Proximity of primary and secondary

[thedoc298]

What space should I be using between primary and secondary of my drsstc. Found it, looking at all the other examples of drsstc, duh

[Mads Barnkob]

You need to supply much more information in a thread and preferable with pictures of the setup you are asking about.

I did touch this subject lightly, if you scroll down to "How to choose coupling coefficient between primary and secondary coils" in https://kaizerpowerelectronics.dk/tesla-coils/drsstc-design-guide/secondary-coil/

[thedoc298]

You need to supply much more information in a thread and preferable with pictures of the setup you are asking about.

I did touch this subject lightly, if you scroll down to "How to choose coupling coefficient between primary and secondary coils" in https://kaizerpowerelectronics.dk/tesla-coils/drsstc-design-guide/secondary-coil/

Actually found what I needed, was not  looking for coupling coefficient yet, just the distance between the primary and secondary so it don't arc over at whatever height I put it at. You have a load of info on your site must have taken long time to acquire. I will post some pictures after I wrap the primary. Thanks for the link.
 I sent a picture of the gap in question, as I have seen this gap all over the place and sometimes wrapped around the secondary of drsstc.