High Voltage Forum
General electronics => Computers, Microcontrollers, Programmable Logic, Interfaces and Displays => Topic started by: Physikfan on March 05, 2018, 12:16:56 PM
-
Under Windows 10, the HP Scanjet 6300c worked without problems.
After an automatic update to a new version of Windows 10, the scanner stopped working.
Despite much work, I could not use the scanner anymore.
Please, does anyone have any advice?
regards
Physikfan
-
I also noticed quite a lot of problems after windows 10 updates.Maybe try updating or reinstalling the scanners drivers.
-
I got a hint to undo the update from Windows 10 to the previous version from Windows 10.
I was lucky.
After restoring to the previous Windows version 10, the HP 6300C scanneris running again with the same program and driver as before the update.
-
The last official drivers for the HP ScanJet 6300c from HP are only for Windows XP:
ScanJet 6300c/cse/cxi/6350c/cse/cxi/6390c PrecisionScan Pro software/driver - SCSI and USB Windows XP 95.27M
ScanJet 6300C/6350C/6390C series PrecisionScan Pro driver update and button fix - USB and SCSI Windows XP 487.5k
-
I had some windows xp drivers installed under compatibility mode on.windows 7. Some drivers work, some don't.
-
Microsoft's solution is properly to upgrade your scanner ::)
I have a lot of different old serial/USB interface things that I can only use on a separate offline Windows XP machine, I have given up trying to get all these things to run on windows 10 / modern PC hardware platform.