Help needed: HV Driver circuit

[HighVoltageRulezz]

Dear all-

sorry for my ignorance but I never had a proper electronics training.

My goal is to build a circuit being able to drive diffenet kinds of IGBT bridges through a GDT. The bridge then shall drive a series resonant HV Ferrite Transformer for a HV supply for vacuum experiments.

The attached is what I came up with (mosty inspired by Steve Ward). Should my circuit work?

Even bigger problem though- I want to make a one sided PCB in order to be able to mill it out with my cnc- but I am not able to get the autorouter up and working..

Any help would be great- werhaps when it is finished something that other members also could benefit from?

THANKS
Roman

[T3sl4co1l]

No -- emitter outputs need pull-down resistors, e.g. 1k.  Alternately, use TL598, which has totem pole outputs.

Tim

[HighVoltageRulezz]

Thank you so much!

So like this should be OK?

[T3sl4co1l]

Uhhh, heh, check where C10 and related connections are going.

Tim