Author Topic: Which power supply should i use for my spark gap tesla coil  (Read 4273 times)

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Hello im Nex, im currently building my first spark gap tesla coil. I am looking for a power supply. Im looking for something around 450-500 Watts of power and it has to be powered by 220v 50hz. I dont want it to be an NST since i cant find any affordable ones in my price range and countries shops plus MOTS in my country are needed so the scrapyard sells one for almost 60 us dollars any ideas what i could use. ive been at car ignition coils but i dont know since their also hard to find.
 :)

Contact Me Personally at: noahstoessel@icloud.com
Sincerely, Electro Nex

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 571
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #1 on: May 30, 2023, 04:05:24 PM »
For a SGTC these are your possibilities that I am aware of:

1. NST
2. MOT
3. OBIT (oil burner ignition transformer)
4. Instrumentation transformer
5. Distribution transformer (pole transformer)

Unfortunately, if $60 is too expensive then I don't think you can use any of these. Maybe you will get lucky and find a discarded one.
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #2 on: May 30, 2023, 06:32:46 PM »
Hi Nex,
The cheapest option is the MOT for sure but it comes with its downsides. They don't really have the voltage to fire the spark gap and they get way to hot. The large current output also heats up your spark gap. OBITs deliver the necessary voltage but they are designed for short operation. My OBIT died after about 2 minutes due to secondary overheating. My advice is to get an (old) and cheap NST because they have the voltage and the ability to operate continiously. Since most NST hardly reach the 500W mark and you probably want something more powerful, you can add multiple in parallel.

Greetings,
Felix

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #3 on: May 30, 2023, 06:35:22 PM »
For a SGTC these are your possibilities that I am aware of:

1. NST
2. MOT
3. OBIT (oil burner ignition transformer)
4. Instrumentation transformer
5. Distribution transformer (pole transformer)

Unfortunately, if $60 is too expensive then I don't think you can use any of these. Maybe you will get lucky and find a discarded one.

if it is possible could you give me a site that sells NST's for 60 dollars since the NST im looking at are between 250-600 dollars a piece

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #4 on: May 30, 2023, 06:36:54 PM »
Hi Nex,
The cheapest option is the MOT for sure but it comes with its downsides. They don't really have the voltage to fire the spark gap and they get way to hot. The large current output also heats up your spark gap. OBITs deliver the necessary voltage but they are designed for short operation. My OBIT died after about 2 minutes due to secondary overheating. My advice is to get an (old) and cheap NST because they have the voltage and the ability to operate continiously. Since most NST hardly reach the 500W mark and you probably want something more powerful, you can add multiple in parallel.

Greetings,
Felix

understood do you have any recommendations for a budget of around 100-150 dollar budget max

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #5 on: May 30, 2023, 08:02:34 PM »
You should spend your money on the transformer because in my oppinion it's the most crucial part of small SGTCs since larger coils require a larger budget. You can for example make your tank cap from tinfoil and beer bottles which costs nothing. The transformer however is the base for a good operation. If you spend some time on ebay, you will find a NST for cheap. Please don't expect any large results like 1m arcs with a budget tesla coil.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #6 on: May 30, 2023, 08:15:12 PM »
You should spend your money on the transformer because in my oppinion it's the most crucial part of small SGTCs since larger coils require a larger budget. You can for example make your tank cap from tinfoil and beer bottles which costs nothing. The transformer however is the base for a good operation. If you spend some time on ebay, you will find a NST for cheap. Please don't expect any large results like 1m arcs with a budget tesla coil.

i have discovered a good power supply only 420 watts but when i need more power i can always order another one  its 420 watts but should work just fine: Allanson SS1235ICH my only concern is that it needs a 120v input so i will need to buy a good very effective stepdown transformer since it demands high current input does it look good to you

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #7 on: May 30, 2023, 08:30:51 PM »
The transformer itself looks good. 12kV at 35mA is quite nice. I would however think twice since you live in a 220V country. Try to find one with a fitting primary voltage because in the end it'll probably be cheaper.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #8 on: May 30, 2023, 08:41:34 PM »
The transformer itself looks good. 12kV at 35mA is quite nice. I would however think twice since you live in a 220V country. Try to find one with a fitting primary voltage because in the end it'll probably be cheaper.
will do thanks for all the help btw will try to look for something

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #9 on: May 30, 2023, 08:48:34 PM »
The transformer itself looks good. 12kV at 35mA is quite nice. I would however think twice since you live in a 220V country. Try to find one with a fitting primary voltage because in the end it'll probably be cheaper.
You should spend your money on the transformer because in my oppinion it's the most crucial part of small SGTCs since larger coils require a larger budget. You can for example make your tank cap from tinfoil and beer bottles which costs nothing. The transformer however is the base for a good operation. If you spend some time on ebay, you will find a NST for cheap. Please don't expect any large results like 1m arcs with a budget tesla coil.

thank you for making me look farther i found something close enough 12kv 30mA plus its shipping from germany with amazon prime so i think this will be the one i go with https://www.amazon.de/-/en/EVTSCAN-NP-12000-30-Electronic-Transformer-Supply/dp/B092ZW4WWB/ref=sr_1_11?crid=30VQ74L8RC55S&keywords=neon+sign+transformer&qid=1685472264&sprefix=neon+sign+transformer%2Caps%2C128&sr=8-11 could you just confirm if this will work before i order it plus i like that its 220-240v input

Offline alan sailer

  • High Voltage Engineer
  • ****
  • Posts: 314
  • Karma: +18/-1
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #10 on: May 30, 2023, 09:19:37 PM »
Sorry that used NST are so expensive.

I don't know for a fact, but many modern electronic neon sign transformers have a lot of fault protection circuitry. This MAY mean that it will not react well to the more chaotic SGTC environment...

Sorry that I can't give you a more definitive answer.

In my own case I bought several of these modern high frequency neon sign supplies and they turn out to be useless for powering plasma tubes because of the fault circuity. They would start up, not get the expected load and shut down.

Cheers.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #11 on: May 30, 2023, 09:22:10 PM »
Sorry that used NST are so expensive.

I don't know for a fact, but many modern electronic neon sign transformers have a lot of fault protection circuitry. This MAY mean that it will not react well to the more chaotic SGTC environment...

Sorry that I can't give you a more definitive answer.

In my own case I bought several of these modern high frequency neon sign supplies and they turn out to be useless for powering plasma tubes because of the fault circuity. They would start up, not get the expected load and shut down.

Cheers.

thank you very much with the help a nice guy on this forum i have been able to find something cheap and effective but thanks for the advice

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #12 on: May 30, 2023, 11:03:31 PM »
Yeah alan is right! That's why I wrote (old) just because the old designs are more resistent to abuse. Try to get an old one in good shape. You can find an example of a NST I would buy in the link: https://www.ebay.com/itm/115811984481?hash=item1af6eea461:g:SmEAAOSwdWNka7zB . If you allready bought the one you mentioned, it'll work fine I think. Just keep an eye on the clock while running and don't let it run for too long.
« Last Edit: May 30, 2023, 11:05:43 PM by Felix M. »

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #13 on: May 30, 2023, 11:06:42 PM »
Yeah alan is right! That's why I wrote (old) just because the old designs are more resistent to abuse. Try to get an old one in good shape. You can find an example of a NST I would buy in the link: https://www.ebay.com/itm/115811984481?hash=item1af6eea461:g:SmEAAOSwdWNka7zB . If you allready bought the one you mentioned, it'll work fine I think. Just keep an eye on the clock while running and don't let it run for too long.
let me look at some stuff my look for something soviet idk

Offline Felix M.

  • High Voltage Experimenter
  • **
  • Posts: 74
  • Karma: +1/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #14 on: May 30, 2023, 11:20:23 PM »
Most of the time you get really nice things from the soviet union when it comes to electronic components. Back then they produced large vacuum tubes, pulse capacitors, doorknob capacitors, etc...
The best thing is they are cheap relative to the components you get today.

Offline ElectroNex

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #15 on: May 30, 2023, 11:21:52 PM »
Most of the time you get really nice things from the soviet union when it comes to electronic components. Back then they produced large vacuum tubes, pulse capacitors, doorknob capacitors, etc...
The best thing is they are cheap relative to the components you get today.
couldnt find anything old with the ratings i need either too underpowered or in very very rough condition so idk

Offline NyaaX_X

  • High Voltage Technician
  • ***
  • Posts: 130
  • Karma: +2/-0
    • View Profile
Re: Which power supply should i use for my spark gap tesla coil
« Reply #16 on: May 31, 2023, 04:25:19 AM »
If you are making a little SGTC. You can use a "ZVS oscillator". And the high voltage transformer can choose an arc welding machine or CRT TV "Flyback transformer".

High Voltage Forum

Re: Which power supply should i use for my spark gap tesla coil
« Reply #16 on: May 31, 2023, 04:25:19 AM »

 


* Recent Topics and Posts

post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
Today at 01:33:37 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
Today at 12:17:32 AM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
davekni
July 11, 2024, 07:38:26 PM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
klugesmith
July 11, 2024, 06:30:00 PM
post LOD Non Resonant SSTC?
[Solid State Tesla Coils (SSTC)]
ColinHeath
July 11, 2024, 06:08:30 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 11, 2024, 12:24:56 PM
post Re: Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 11, 2024, 06:42:23 AM
post Re: Syntherrupter Lightsaber Sender Programming
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 11, 2024, 05:46:07 AM
post Syntherrupter Lightsaber Sender Programming
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 11, 2024, 05:26:51 AM
post Re: Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 11, 2024, 02:50:54 AM
post Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coupling
July 11, 2024, 12:59:55 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
July 10, 2024, 07:10:34 PM
post Re: Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 10, 2024, 06:52:42 PM
post Re: Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 10, 2024, 06:28:19 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 10, 2024, 01:34:09 PM
post Re: Silicon(e) plasma
[General Chat]
alan sailer
July 10, 2024, 12:09:06 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 09, 2024, 11:52:00 PM
post Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 09, 2024, 07:37:22 PM
post Re: Silicon(e) plasma
[General Chat]
MechatEng2023
July 09, 2024, 07:30:05 PM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 09, 2024, 03:30:49 AM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 09, 2024, 12:51:02 AM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 08, 2024, 11:30:44 PM
post Re: Why so cheap?
[General Chat]
alan sailer
July 08, 2024, 10:57:10 PM
post UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 08, 2024, 10:21:01 PM
post Why so cheap?
[General Chat]
MRMILSTAR
July 08, 2024, 09:55:24 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 08, 2024, 09:18:21 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 08, 2024, 05:17:49 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 08, 2024, 04:49:20 PM
post Re: Tesla coil in FEMM
[Beginners]
Simranjit
July 08, 2024, 04:28:43 AM
post Re: Tesla coil in FEMM
[Beginners]
davekni
July 08, 2024, 04:06:53 AM
post Tesla coil in FEMM
[Beginners]
Simranjit
July 08, 2024, 03:46:49 AM
post Re: Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 08, 2024, 02:42:00 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 08, 2024, 01:37:55 AM
post Re: First DRSSTC Build- Issues with Fibernet project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Sebigamer
July 08, 2024, 12:53:08 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 08, 2024, 12:49:48 AM
post Re: Silicon(e) plasma
[General Chat]
alan sailer
July 07, 2024, 11:15:35 PM
post Silicon(e) plasma
[General Chat]
MechatEng2023
July 07, 2024, 11:04:43 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 07, 2024, 09:39:07 PM
post Re: First DRSSTC Build- Issues with Fibernet project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 07, 2024, 05:32:56 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 07, 2024, 02:52:19 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 07, 2024, 02:50:04 PM
post Re: Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 07, 2024, 02:20:11 PM
post Teardown of a APC SmartUPS VT 40 kVA
[Electronic Circuits]
Mads Barnkob
July 07, 2024, 10:02:22 AM
post First DRSSTC Build- Issues with Fibernet project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Sebigamer
July 07, 2024, 09:23:58 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 07, 2024, 12:44:53 AM
post Re: FEMM tesla coil simulation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 07, 2024, 12:08:50 AM
post Re: FEMM tesla coil simulation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 06, 2024, 10:35:49 PM
post FEMM tesla coil simulation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 06, 2024, 09:42:43 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 06, 2024, 06:06:23 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 06, 2024, 10:21:16 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 06, 2024, 10:15:42 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 06, 2024, 04:53:56 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 06, 2024, 04:42:16 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 06, 2024, 04:09:50 AM
post Re: Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 06, 2024, 03:07:11 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 06, 2024, 03:05:18 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 06, 2024, 02:37:16 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 06, 2024, 02:20:14 AM
post QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 06, 2024, 01:55:14 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 05, 2024, 11:50:37 PM
post Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 05, 2024, 10:07:04 PM
post 230v Tesla coil and krypton gas
[Spark Gap Tesla Coils (SGTC)]
gravitysrainbow
July 05, 2024, 07:13:25 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 05, 2024, 06:17:13 PM
post Re: Phase lead inductors
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
July 04, 2024, 11:40:45 PM
post Re: Sling Psychrometer
[Laboratories, Equipment and Tools]
Twospoons
July 04, 2024, 11:02:32 PM
post Phase lead inductors
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 04, 2024, 06:28:08 PM
post Re: Sling Psychrometer
[Laboratories, Equipment and Tools]
klugesmith
July 04, 2024, 12:31:40 AM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 04, 2024, 12:07:21 AM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 04, 2024, 12:06:17 AM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
July 03, 2024, 10:51:23 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 03, 2024, 09:44:14 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 03, 2024, 08:48:13 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 03, 2024, 08:24:50 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 03, 2024, 08:12:55 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 03, 2024, 07:29:53 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 03, 2024, 07:21:38 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 03, 2024, 05:05:39 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 03, 2024, 04:29:53 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 03, 2024, 04:09:11 PM
post FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 03, 2024, 02:47:18 PM
post Re: Eliminating discharges from a SSTC
[Solid State Tesla Coils (SSTC)]
Alex_1996
July 03, 2024, 01:35:24 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 03, 2024, 02:19:03 AM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 03, 2024, 01:19:50 AM
post Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 02, 2024, 11:29:18 PM
post Re: Is this a good pulse experiment capacitor?
[Capacitor Banks]
Mads Barnkob
July 02, 2024, 09:59:07 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 02, 2024, 09:55:53 PM
post Re: Capacitor wiring for single phase 240 to split phase (180 degree) 240v
[Capacitor Banks]
klugesmith
July 02, 2024, 09:44:55 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 02, 2024, 07:51:37 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 02, 2024, 06:14:07 PM
post Is this a good pulse experiment capacitor?
[Capacitor Banks]
FPS
July 02, 2024, 06:02:38 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 02, 2024, 11:37:46 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 02, 2024, 05:22:10 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
davekni
July 02, 2024, 05:16:30 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
drobotk
July 01, 2024, 11:50:12 PM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
klugesmith
July 01, 2024, 08:48:53 PM
post Uses for Weston's Little Bee probe
[Laboratories, Equipment and Tools]
klugesmith
July 01, 2024, 08:40:59 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
July 01, 2024, 08:09:42 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
davekni
June 30, 2024, 06:49:45 AM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
davekni
June 30, 2024, 03:57:13 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
June 30, 2024, 03:19:40 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal