Author Topic: Budget USB cameras  (Read 1276 times)

Offline HiVi

  • High Voltage Enthusiast
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Budget USB cameras
« on: May 02, 2020, 06:50:58 PM »
Anyone has any experience with high speed industrial cameras?
I was looking a bit into it and found quite few cameras based on ON Semi PYTHON300/500 and Sony IMX 287 sensors.
Some data of sensors:
PYTHON300: 1/4", 640 x 480 pix, 815 fps
PYTHON500: 1/3.6", 800 x 600 pix, 545 fps
IMX 287: 1/29" 720 x 540 pix, 525 fps
All with global shutter, in price range of 400-500€, USB 3.0/1 conectivity, color or monochrome.
It looks like quite a budget solution for high speed video, if you dont need high resolution or above 1k fps.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1785
  • Karma: +46/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Budget USB cameras
« Reply #1 on: May 02, 2020, 09:29:31 PM »
As an owner of a FPS1000HD that can do 1000 FPS at 1280x720 and 4000 FPS at 640x480, I will say that to get any real useful slow motion recordings (things usually happen fast if you want to slow it down) even 1000 and 4000 FPS is not enough to get enough detail.

Resolution wise I would not go below HD (1280x720) if I ever upgrade or buy another high speed camera. It is simply not that useful for publishing stuff and professionally you can not justify to not just rent a phantom flex instead.

Those cameras listed are built to be used in high speed decision making automation, where you need to take 10 pictures of each object on a conveyor belt to pass/reject it on quality within miliseconds after passing. The software "looking" at these images are merely doing black/white comparisons according to filters or histograms, not exactly a picture quality for watching as a film. (I used to work on camera inspection systems in the brewery industry, top machines could do 10 pictures of each bottle at 50000 bottles/hour)

The only alternative to something like commercial flag ship models like the red phantom flex is Chronos 1.4 (actually built by a fellow amateur that used to frequent 4hv.org): https://www.krontech.ca/store/Chronos-1-4-high-speed-camera-p92268927

I can only advise you to NOT spend 500€ and save up 3000€ to a Chronos 1.4 instead :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline missoum0514

  • High Voltage Enthusiast
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Budget USB cameras
« Reply #2 on: August 03, 2020, 06:56:08 PM »
Good morning all
One person posted on youtube, what can be done with a camera (Python 300) and a good PC:
https://www.youtube.com/channel/UC0JmJc8DTPpES-m--Wwjj6A/videos?view=0&sort=dd&shelf_id=1

High Voltage Forum

Re: Budget USB cameras
« Reply #2 on: August 03, 2020, 06:56:08 PM »

 


* Recent Topics and Posts

post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 25, 2021, 10:15:30 PM
post CW Help -- too much info to digest
[Voltage Multipliers]
abstruse1
July 25, 2021, 06:16:53 PM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 25, 2021, 04:16:11 PM
post Re: Gate driver for big IGBTs
[Electronic Circuits]
davekni
July 25, 2021, 05:38:42 AM
post Gate driver for big IGBTs
[Electronic Circuits]
TMaxElectronics
July 25, 2021, 02:15:25 AM
post Re: Modified VTTC for induction heating
[Vacuum Tube Tesla Coils (VTTC)]
dbach
July 24, 2021, 11:38:33 PM
post Re: Modified VTTC for induction heating
[Vacuum Tube Tesla Coils (VTTC)]
Mads Barnkob
July 24, 2021, 11:29:15 PM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Twospoons
July 24, 2021, 10:41:38 PM
post Modified VTTC for induction heating
[Vacuum Tube Tesla Coils (VTTC)]
dbach
July 24, 2021, 09:18:42 PM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Mads Barnkob
July 24, 2021, 08:08:36 PM
post Re: Tesla Coil Show Controller Project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Max
July 24, 2021, 11:13:18 AM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Weston
July 24, 2021, 10:08:34 AM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 24, 2021, 03:20:42 AM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Twospoons
July 24, 2021, 03:16:27 AM
post 3kW Cisco Server Supply teardown and help needed
[Electronic Circuits]
Da_Stier
July 23, 2021, 09:23:11 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 23, 2021, 08:05:58 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
July 23, 2021, 07:02:18 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 23, 2021, 05:33:57 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 23, 2021, 04:51:37 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 23, 2021, 03:52:46 AM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 22, 2021, 10:59:32 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 22, 2021, 08:50:34 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 22, 2021, 08:47:23 PM
post Help needed - which IGBT module to buy
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 22, 2021, 07:01:24 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 22, 2021, 06:50:07 AM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 22, 2021, 06:39:37 AM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
July 21, 2021, 07:55:03 PM
post Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 21, 2021, 06:34:13 PM
post Re: Global shutter synchronized to arcs?
[DSLR]
Uspring
July 21, 2021, 05:10:18 PM
post Re: Tesla Coil Show Controller Project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 21, 2021, 12:42:29 PM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 21, 2021, 08:15:00 AM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 21, 2021, 04:57:04 AM
post Re: Micro-power continuity checker.
[Electronic Circuits]
davekni
July 21, 2021, 03:50:33 AM
post Re: Skm flyback destroyer 🤗
[Transformer (Ferrite Core)]
oneKone
July 21, 2021, 01:50:19 AM
post Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 20, 2021, 10:06:14 PM
post Re: Micro-power continuity checker.
[Electronic Circuits]
klugesmith
July 20, 2021, 06:24:29 PM
post Micro-power continuity checker.
[Electronic Circuits]
davekni
July 20, 2021, 05:37:36 AM
post Re: Help needed with SSTC. First TC build
[Solid State Tesla Coils (SSTC)]
davekni
July 20, 2021, 05:08:24 AM
post Re: Global shutter synchronized to arcs?
[DSLR]
davekni
July 20, 2021, 04:43:05 AM
post Re: Global shutter synchronized to arcs?
[DSLR]
TMaxElectronics
July 20, 2021, 12:09:36 AM
post Re: Help needed with SSTC. First TC build
[Solid State Tesla Coils (SSTC)]
AstRii
July 19, 2021, 11:13:13 PM
post Another question on CT Feedback
[Solid State Tesla Coils (SSTC)]
Maverikie
July 19, 2021, 08:56:04 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
newage
July 19, 2021, 07:09:56 PM
post Re: Global shutter synchronized to arcs?
[DSLR]
klugesmith
July 19, 2021, 06:49:08 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
klugesmith
July 19, 2021, 04:39:05 PM
post Global shutter synchronized to arcs?
[DSLR]
davekni
July 19, 2021, 06:32:35 AM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
July 19, 2021, 05:22:51 AM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
newage
July 19, 2021, 04:24:38 AM
post Re: a typical sstc half bridge design, any considerations or tips?
[Solid State Tesla Coils (SSTC)]
eli
July 19, 2021, 12:35:18 AM
post Re: a typical sstc half bridge design, any considerations or tips?
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
July 19, 2021, 12:15:43 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal