Author Topic: Aisler PCB Manufacturer  (Read 156 times)

Offline Max

  • High Voltage Technician
  • ***
  • Posts: 178
  • Karma: +17/-1
  • "With the first link, the chain is forged. [...]"
    • View Profile
    • My Youtube Channel
Aisler PCB Manufacturer
« on: June 09, 2021, 06:58:12 PM »
Hi everyone,

I got some PCBs today that I ordered from Aisler (Netherlands/EU). For small, double sided PCBs with no fancy things Aisler is comparable in cost with asian manufacturers. Anything else is easily double the cost or even more. And even if you're willing to pay, you get a lot less options.

For my PCB which doesn't require anything special the costs were:
JLCPCB: 25 PCBs for 5,24€ + 12,11€ FedEx = 17,34€ and about 10-15 days til delivery.
Aisler: 24 PCBs for 12,48€ + 9,51€ UPS = 21,99€ incl. VAT and 11 days til delivery.
For me, 5€ extra for having them manufactured on the same continent seemed like a good idea.

Effectively they took quite a bit longer than the 11 days. I ordered on 20.05.21, they started manufacturing on 25.05.21 (there were some holidays in between I think), shipped on 08.06.21 and arrived next day.

The PCBs themselves are mostly fine, but the outline needed some afterwork. There's a hair wide line of copper on some edges; apparently they mill the PCB a tiny bit too large. That copper needs to be removed; it's so thin that it easily becomes (or already is) loose and could cause shorts. In the attached photo I marked some of those in orange.
They also seem to not mill the outline past the starting point as you'd usually do with contour milling, leaving a bit of material on one edge (red circles).

The paneling was nothing I could select or deselect - all done by them.

All in all I'd order the PCBs again from them.


Kind regards,
Max

High Voltage Forum

Aisler PCB Manufacturer
« on: June 09, 2021, 06:58:12 PM »

 


* Recent Topics and Posts

post Re: Gate driver for big IGBTs
[Electronic Circuits]
TMaxElectronics
Today at 12:58:41 AM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 25, 2021, 10:15:30 PM
post CW Help -- too much info to digest
[Voltage Multipliers]
abstruse1
July 25, 2021, 06:16:53 PM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 25, 2021, 04:16:11 PM
post Re: Gate driver for big IGBTs
[Electronic Circuits]
davekni
July 25, 2021, 05:38:42 AM
post Gate driver for big IGBTs
[Electronic Circuits]
TMaxElectronics
July 25, 2021, 02:15:25 AM
post Re: Modified VTTC for induction heating
[Vacuum Tube Tesla Coils (VTTC)]
dbach
July 24, 2021, 11:38:33 PM
post Re: Modified VTTC for induction heating
[Vacuum Tube Tesla Coils (VTTC)]
Mads Barnkob
July 24, 2021, 11:29:15 PM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Twospoons
July 24, 2021, 10:41:38 PM
post Modified VTTC for induction heating
[Vacuum Tube Tesla Coils (VTTC)]
dbach
July 24, 2021, 09:18:42 PM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Mads Barnkob
July 24, 2021, 08:08:36 PM
post Re: Tesla Coil Show Controller Project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Max
July 24, 2021, 11:13:18 AM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Weston
July 24, 2021, 10:08:34 AM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 24, 2021, 03:20:42 AM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Twospoons
July 24, 2021, 03:16:27 AM
post 3kW Cisco Server Supply teardown and help needed
[Electronic Circuits]
Da_Stier
July 23, 2021, 09:23:11 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 23, 2021, 08:05:58 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
July 23, 2021, 07:02:18 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 23, 2021, 05:33:57 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 23, 2021, 04:51:37 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 23, 2021, 03:52:46 AM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 22, 2021, 10:59:32 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 22, 2021, 08:50:34 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 22, 2021, 08:47:23 PM
post Help needed - which IGBT module to buy
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 22, 2021, 07:01:24 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 22, 2021, 06:50:07 AM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 22, 2021, 06:39:37 AM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
July 21, 2021, 07:55:03 PM
post Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 21, 2021, 06:34:13 PM
post Re: Global shutter synchronized to arcs?
[DSLR]
Uspring
July 21, 2021, 05:10:18 PM
post Re: Tesla Coil Show Controller Project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 21, 2021, 12:42:29 PM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 21, 2021, 08:15:00 AM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 21, 2021, 04:57:04 AM
post Re: Micro-power continuity checker.
[Electronic Circuits]
davekni
July 21, 2021, 03:50:33 AM
post Re: Skm flyback destroyer 🤗
[Transformer (Ferrite Core)]
oneKone
July 21, 2021, 01:50:19 AM
post Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 20, 2021, 10:06:14 PM
post Re: Micro-power continuity checker.
[Electronic Circuits]
klugesmith
July 20, 2021, 06:24:29 PM
post Micro-power continuity checker.
[Electronic Circuits]
davekni
July 20, 2021, 05:37:36 AM
post Re: Help needed with SSTC. First TC build
[Solid State Tesla Coils (SSTC)]
davekni
July 20, 2021, 05:08:24 AM
post Re: Global shutter synchronized to arcs?
[DSLR]
davekni
July 20, 2021, 04:43:05 AM
post Re: Global shutter synchronized to arcs?
[DSLR]
TMaxElectronics
July 20, 2021, 12:09:36 AM
post Re: Help needed with SSTC. First TC build
[Solid State Tesla Coils (SSTC)]
AstRii
July 19, 2021, 11:13:13 PM
post Another question on CT Feedback
[Solid State Tesla Coils (SSTC)]
Maverikie
July 19, 2021, 08:56:04 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
newage
July 19, 2021, 07:09:56 PM
post Re: Global shutter synchronized to arcs?
[DSLR]
klugesmith
July 19, 2021, 06:49:08 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
klugesmith
July 19, 2021, 04:39:05 PM
post Global shutter synchronized to arcs?
[DSLR]
davekni
July 19, 2021, 06:32:35 AM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
July 19, 2021, 05:22:51 AM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
newage
July 19, 2021, 04:24:38 AM
post Re: a typical sstc half bridge design, any considerations or tips?
[Solid State Tesla Coils (SSTC)]
eli
July 19, 2021, 12:35:18 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal