, 04:48:22 AM
post Re: Re-chargeable 1.5 volt lithium ion AAA batteries
[General Chat]
MRMILSTAR
March 26, 2024, 04:16:37 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 26, 2024, 04:16:24 AM
post Re: Smoke Screen Machine Protect 950 XP - Teardown of a Smoke Cannon!
[Electronic Circuits]
davekni
March 26, 2024, 04:13:02 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 26, 2024, 04:00:43 AM
post Re: Re-chargeable 1.5 volt lithium ion AAA batteries
[General Chat]
davekni
March 26, 2024, 03:19:18 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
March 26, 2024, 01:50:42 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 25, 2024, 08:05:02 PM
post Re: Smoke Screen Machine Protect 950 XP - Teardown of a Smoke Cannon!
[Electronic Circuits]
Mads Barnkob
March 25, 2024, 07:41:29 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 25, 2024, 06:45:46 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 25, 2024, 05:44:25 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
Anders Mikkelsen
March 25, 2024, 04:47:17 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 25, 2024, 04:27:22 PM
post Re-chargeable 1.5 volt lithium ion AAA batteries
[General Chat]
MRMILSTAR
March 25, 2024, 03:57:34 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
markus
March 25, 2024, 02:06:41 PM
post Re: Odd MOSFET Driver Behavior
[Solid State Tesla Coils (SSTC)]
KrisPringle
March 25, 2024, 04:43:25 AM
post Re: Odd MOSFET Driver Behavior
[Solid State Tesla Coils (SSTC)]
davekni
March 25, 2024, 02:39:40 AM
post Re: Odd MOSFET Driver Behavior
[Solid State Tesla Coils (SSTC)]
KrisPringle
March 25, 2024, 12:47:09 AM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
Alberto
March 24, 2024, 07:36:32 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
Alberto
March 24, 2024, 07:27:24 PM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
MRMILSTAR
March 24, 2024, 04:25:23 AM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
Alberto
March 23, 2024, 10:47:35 PM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
MRMILSTAR
March 23, 2024, 09:30:21 PM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
Alberto
March 23, 2024, 04:34:31 PM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
MRMILSTAR
March 23, 2024, 03:04:25 PM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
Alberto
March 23, 2024, 01:38:34 PM
post Re: capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
MRMILSTAR
March 23, 2024, 04:20:03 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
davekni
March 23, 2024, 12:54:30 AM
post Re: Smoke Screen Machine Protect 950 XP - Teardown of a Smoke Cannon!
[Electronic Circuits]
davekni
March 23, 2024, 12:05:57 AM
post capacitor and diodes. Voltage values for a CW
[Voltage Multipliers]
Alberto
March 22, 2024, 11:45:03 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
OmGigaTron
March 22, 2024, 11:30:09 PM
post Smoke Screen Machine Protect 950 XP - Teardown of a Smoke Cannon!
[Electronic Circuits]
Mads Barnkob
March 22, 2024, 10:20:35 PM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Benbmw
March 22, 2024, 09:21:13 PM
post Re: What actually kills MOSFETs?
[Beginners]
AstRii
March 22, 2024, 03:37:11 PM
post What actually kills MOSFETs?
[Beginners]
FPS
March 22, 2024, 05:09:20 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 22, 2024, 03:57:54 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 22, 2024, 02:59:25 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 21, 2024, 06:31:42 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
rikkitikkitavi
March 21, 2024, 03:08:01 PM
post Re: [WTS] IGBT, Ferrite, Capacitors, Tools, PSU, Industrial components and parts
[Sell / Buy / Trade]
Mads Barnkob
March 21, 2024, 01:37:32 PM
post Re: Difference between these transformers
[Transformer (Ferrite Core)]
Alberto
March 21, 2024, 11:42:07 AM
post Re: Phase Lead Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 21, 2024, 04:09:14 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 21, 2024, 02:15:31 AM
post My Homemade Structural Analysis X-Ray Machine
[X-ray]
Luca c.
March 21, 2024, 01:35:40 AM
post Re: Phase Lead Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Saattvik24
March 20, 2024, 10:40:00 PM
post Re: Difference between these transformers
[Transformer (Ferrite Core)]
Mads Barnkob
March 20, 2024, 08:03:41 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Mads Barnkob
March 20, 2024, 07:51:57 PM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 20, 2024, 10:39:47 AM
post Re: Phase Lead Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 20, 2024, 04:09:59 AM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 20, 2024, 01:13:23 AM
post Re: Phase Lead Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 20, 2024, 12:45:16 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 20, 2024, 12:30:30 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 19, 2024, 11:12:24 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 19, 2024, 09:47:49 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 19, 2024, 09:44:19 PM
post Phase Lead Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Saattvik24
March 19, 2024, 06:52:09 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 19, 2024, 05:02:44 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Mads Barnkob
March 19, 2024, 05:01:41 PM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 19, 2024, 04:31:02 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 19, 2024, 03:59:54 PM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 19, 2024, 06:41:39 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
davekni
March 19, 2024, 04:05:49 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
OmGigaTron
March 18, 2024, 09:08:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 09:07:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
Twospoons
March 18, 2024, 08:57:06 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
MRMILSTAR
March 18, 2024, 03:51:33 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:59:46 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:33:25 PM
post Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 11:02:12 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Twospoons
March 18, 2024, 02:36:11 AM
post Re: Best forum for vacuum tube amplifiers?
[General Chat]
Mads Barnkob
March 17, 2024, 07:42:55 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:15:14 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 05:05:04 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
davekni
March 17, 2024, 04:50:51 AM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Twospoons
March 17, 2024, 04:45:17 AM
post 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:17:51 AM
post Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Terry
March 17, 2024, 01:29:32 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 17, 2024, 12:33:06 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal