[WTS] Yard Sale (IGBT's/Wires/Cooling/wire/induction/BusCaps/Coils/Magnetrons)

[dbach]

Moving Sale, selling all the components not yet in projects. FIRST COME FIRST SERVE (as defined by first payer not first message)

Photos below, ask for specific part numbers/ details.

would rather sell it all Intra-US flat rate but willing to go international if you're willing to pay for shipping fees.

Everything is as is, make offers I want it gone quickly and cheaply, expect: shipping cost + less than what you can find for a price on Ebay.

Other notes:
- would like to keep things together - induction heater caps with coil - igbts 2 or 4 at a time (Will give bulk discounts)
- The two full bridges were used for QCW coils, both have snubbers and dual GDT's for phase shift - one will come with a bus cap and mmc
- Coils were all hand-wound (with drill) then coated in epoxy or varnish, both small ones are 38 guage and used for QCW, fairly robust but cant remember resonant freq and dont have anything setup to test it. Expect small errors / imperfections


 (couldn't figure out how to attach all the photos so I turned them into a pdf doc) https://publuu.com/flip-book/656143/1462681

[Late]

Hello,
Do you still have any of the igbts left? If yes what bricks do you have and for how much are you willing to sell them?

[dbach]

I still have all bricks left. Willing to sell for 40$ a piece plus shipping. I have CM300's, 400's and some others that I can get the part number for if you're interested. Realizing the pdf doesn't work, attached photos.

Thanks,
Davis

[dbach]

Since the photos didnt load the first time, re-attached.






 [ Invalid Attachment ]

[Late]

some others that I can get the part number for if you're interested.

What's the part numbers of those white bricks you have? And if they are different how much do you have of each?

[dbach]

Part number is FF400R06KE3 (all bricks the same). They are 600V 500A.

[dbach]

Since there is no interest and I need most of this gone, will be giving away the magnetrons, coils, some of the capacitors, and most of the IGBT's away for free. First come first serve

[noahsarc]

Are the blue pulse caps 1200v .33uf? If so, they're like the ones I use and I'm needing about 20 more to finish my drsstc mmc.

[dbach]

I believe they are, ill make sure tonight

[Late]

I still have all bricks left. Willing to sell for 40$ a piece plus shipping. I have CM300's, 400's and some others that I can get the part number for if you're interested. Realizing the pdf doesn't work, attached photos.

Thanks,
Davis

Do you have any bricks that are 1200V rated? If yes I'd be interested in those.

[dbach]

The three cm400's are 1200v. the mystery brown bricks may be as well, they have no part number so I cannot say for sure.

[dbach]

They are likely one of these

[Late]

The three cm400's are 1200v. the mystery brown bricks may be as well, they have no part number so I cannot say for sure.

How many of the cm400's do you have? and how much are you willing to let them go for?