Author Topic: Prototype boards  (Read 230 times)

Offline Da_Stier

  • High Voltage Experimenter
  • **
  • Posts: 97
  • Karma: +7/-0
    • View Profile
Prototype boards
« on: May 02, 2021, 04:27:33 PM »
Hi,

since a lot of prototype and Perfboards are pretty expensive (atleast in my opinion) and pretty bad quality, I decided to make my own a long time ago.
I figured, that some of them might be intersting for some of you as well.

Feel free, to get some made for yourself, but please don't sell them to make profit.


1: A 100x160mm throughole card (Eurokarte).
It has a guardring with via stitching all around, has .1inch pitch and all holes are plated througholes.
The mounting holes are 3.5mm for M3.



* Eurokarte-Lochraster_Gerber.zip



2: Smaller throughole cards on a 100x160mm panel.



* Lochraster_v_score_Gerber.zip



3: A SMD protoype board. The board is made for 0805 and 0603 components.
the size of the board is 50x100mm.
The sqares are 2mm by 2mm and have a .1inch pitch.
They work very well for combined SMD and throughhole prototypes.
The gerbers have two of them combined into a 100x100mm panel.





* SMD-Gerber-double.zip



4: some 50Ohm coplanar waveguide strips.
I use them in RF prototypes. They work well for making filters.
They are measured up to 3GHz on a HP8753 VNA and work well in this range.
The panel contains 12 100mm strips.





* coplanar-Gerber-panel.zip



5: some SOIC8 breakouts.
They have an exposed pad and a GND plane on the back.
The panel includes 45 pieces.





* SOIC8-Gerber-panel.zip



Each of these boards has been ordered from JLC and Elecrow without any issues.
I like the ENIG finish but they work with any finish of course.

I hope some of you can use some of them. :)



Greetings,
Michael

Offline TMaxElectronics

  • High Voltage Technician
  • ***
  • Posts: 181
  • Karma: +11/-0
    • View Profile
    • My random (and very empty) electronics blog
Re: Prototype boards
« Reply #1 on: May 02, 2021, 07:37:08 PM »
Thanks for sharing :)  I'll definitely order a whole bunch of every version, they look good.

It might be interesting to add not-plated holes between the pads of the SMD version. Then it would be easy to get a good ground even in the middle of a circuit.

Offline Da_Stier

  • High Voltage Experimenter
  • **
  • Posts: 97
  • Karma: +7/-0
    • View Profile
Re: Prototype boards
« Reply #2 on: May 02, 2021, 09:15:02 PM »
Thanks, great you like them.  :)

That is actually a pretty good idea.
I didn't have any grounding issues yet but why not.

So here is a version of the SMD prototyping board with 1mm non plated holes between all the pads.
Of course I don't have a photo of one so the 3D preview must be enough.  ;)



* SMD-holes-Gerber-double.zip






Greetings,
Michael

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1721
  • Karma: +41/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Prototype boards
« Reply #3 on: May 02, 2021, 09:20:23 PM »
Thanks for sharing these great prototyping PCB designs!

I will also add them on my next PCB order :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

High Voltage Forum

Re: Prototype boards
« Reply #3 on: May 02, 2021, 09:20:23 PM »

 


* Recent Topics and Posts

post Primary Current Bounce
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
Today at 04:51:01 PM
post Re: Video overview of my SGTC control cabinet
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
Today at 05:44:19 AM
post Re: Optimum Secondary Winding
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
Today at 04:09:37 AM
post Re: SGTC tesla coil:Why is it so dangerous ?
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
May 17, 2021, 11:13:57 PM
post Re: Video overview of my SGTC control cabinet
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
May 17, 2021, 10:57:00 PM
post Re: My 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
MRMILSTAR
May 17, 2021, 10:29:06 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
johnf
May 17, 2021, 08:52:28 PM
post Re: My 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
DashApple
May 17, 2021, 08:50:26 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
davekni
May 17, 2021, 08:36:30 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
johnf
May 17, 2021, 09:12:41 AM
post Re: Safe source for High Voltage Wire?
[General Chat]
johnnyzoo
May 17, 2021, 08:58:05 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
tophat
May 17, 2021, 01:20:45 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Steve Ward
May 17, 2021, 12:34:04 AM
post Video overview of my SGTC control cabinet
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
May 16, 2021, 11:19:58 PM
post Re: Neon power supply + voltage multiplier producing too much voltage
[Beginners]
davekni
May 16, 2021, 08:56:57 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
Mads Barnkob
May 16, 2021, 08:38:37 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Max
May 16, 2021, 08:07:38 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
TF3
May 16, 2021, 07:50:10 PM
post Re: Safe source for High Voltage Wire?
[General Chat]
Da_Stier
May 16, 2021, 07:29:32 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Max
May 16, 2021, 03:18:09 PM
post Safe source for High Voltage Wire?
[General Chat]
MrScrOggs
May 16, 2021, 03:02:40 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
dbach
May 16, 2021, 02:24:18 PM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Mads Barnkob
May 16, 2021, 12:29:47 PM
post Re: 833A Cathode Modulation
[Vacuum Tube Tesla Coils (VTTC)]
pc50kd
May 16, 2021, 12:21:23 PM
post Re: Neon power supply + voltage multiplier producing too much voltage
[Beginners]
Davide
May 16, 2021, 08:08:29 AM
post Re: MOSFET Protection in SSTC
[Solid State Tesla Coils (SSTC)]
Gisho
May 16, 2021, 07:34:48 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
TF3
May 16, 2021, 03:36:13 AM
post Magnetic spin top drive
[Electronic Circuits]
haversin
May 16, 2021, 02:58:36 AM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
May 16, 2021, 02:27:45 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 16, 2021, 02:13:58 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
dbach
May 16, 2021, 01:28:45 AM
post Re: Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Mads Barnkob
May 15, 2021, 11:20:12 PM
post Huge IGBTs (looking for a home)
[Sell / Buy / Trade]
Steve Ward
May 15, 2021, 10:20:31 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
May 15, 2021, 08:51:28 PM
post Re: TV cameras and DRSSTC(how do they go together)
[General Chat]
Mads Barnkob
May 15, 2021, 08:39:59 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
May 15, 2021, 06:22:43 PM
post TV cameras and DRSSTC(how do they go together)
[General Chat]
Miki_407
May 15, 2021, 03:53:10 PM
post Re: Tiny Counterpoise
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
May 15, 2021, 02:48:19 PM
post Re: Secondary Resonant Circuit Size
[Beginners]
Uspring
May 15, 2021, 02:28:23 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
May 15, 2021, 01:11:38 PM
post Re: [WTB] Looking for bus capacitors
[Sell / Buy / Trade]
dbach
May 15, 2021, 01:02:21 PM
post Re: [WTB] Looking for bus capacitors
[Sell / Buy / Trade]
Mads Barnkob
May 15, 2021, 07:43:47 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
May 15, 2021, 06:47:43 AM
post Re: Tiny Counterpoise
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 15, 2021, 06:11:05 AM
post Tiny Counterpoise
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
May 15, 2021, 03:01:14 AM
post [WTB] Looking for bus capacitors
[Sell / Buy / Trade]
dbach
May 15, 2021, 01:58:59 AM
post Re: Secondary Resonant Circuit Size
[Beginners]
benet
May 15, 2021, 01:50:52 AM
post Re: Igbt question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
May 14, 2021, 10:27:17 PM
post Re: Igbt question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
May 14, 2021, 10:22:53 PM
post Igbt question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
May 14, 2021, 09:05:19 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal