Power in/transfer/out in an original Tesla coil

[VNTC]

This simulation image illustrates almost information of energy movement in a spark gape Tesla coil.
Image 1


The red region is energy charged into capacitor C1.
The orange region is energy discharge fromC1 to L1, it is a supper high surge power but it’s duration only 1us.It’s power is 1.15Mw peak but it’s energy is only
P=1/2 V*V*C1=1/2*5000*5000*80/1000000000=1joule
 In this case it run on 2nd harmonic frequency. I don’t know why software Orcad 17.2 lite run simulation like that.
In the no color fill region in the orange sine wave and purple sine wave. These halt cycles 1;3;5 are energy fromL1 going back to C1.These halt cycles 2;4 . .are energy fromC1 running to L1.
Image 2

Reactance power in L1red wave and Reactance power in L2purple wave.
Image 3

Reactance power in L2and dissipation power in the spark.
 In these waves the current and the voltage shifting  90degree,this is reactance power also called no energy power(ccosɸ =0) almost energy are saved and a tiny loss in dissipation and some in RF radiation. This action generate a strong electromagnetic field around the coils these thing is the agent for the transfer of energy through space or at least from primary to secondary coil. A super high power reciprocating movement back and forth bettwenL1;C1 and L2;C2.
The yellow region shows power dissipation in the spark released from the toroid.
Action charge into C1 and discharge fromC1 can say no loss energy. But by the transfer action maybe more energy loss so the yellow region seem smaller than orange region a lot.
This image also shows that these waves are complex by reason they are not the same phase.
One should emphasize that in this original Tesla coil the current in the primary and secondary coil shifting 90 degree approx. That is a difference between it and DRSSTC.