Author Topic: My completed 14-stage Cockroft-Walton voltage multiplier  (Read 13416 times)

Offline 304er

  • High Voltage Experimenter
  • **
  • Posts: 56
  • Karma: +2/-0
  • "Always the hard way..."
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #20 on: November 25, 2021, 12:42:59 AM »
Hi Steve,

Nice little convenient mod. Great clean integration in to the multiplier. Just as I would expect from you 👍

Chris Reeland
Ladd Illinois USA
Chris Reeland
Ladd Illinois USA
Former Printer

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 571
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #21 on: November 25, 2021, 04:50:11 AM »
Thanks Chris!
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2859
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #22 on: November 25, 2021, 05:51:03 AM »
Quote
I was concerned that the intense electric field might damage the circuitry or affect its operation but everything seems fine. I still have the option of using the hard-wired remote switch.
Similarly, I was amazed that wireless microphones worked for Tesla coil and Marx generator demonstrations.  My friend brought one to our Maker Faire exhibit and we each used it for our respective presentations.  In our use, the receiver was farther from interference and the transmitter closer, so that likely helped.
David Knierim

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 571
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Ion motor powered by my completed 14-stage Cockroft-Walton voltage multiplier
« Reply #23 on: December 16, 2021, 10:22:08 PM »
I made a short video of an ion motor being powered by my voltage multiplier.  It took 3 attempts to make this video because I kept getting shocked by the intense electric field! I was successful on the third try because I moved back about 6 feet.

Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 571
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #24 on: January 25, 2023, 09:36:22 PM »
I added a new improvement to my voltage multiplier. It is a protection circuit that prevents damage caused by the accidental application of reverse-polarity power. If someone accidentally applies DC power from the external power supply with the incorrect polarity this circuit will not allow the current to flow. Without this my ZVS driver and RF receiver controller would be damaged.

You can do this with a diode but a regular silicon junction diode drops about 0.7 volts. With 10 amps of current this would be a 7 watt loss. In addition to wasting power, you would have to use a heat sink to cool the diode.

The next best method is to use a Schottky diode. These only drop about 0.5 volt. This is better but it still represents a loss of about 5 watts at 10 amps of current. I initially used this method.

The best method is to use 2 MOSFETs and some logic. This circuit is sometimes called an "ideal diode". This circuit drops less than 0.1 volts at 10 amps. This is a loss of less than 1 watt. This is what I currently use. It uses 2 MOSFETs and a LM74700-Q1 ideal diode controller chip. I could have built it myself but you can buy a complete circuit for less than $4 which is probably less than I would have spent if I bought the parts and made a circuit board.

I have attached a picture of the small circuit board as installed in my voltage multiplier. This protection circuit would be useful for any project that relies on an external DC power supply. This particular circuit can handle up to at least 30 volts and 15 amps.
« Last Edit: January 25, 2023, 11:43:55 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2859
  • Karma: +134/-2
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #25 on: January 26, 2023, 03:57:19 AM »
Quote
The best method is to use 2 MOSFETs and some logic. This circuit is sometimes called an "ideal diode".
Nice find!  Doesn't appear to be any particular need for 2 FETs.  Looks like they are just paralleled for higher current capability.

I also see two-terminal versions on EBay.  Would be interesting to analyze how they work, measure the reverse current needed to cause turn-off, etc.  Claim is 2us turn-off time, but that is likely with high current such as connecting a reversed supply input.
https://www.ebay.com/itm/325423537248
David Knierim

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 571
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #26 on: January 26, 2023, 04:55:24 AM »
The 2 MOSFETs are for greater current capacity. This one is rated for up to 15 amps. I didn't think the 2-terminal designs would have worked for my application. I also bought another 4-terminal one from E-Bay that only had the 2 MOSFETs but without the ideal diode controller IC. I measured its forward voltage drop and it was about 0.5 volts which wasn't any better than a Schottky diode. I didn't investigate why it performed so poorly. I just ditched it for the one with the controller IC which performed much better. The controller IC is a tiny 6-pin device and is hidden behind one of the blue wires in the picture.
« Last Edit: January 26, 2023, 05:02:18 AM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline IonWind

  • High Voltage Enthusiast
  • *
  • Posts: 25
  • Karma: +0/-0
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #27 on: March 02, 2023, 09:28:38 AM »
After 6 months of work I have finally finished my Cockroft-Walton voltage multiplier. It is a half-wave design with 14-stages. The specifications are: ...

Wow !!! Absolutely lovely to look at too :)
Gary.

I know a little about a lot and a lot about a little.

Offline Alberto

  • High Voltage Technician
  • ***
  • Posts: 186
  • Karma: +1/-0
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #28 on: March 24, 2024, 07:27:24 PM »
Amazing work!

Offline pete_dl

  • High Voltage Enthusiast
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #29 on: June 02, 2024, 11:43:40 AM »

* Each diode string consists of 3 fast-recovery (100 ns) diodes in series, with each diode being rated for 20 KV and 30 ma


Its an impressive multiplier Steve.

What was your reasoning for three 20KV diodes ? Was it to aim for a 100% safety factor ?

Also, the electric field strength around the wires connecting the caps and diodes could exceed the dielectric strength of the oil. Did you see any evidence of ionization of the oil ? I am not sure what that would look like :)

Peter.



Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 571
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #30 on: June 02, 2024, 03:25:11 PM »

* Each diode string consists of 3 fast-recovery (100 ns) diodes in series, with each diode being rated for 20 KV and 30 ma


Its an impressive multiplier Steve.

What was your reasoning for three 20KV diodes ? Was it to aim for a 100% safety factor ?

Also, the electric field strength around the wires connecting the caps and diodes could exceed the dielectric strength of the oil. Did you see any evidence of ionization of the oil ? I am not sure what that would look like :)

Peter.

Thanks. The peak input voltage from the flyback transformers is about 15 KV as I recall. I used 3 diodes in series just for a generous de-rating. I haven't seen any signs of ionization or breakdown in the oil. The multiplier has been completely reliable since I completed it.
« Last Edit: June 02, 2024, 03:27:45 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline pete_dl

  • High Voltage Enthusiast
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #31 on: June 04, 2024, 08:08:28 PM »
Thanks for your reply.

I am starting to test a 120kv voltage multiplier not unlike yours, with vertical acrylic tube filled with transformer oil. When switched on, I can see movement in the oil (slight shimmer and small bits of dust moving around).

What I suspect is happening is the field strength around the fine wires is above the dialetric strenth of the oil and the oil is obtaining a charge, then flowing to lower voltage components to drop the charge off. Not the end of the world, but an inefficiency that will reduce the output power.

I might switch to wax or epoxy. The disadvantage is no easy maintenance, but the ionized solid sections will stay in place and not drain the charge.

Peter.

High Voltage Forum

Re: My completed 14-stage Cockroft-Walton voltage multiplier
« Reply #31 on: June 04, 2024, 08:08:28 PM »

 


* Recent Topics and Posts

post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
Today at 10:17:36 PM
post Making a HV prove
[Electronic Circuits]
Alberto
Today at 09:01:08 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
Today at 01:33:37 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
Today at 12:17:32 AM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
davekni
July 11, 2024, 07:38:26 PM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
klugesmith
July 11, 2024, 06:30:00 PM
post LOD No Double Resonant SSTC?
[Solid State Tesla Coils (SSTC)]
ColinHeath
July 11, 2024, 06:08:30 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 11, 2024, 12:24:56 PM
post Re: Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 11, 2024, 06:42:23 AM
post Re: Syntherrupter Lightsaber Sender Programming
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 11, 2024, 05:46:07 AM
post Syntherrupter Lightsaber Sender Programming
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 11, 2024, 05:26:51 AM
post Re: Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 11, 2024, 02:50:54 AM
post Strange QCW Streamer Behavior
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coupling
July 11, 2024, 12:59:55 AM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
July 10, 2024, 07:10:34 PM
post Re: Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 10, 2024, 06:52:42 PM
post Re: Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 10, 2024, 06:28:19 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 10, 2024, 01:34:09 PM
post Re: Silicon(e) plasma
[General Chat]
alan sailer
July 10, 2024, 12:09:06 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
July 09, 2024, 11:52:00 PM
post Understanding and tracking upper and lower poles of QCW DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 09, 2024, 07:37:22 PM
post Re: Silicon(e) plasma
[General Chat]
MechatEng2023
July 09, 2024, 07:30:05 PM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 09, 2024, 03:30:49 AM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 09, 2024, 12:51:02 AM
post Re: UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 08, 2024, 11:30:44 PM
post Re: Why so cheap?
[General Chat]
alan sailer
July 08, 2024, 10:57:10 PM
post UD2.7C outputs very odd single square wave pulses
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 08, 2024, 10:21:01 PM
post Why so cheap?
[General Chat]
MRMILSTAR
July 08, 2024, 09:55:24 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 08, 2024, 09:18:21 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
July 08, 2024, 05:17:49 PM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Cameron Prince
July 08, 2024, 04:49:20 PM
post Re: Tesla coil in FEMM
[Beginners]
Simranjit
July 08, 2024, 04:28:43 AM
post Re: Tesla coil in FEMM
[Beginners]
davekni
July 08, 2024, 04:06:53 AM
post Tesla coil in FEMM
[Beginners]
Simranjit
July 08, 2024, 03:46:49 AM
post Re: Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 08, 2024, 02:42:00 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 08, 2024, 01:37:55 AM
post Re: First DRSSTC Build- Issues with Fibernet project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Sebigamer
July 08, 2024, 12:53:08 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 08, 2024, 12:49:48 AM
post Re: Silicon(e) plasma
[General Chat]
alan sailer
July 07, 2024, 11:15:35 PM
post Silicon(e) plasma
[General Chat]
MechatEng2023
July 07, 2024, 11:04:43 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 07, 2024, 09:39:07 PM
post Re: First DRSSTC Build- Issues with Fibernet project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 07, 2024, 05:32:56 PM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 07, 2024, 02:52:19 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 07, 2024, 02:50:04 PM
post Re: Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Anders Mikkelsen
July 07, 2024, 02:20:11 PM
post Teardown of a APC SmartUPS VT 40 kVA
[Electronic Circuits]
Mads Barnkob
July 07, 2024, 10:02:22 AM
post First DRSSTC Build- Issues with Fibernet project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Sebigamer
July 07, 2024, 09:23:58 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 07, 2024, 12:44:53 AM
post Re: FEMM tesla coil simulation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 07, 2024, 12:08:50 AM
post Re: FEMM tesla coil simulation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 06, 2024, 10:35:49 PM
post FEMM tesla coil simulation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 06, 2024, 09:42:43 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 06, 2024, 06:06:23 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 06, 2024, 10:21:16 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 06, 2024, 10:15:42 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 06, 2024, 04:53:56 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 06, 2024, 04:42:16 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 06, 2024, 04:09:50 AM
post Re: Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 06, 2024, 03:07:11 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 06, 2024, 03:05:18 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 06, 2024, 02:37:16 AM
post Re: QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 06, 2024, 02:20:14 AM
post QCWDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 06, 2024, 01:55:14 AM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 05, 2024, 11:50:37 PM
post Best core material for QCW Buck modulator ?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 05, 2024, 10:07:04 PM
post 230v Tesla coil and krypton gas
[Spark Gap Tesla Coils (SGTC)]
gravitysrainbow
July 05, 2024, 07:13:25 PM
post Re: No change in Phase Lead
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 05, 2024, 06:17:13 PM
post Re: Phase lead inductors
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
July 04, 2024, 11:40:45 PM
post Re: Sling Psychrometer
[Laboratories, Equipment and Tools]
Twospoons
July 04, 2024, 11:02:32 PM
post Phase lead inductors
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 04, 2024, 06:28:08 PM
post Re: Sling Psychrometer
[Laboratories, Equipment and Tools]
klugesmith
July 04, 2024, 12:31:40 AM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 04, 2024, 12:07:21 AM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 04, 2024, 12:06:17 AM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
July 03, 2024, 10:51:23 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 03, 2024, 09:44:14 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 03, 2024, 08:48:13 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 03, 2024, 08:24:50 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 03, 2024, 08:12:55 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 03, 2024, 07:29:53 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 03, 2024, 07:21:38 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 03, 2024, 05:05:39 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 03, 2024, 04:29:53 PM
post Re: FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 03, 2024, 04:09:11 PM
post FIRST DRSSTC SKM400GB128D OCD SETTING
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Alex_1996
July 03, 2024, 02:47:18 PM
post Re: Eliminating discharges from a SSTC
[Solid State Tesla Coils (SSTC)]
Alex_1996
July 03, 2024, 01:35:24 PM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
July 03, 2024, 02:19:03 AM
post Re: Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
verliebt_in_neukölln17
July 03, 2024, 01:19:50 AM
post Coax cable for DRSSTC interrupter?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Simranjit
July 02, 2024, 11:29:18 PM
post Re: Is this a good pulse experiment capacitor?
[Capacitor Banks]
Mads Barnkob
July 02, 2024, 09:59:07 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 02, 2024, 09:55:53 PM
post Re: Capacitor wiring for single phase 240 to split phase (180 degree) 240v
[Capacitor Banks]
klugesmith
July 02, 2024, 09:44:55 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 02, 2024, 07:51:37 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
July 02, 2024, 06:14:07 PM
post Is this a good pulse experiment capacitor?
[Capacitor Banks]
FPS
July 02, 2024, 06:02:38 PM
post Re: LabCoatz Staccato QCW No straight sparks
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Admiral Aaron Ravensdale
July 02, 2024, 11:37:46 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 02, 2024, 05:22:10 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
davekni
July 02, 2024, 05:16:30 AM
post Re: Building my first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
drobotk
July 01, 2024, 11:50:12 PM
post Re: Restoring a Rogowski coil calibrator
[Capacitor Banks]
klugesmith
July 01, 2024, 08:48:53 PM
post Uses for Weston's Little Bee probe
[Laboratories, Equipment and Tools]
klugesmith
July 01, 2024, 08:40:59 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
klugesmith
July 01, 2024, 08:09:42 AM
post Re: Coulometric hourmeters
[Laboratories, Equipment and Tools]
davekni
June 30, 2024, 06:49:45 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal