Author Topic: More induction heating  (Read 12121 times)

Offline petespaco

  • High Voltage Engineer
  • ****
  • Posts: 273
  • Karma: +12/-0
    • View Profile
    • French Creek Valley Activities
Re: More induction heating
« Reply #40 on: March 10, 2023, 03:51:40 AM »
I suggest that you visit a website such as this one:
https://learnabout-electronics.org/PSU/psu12.php

Or:
https://www.physics.unlv.edu/~bill/PHYS483/power_supply_info.pdf
 or simply google:
"linear power supply design"   -since that appears to be what you want to use.


Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 185
  • Karma: +1/-0
    • View Profile
Re: More induction heating
« Reply #41 on: March 10, 2023, 09:48:10 AM »
I suggest that you visit a website such as this one:
https://learnabout-electronics.org/PSU/psu12.php

Or:
https://www.physics.unlv.edu/~bill/PHYS483/power_supply_info.pdf
 or simply google:
"linear power supply design"   -since that appears to be what you want to use.

Thank you!

EDIT: I have read the links. They explain very well how works the filter capacitors in a power supply. I have a idea about that. My problem is that I don´t know how much ripple is admisible to power the heater. I mean, of course the bigger the capacity the better but I don´t know how much it would be a acceptable value
« Last Edit: March 10, 2023, 02:47:24 PM by Alberto »

Online davekni

  • Executive Board Member
  • *******
  • Posts: 2826
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: More induction heating
« Reply #42 on: March 10, 2023, 08:38:36 PM »
Quote
I mean, of course the bigger the capacity the better but I don´t know how much it would be a acceptable value
For your induction heating application with separate gate supply, no filter capacitor is probably best choice.  Induction coil current will go up and down at 2x line frequency.  That is the way induction cook-tops work.  I had a 1kW ZVS oscillator that ran that way too, with rectified line voltage and no filter cap.
David Knierim

Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 185
  • Karma: +1/-0
    • View Profile
Re: More induction heating
« Reply #43 on: March 10, 2023, 09:42:29 PM »
Quote
I mean, of course the bigger the capacity the better but I don´t know how much it would be a acceptable value
For your induction heating application with separate gate supply, no filter capacitor is probably best choice.  Induction coil current will go up and down at 2x line frequency.  That is the way induction cook-tops work.  I had a 1kW ZVS oscillator that ran that way too, with rectified line voltage and no filter cap.

Thank you

Nice!! So I'll rewound the secondary of a MOT untill I get 35VDC after rectifying

Online davekni

  • Executive Board Member
  • *******
  • Posts: 2826
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: More induction heating
« Reply #44 on: March 11, 2023, 12:13:11 AM »
Just thought of one caution if using no filter caps on rectified transformer output:  Switch power on secondary side of transformer, either before or after rectifier.  If the transformer primary is switched off, transformer inductance will create a voltage spike.  MOTs are particularly bad in that respect, running large magnetization current, so producing large spikes when primary is disconnected.
If primary will be switched off with secondary connected, either a TVS diode or filter caps are needed to absorb the transient energy.  (The FETs may be able to handle that transient energy themselves.  However, if they are already running hot due to high load, then they have less avalanche energy capability.)
David Knierim

Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 185
  • Karma: +1/-0
    • View Profile
Re: More induction heating
« Reply #45 on: March 12, 2023, 09:04:53 AM »
Just thought of one caution if using no filter caps on rectified transformer output:  Switch power on secondary side of transformer, either before or after rectifier.  If the transformer primary is switched off, transformer inductance will create a voltage spike.  MOTs are particularly bad in that respect, running large magnetization current, so producing large spikes when primary is disconnected.
If primary will be switched off with secondary connected, either a TVS diode or filter caps are needed to absorb the transient energy.  (The FETs may be able to handle that transient energy themselves.  However, if they are already running hot due to high load, then they have less avalanche energy capability.)

Thank you!

And another (probably) silly question. I said 15v to the gates because the guy in the video uses that, and you suggest using 60ohm resistors. But I have a lot 12V and 5v powers supply. Could I use one of these? In that case, wich resistor I should use?


And about the capacitors for the oscillator I have read that i should use WIMA MKP, but I have KEMET MKP X2 SH. Is there s problem with that?

And last, could anyone recommend me a book about learning basic electronics? I know ohm's law, the behavior of pasive components and that things.  But I'd like to learn more for example to stop asking these questions haha
« Last Edit: March 12, 2023, 11:29:14 AM by Alberto »

Online davekni

  • Executive Board Member
  • *******
  • Posts: 2826
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: More induction heating
« Reply #46 on: March 12, 2023, 09:46:24 PM »
Quote
And another (probably) silly question. I said 15v to the gates because the guy in the video uses that, and you suggest using 60ohm resistors. But I have a lot 12V and 5v powers supply. Could I use one of these? In that case, wich resistor I should use?
If you have three 5v supplies, wire them in series for 15V.  That presumes they are not grounded (have 2-prong plugs, not 3-prong).
12V might be OK, not less.  Trade-offs of lower (or higher) gate supply are a bit complex.  If 12V, reduce gate resistance as much as possible while remaining under 2W, so around 40 ohms.

Quote
And about the capacitors for the oscillator I have read that i should use WIMA MKP, but I have KEMET MKP X2 SH. Is there s problem with that?
WIMA vs KEMET doesn't matter.  Different MKP capacitors are designed for different purposes.  You need high AC current capability.  X2 caps aren't great in that respect (usually).  You could try them with good fan cooling.  If some overheat and fail, then buy replacements.  Look at RMS current rating in spec's.

Quote
And last, could anyone recommend me a book about learning basic electronics? I know ohm's law, the behavior of pasive components and that things.  But I'd like to learn more for example to stop asking these questions haha
I'm not much help here, having learned electronics many decades ago.  I do recommend trying things in analog simulation.  There are some fairly simple on-line simulators, and simulation programs free to download and use.  My favorite is LTSpice.  Probably not the easiest for novice learning, however.  There is good online forum help for LTSpice.  Whatever simulator you try, start very simple.  Verify Ohm's law with a voltage source and resistor, etc.
David Knierim

Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 185
  • Karma: +1/-0
    • View Profile
Re: More induction heating
« Reply #47 on: March 12, 2023, 10:39:41 PM »
Quote
And another (probably) silly question. I said 15v to the gates because the guy in the video uses that, and you suggest using 60ohm resistors. But I have a lot 12V and 5v powers supply. Could I use one of these? In that case, wich resistor I should use?
If you have three 5v supplies, wire them in series for 15V.  That presumes they are not grounded (have 2-prong plugs, not 3-prong).
12V might be OK, not less.  Trade-offs of lower (or higher) gate supply are a bit complex.  If 12V, reduce gate resistance as much as possible while remaining under 2W, so around 40 ohms.

Quote
And about the capacitors for the oscillator I have read that i should use WIMA MKP, but I have KEMET MKP X2 SH. Is there s problem with that?
WIMA vs KEMET doesn't matter.  Different MKP capacitors are designed for different purposes.  You need high AC current capability.  X2 caps aren't great in that respect (usually).  You could try them with good fan cooling.  If some overheat and fail, then buy replacements.  Look at RMS current rating in spec's.

Quote
And last, could anyone recommend me a book about learning basic electronics? I know ohm's law, the behavior of pasive components and that things.  But I'd like to learn more for example to stop asking these questions haha
I'm not much help here, having learned electronics many decades ago.  I do recommend trying things in analog simulation.  There are some fairly simple on-line simulators, and simulation programs free to download and use.  My favorite is LTSpice.  Probably not the easiest for novice learning, however.  There is good online forum help for LTSpice.  Whatever simulator you try, start very simple.  Verify Ohm's law with a voltage source and resistor, etc.

Thank you!!

Ok, since it will be difficult to me find a problem if it appears, I´ll stick with the exact components to get the best result. I don´t have 15V supply and you say 12V is not sure to be OK, but I have a lot 19V laptop power supply. Can I use it with a bigger resistor? wich resistance?

Thank you, I think I´ll get banned from this forum for making this questions

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 721
  • Karma: +22/-0
    • View Profile
Re: More induction heating
« Reply #48 on: March 12, 2023, 11:43:38 PM »
You can take 19 V laptop PS and reduce voltage to 15 V with a single-IC voltage regulator.  Should begin with an estimate of maximum current requirement.

Online davekni

  • Executive Board Member
  • *******
  • Posts: 2826
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: More induction heating
« Reply #49 on: March 13, 2023, 12:21:01 AM »
Quote
Ok, since it will be difficult to me find a problem if it appears, I´ll stick with the exact components to get the best result. I don´t have 15V supply and you say 12V is not sure to be OK, but I have a lot 19V laptop power supply. Can I use it with a bigger resistor? wich resistance?
19V laptop supplies are convenient, and free when I collect them from recycling bins at work.  I use them for many projects.
Yes, I think 19V would be a fine choice for your ZVS gate supply.  100 ohm resistors will be just under 2W each.  One more detail:  At 19V and 100 ohms, power of 12V zener diodes in circuit will be about 0.42W.  Make sure zeners you use are rated for that with some margin, at least 0.5W rating.

Quote
Thank you, I think I´ll get banned from this forum for making this questions
Don't expect you will be banned, though you are correct that this forum is generally for users farther along in learning electronics.

I do hope someone else answers your previous request for beginner book recommendations.  Good luck with your project and with learning.
« Last Edit: March 13, 2023, 04:53:02 PM by davekni »
David Knierim

Offline petespaco

  • High Voltage Engineer
  • ****
  • Posts: 273
  • Karma: +12/-0
    • View Profile
    • French Creek Valley Activities
Re: More induction heating
« Reply #50 on: March 13, 2023, 06:15:51 AM »
Re: "book to learn electronics":
I too, learned electronics a long time ago, starting in about 1948.
If I were starting out today, I think I'd get one of those "learn electronics kits"

Here's one example:
https://www.sciplus.com/electronic-playground-48491-p?


Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 185
  • Karma: +1/-0
    • View Profile
Re: More induction heating
« Reply #51 on: March 13, 2023, 09:08:46 AM »
Thank to all of you!

I´ll use 3w 100ohm resistors to be safe (that is what I have) and the zener are 3w.

And this is why I´m making the triodes, for me that is the best way to learn.


Offline romy

  • High Voltage Enthusiast
  • *
  • Posts: 39
  • Karma: +0/-0
    • View Profile
Re: More induction heating
« Reply #52 on: March 14, 2023, 03:00:36 PM »
yes, learning electronics:

i made several attempts in my life. first was before internet. lacking a systematic education in the field i always got stuck pretty fast. last effort was one month ago, concentrating on power supplies and resonnant cirquits. i started with maxwells equations and prepared a list of symbols (two full pages). by the time i got acquainted with messrs. laplace, naba, poynting, shin et al, their complex conjugates and dyadic products i was done. now the little "j"-devil is haunting me at night.

zct, sct, zvt, ccm, llc, svt, zvs, svt, zcvt, lcc, zcs, elt, sp, dab, pol, pr, vfc, hhc, nr, vco:  abbreviations dont make it any easier.

there is a lot of material on youtube. today im trying to wrap my mind around this:

/>
« Last Edit: March 14, 2023, 04:42:00 PM by romy »

Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 185
  • Karma: +1/-0
    • View Profile
Re: More induction heating
« Reply #53 on: March 14, 2023, 10:28:05 PM »
yes, learning electronics:

i made several attempts in my life. first was before internet. lacking a systematic education in the field i always got stuck pretty fast. last effort was one month ago, concentrating on power supplies and resonnant cirquits. i started with maxwells equations and prepared a list of symbols (two full pages). by the time i got acquainted with messrs. laplace, naba, poynting, shin et al, their complex conjugates and dyadic products i was done. now the little "j"-devil is haunting me at night.

zct, sct, zvt, ccm, llc, svt, zvs, svt, zcvt, lcc, zcs, elt, sp, dab, pol, pr, vfc, hhc, nr, vco:  abbreviations dont make it any easier.

there is a lot of material on youtube. today im trying to wrap my mind around this:

/>

In my case is because I like, like learning english, I´m doing to travel and learn this things better, so in that case is easier

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 721
  • Karma: +22/-0
    • View Profile
Re: More induction heating
« Reply #54 on: March 14, 2023, 11:00:41 PM »
Not much of a riddle in that video by Professor S B-Y.   
In that last picture, as current increased from unsaturated to saturated,
the incremental L value went down but the stored energy still went up.
We can't figure stored energy from (I^2 * L/2).   
We can get it by integrating the input power during the whole inductor-charging ramp: I * E dt.
With optional refinement of subtracting the power loss due to wire resistance: I^2 R dt.

Kind of like figuring the energy to charge a MOSFET gate, when charge is not proportional to voltage.


Offline romy

  • High Voltage Enthusiast
  • *
  • Posts: 39
  • Karma: +0/-0
    • View Profile
Re: More induction heating
« Reply #55 on: March 15, 2023, 03:53:31 PM »
its his method of teaching. see subsequent vid.

Offline romy

  • High Voltage Enthusiast
  • *
  • Posts: 39
  • Karma: +0/-0
    • View Profile
Re: More induction heating
« Reply #56 on: March 15, 2023, 03:56:29 PM »
I suggest that you visit a website such as this one:
https://learnabout-electronics.org/PSU/psu12.php

Or:
https://www.physics.unlv.edu/~bill/PHYS483/power_supply_info.pdf
 or simply google:
"linear power supply design"   -since that appears to be what you want to use.

Thank you!

EDIT: I have read the links. They explain very well how works the filter capacitors in a power supply. I have a idea about that. My problem is that I don´t know how much ripple is admisible to power the heater. I mean, of course the bigger the capacity the better but I don´t know how much it would be a acceptable value

i have been told 3% ripple by the seller on the 1800w heater.

Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 185
  • Karma: +1/-0
    • View Profile
Re: More induction heating
« Reply #57 on: March 16, 2023, 12:17:32 AM »
Thank you for your answer.

Ok, it´s done





The 2 "loop" wires are conecting all the capacitors in parallel

A and B are the wires coming from the drains and fast diodes. My concern is, Does it matter in what point of the capacitor bank I connect A and B?
C goes to the 2 chokes and the induction coil

Thank you

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 721
  • Karma: +22/-0
    • View Profile
Re: More induction heating
« Reply #58 on: March 16, 2023, 01:30:31 AM »
>>Does it matter in what point of the capacitor bank I connect A and B?

Your connection of work coil to capacitor bank at point C is not ideal.
The closest capacitor will get largest share of current, and the 20th capacitor will get smallest share of current.  It really matters, if you compare inductance and high-frequency resistance of the 20-capacitor bus wire pair to inductance of the work coil.
The connection of driver, at A and B, is much less important because the current is much smaller.

There's a good diagram of this issue in instructable by imsmooth.   Or just scroll down on this page:
http://inductionheatertutorial.com/inductionheater/induction3.html

Can you build the 20-capacitor bank cordwood style (look it up) with two sheets of copper clad perf board?


Online davekni

  • Executive Board Member
  • *******
  • Posts: 2826
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: More induction heating
« Reply #59 on: March 16, 2023, 05:32:24 AM »
Quote
The connection of driver, at A and B, is much less important because the current is much smaller.
I agree that it is much less important.  However, I have experienced issues if wires to drains are too long.  Can end up oscillating at a much higher frequency than intended, one defined by drain capacitance and wire inductance.  Not likely an issue for you unless wires are longer than in the images shown.

Also agree that current between coil and capacitors needs to be better balanced.  Even just adding wires between the two banks at the coil end would help greatly.  Copper (heavy foil or sheet) for cap to coil connections is even better.
David Knierim

High Voltage Forum

Re: More induction heating
« Reply #59 on: March 16, 2023, 05:32:24 AM »

 


* Recent Topics and Posts

post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Jj
Today at 03:09:41 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
Today at 01:53:07 AM
post Re: UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:07:30 AM
post Re: UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
Today at 12:45:22 AM
post Re: UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 14, 2024, 10:41:03 PM
post UD+ debugging (randomly skipping pulses)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
June 14, 2024, 10:20:00 PM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 09:47:48 PM
post Fronius IG Plus 2LT-2 6kW Solar Inverter Teardown
[Electronic Circuits]
Mads Barnkob
June 14, 2024, 09:40:33 PM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 14, 2024, 07:44:12 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 05:21:55 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 14, 2024, 03:24:43 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 03:13:44 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 14, 2024, 02:27:06 AM
post Re: Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
davekni
June 14, 2024, 01:56:58 AM
post Are TVS diodes necessary for full bridge?
[Solid State Tesla Coils (SSTC)]
Simranjit
June 13, 2024, 11:21:46 PM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 13, 2024, 08:50:56 PM
post Re: Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
June 13, 2024, 07:43:37 PM
post Re: Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
petespaco
June 13, 2024, 04:52:08 PM
post Re: Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
June 13, 2024, 02:14:17 AM
post Re: Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 12, 2024, 11:04:57 PM
post Turning SSTC into DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
June 12, 2024, 10:23:08 PM
post Re: UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 12, 2024, 08:41:06 PM
post Re: UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 12, 2024, 07:53:31 PM
post Re: Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
haversin
June 12, 2024, 06:57:13 PM
post UD2.7C constantly in OCP despite having signal
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 12, 2024, 06:54:49 PM
post Re: Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
Mads Barnkob
June 12, 2024, 03:47:28 PM
post Van de Graaf Voltage measurement with voltage sensor and voltage divider
[Static Electricity]
vK
June 12, 2024, 03:42:18 AM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
davekni
June 12, 2024, 03:32:22 AM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 11, 2024, 11:05:49 PM
post Re: Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
June 11, 2024, 05:36:46 AM
post Re: Sling Psychrometer
[Laboratories, Equipment and Tools]
Twospoons
June 11, 2024, 12:29:31 AM
post Bigger sparks?...
[Vacuum Tube Tesla Coils (VTTC)]
Teslaventje
June 10, 2024, 11:05:55 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
June 10, 2024, 10:57:51 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 10, 2024, 08:08:04 PM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 10, 2024, 06:04:09 PM
post Sling Psychrometer
[Laboratories, Equipment and Tools]
klugesmith
June 10, 2024, 04:43:59 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 10, 2024, 03:35:28 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Jj
June 10, 2024, 01:36:41 PM
post Re: Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
Anders Mikkelsen
June 09, 2024, 05:44:29 PM
post Is a 60UF 800VDC Dawncap good for an induction heater?
[General Chat]
yourboi
June 09, 2024, 03:31:30 PM
post Re: Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
NyaaX_X
June 09, 2024, 01:34:49 PM
post Steve Ward's DRSSTC Interrupter stops working when adjusting pulse width
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
June 09, 2024, 01:56:51 AM
post Re: Return of Electronics Flea Market in "Silicon Valley"
[Sell / Buy / Trade]
klugesmith
June 08, 2024, 06:06:25 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
June 08, 2024, 05:38:14 AM
post Interrupter for SSTC
[Beginners]
Simranjit
June 08, 2024, 12:47:47 AM
post Re: Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
Michelle_
June 07, 2024, 03:59:57 PM
post Re: Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
davekni
June 07, 2024, 06:42:26 AM
post Re: Space-X Starship test this week
[Science, Research and News In Other Fields Than Electronics]
MRMILSTAR
June 07, 2024, 05:08:00 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
davekni
June 07, 2024, 03:16:31 AM
post Re: Space-X Starship test this week
[Science, Research and News In Other Fields Than Electronics]
klugesmith
June 06, 2024, 11:37:20 PM
post Adding capacitor to primary in SSTC
[Solid State Tesla Coils (SSTC)]
Simranjit
June 06, 2024, 11:20:23 PM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
June 06, 2024, 10:54:48 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 06, 2024, 05:17:02 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 06, 2024, 04:50:00 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
davekni
June 06, 2024, 04:00:52 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 06, 2024, 01:43:41 AM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 11:11:17 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Michelle_
June 05, 2024, 10:18:57 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 10:13:03 PM
post Re: Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
ZakW
June 05, 2024, 09:29:18 PM
post Half bridge sstc different waveform on two mosfets
[Solid State Tesla Coils (SSTC)]
Simranjit
June 05, 2024, 08:46:53 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Twospoons
June 05, 2024, 07:04:45 AM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Domo
June 05, 2024, 04:58:35 AM
post Re: Pearson current monitor model 1330 teardown (100kA)
[Laboratories, Equipment and Tools]
klugesmith
June 05, 2024, 01:42:04 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
June 04, 2024, 10:31:58 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
pete_dl
June 04, 2024, 08:08:28 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Twospoons
June 03, 2024, 11:13:26 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 03, 2024, 10:35:57 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 03, 2024, 05:51:05 PM
post Re: Want to build HV HF oscilloscope probe.
[Electronic Circuits]
Domo
June 03, 2024, 07:41:41 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 03, 2024, 05:28:44 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 03, 2024, 05:02:19 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 03, 2024, 03:47:33 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
June 03, 2024, 02:23:58 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
June 03, 2024, 01:25:24 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 03, 2024, 01:08:47 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 02, 2024, 10:29:02 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 02, 2024, 10:02:45 PM
post Re: Racing sparks
[Spark Gap Tesla Coils (SGTC)]
davekni
June 02, 2024, 08:25:37 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 02, 2024, 04:51:58 PM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Michelle_
June 02, 2024, 04:44:30 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
MRMILSTAR
June 02, 2024, 03:25:11 PM
post APC Smart-UPS 1500VA Teardown
[Electronic Circuits]
Mads Barnkob
June 02, 2024, 01:36:11 PM
post Re: My completed 14-stage Cockroft-Walton voltage multiplier
[Voltage Multipliers]
pete_dl
June 02, 2024, 11:43:40 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 02, 2024, 08:49:11 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
June 02, 2024, 08:36:07 AM
post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
June 02, 2024, 12:41:50 AM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Benjamin Lockhart
June 01, 2024, 08:24:35 PM
post Pearson current monitor model 1330 teardown (100kA)
[Laboratories, Equipment and Tools]
Mads Barnkob
June 01, 2024, 08:22:28 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
June 01, 2024, 03:56:53 AM
post Re: Racing sparks
[Spark Gap Tesla Coils (SGTC)]
Terry
June 01, 2024, 12:03:50 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
May 31, 2024, 11:46:20 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
Michelle_
May 31, 2024, 06:13:59 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 31, 2024, 01:55:22 AM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 30, 2024, 11:57:49 PM
post Re: First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
May 30, 2024, 11:50:06 PM
post First DRSSTC questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hi-Deff
May 30, 2024, 11:23:35 PM
post Re: Steve Ward SSTC5 build
[Solid State Tesla Coils (SSTC)]
davekni
May 30, 2024, 10:43:06 PM
post Re: Benjamin's DRSSTC3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 30, 2024, 10:24:35 PM
post Re: SSTC tripping circuit breaker
[Solid State Tesla Coils (SSTC)]
NyaaX_X
May 30, 2024, 06:10:04 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal