Author Topic: "LightningStorm" VTTC project  (Read 8141 times)

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
"LightningStorm" VTTC project
« on: August 23, 2018, 02:04:56 AM »
Hello all! This is my last VTTC project. This project started 3 years ago, and now finally assemble of generator unit case is started.
The objective of the project - to build a powerful vacuum tube Tesla coil on the basis of soviet metal-glass high-power air-cooled tetrode GU-39B-1. This tube is capable to dissipate at the plate power around 6kW. And its output power is 13kW.
It was made the plate and filament transformers. The filament transformer provides 6,6V and 100A. Plate transformer is wound on the base of the output transformer of the high power tube audio amplifier UPV-1,25 (russian УПВ-1,25) used two GU-81M tube in push-pull output stage. Its core is made up of steel plates of thickness 0.35 mm (core sectional area of 49cm^2). It provides voltage 5kV and 2A peak сurrent (nominally 1,5А)
In the power supply used level shifter with eight 1uF 16KV capacitors and homemade diode pack at 50kV and 3a. All ceramic capacitors in circuit - soviet K15U-1 or K15U-2 type.
The tube installed in a steel cylinder with polyamide insulator at the bottom. Centrifugal fan "bahcivan aorb" (BRDS 180-60, 1200 m³/h) is used to cool the tube. Tube operates in triode.
The secondary winding contains 800 turns of 1mm copper wire on 160x800mm PVC pipe. Epoxy coating. 20x5cm (now is 30x10cm) aluminium toroid is installed.
The primary is a 35 turns of 4mm copper wire on 250x500mm PVC pipe. Taps on each turn, starting with the 28th turn. Winding height is 28cm. MMC capacity is 2nF (4x470pf).
Feedback winding has 14 turns of 1.5mm copper wire (taps of the first 5 turns). Located above the primary winding. Grid leak circuit is 200 Ohm and 14nF.
Tesla Coil working in staccato mode. In the cathode circuit installed triac, which is controlled by circuit in 555 timers (based of the staccato cotroller of Steve Ward).
At this moment VTTC gives streamers up to 1.5m length. The length of the streamers is limited to the power of the plate transformer and power mains capability (mains 230V 50Hz, current consumption up to 80A).

/>
« Last Edit: August 23, 2018, 02:24:26 AM by Avenger »
All ingenious is simple

Offline TDAF

  • High Voltage Technician
  • ***
  • Posts: 108
  • Karma: +4/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #1 on: August 23, 2018, 02:32:31 AM »
 :o
EXQUISITE
kudos for the great construction
Love the Qcw comparable sparks

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 419
  • Karma: +15/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #2 on: August 23, 2018, 11:16:06 AM »
Looks amazing, and thanks for all the pictures!

:o
EXQUISITE
kudos for the great construction
Love the Qcw comparable sparks
I believe that Steve's QCW work came from wanting to replicate a VTTC type look (please correct me if I'm wrong here!)

Offline TDAF

  • High Voltage Technician
  • ***
  • Posts: 108
  • Karma: +4/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #3 on: August 23, 2018, 01:50:02 PM »
Ya you're completely correct :P :P

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #4 on: August 23, 2018, 01:57:13 PM »
The principle of the QCW and the VTTC is the same. Historically, the VTTC is the first QCW. In the tube coil, the width of the radio pulse is determined by the frequency of the AC mains and is 20ms (for 50hz). In the transistor coil, we can set the pulse width ourselves.
« Last Edit: August 23, 2018, 02:01:55 PM by Avenger »
All ingenious is simple

Offline Uspring

  • High Voltage Engineer
  • ****
  • Posts: 261
  • Karma: +20/-0
  • Physicist
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #5 on: August 23, 2018, 04:57:39 PM »
Powerful coil  :) . Did you also try to grow straight arcs utilising the mains waveform? Or is perhaps the frequency too low?


Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #6 on: August 23, 2018, 06:23:31 PM »
The form of the discharges in my case depends on the resonance frequency of the secondary. In my secondary it is 250kHz, which causes the discharge like SGTС or DRSSTC. Sword-like discharges need over 400khz (better 600 and over).
« Last Edit: August 23, 2018, 06:30:58 PM by Avenger »
All ingenious is simple

Offline Teravolt

  • High Voltage Technician
  • ***
  • Posts: 125
  • Karma: +2/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #7 on: August 23, 2018, 08:45:58 PM »
Hi avenger nice work thanks for mooving your thread, do you plan to make your secondary to a higher frequency and was it hard to tune? Does your primary and secondary have the same resonant frequency

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #8 on: August 24, 2018, 08:00:05 PM »
Quote
do you plan to make your secondary to a higher frequency and was it hard to tune? Does your primary and secondary have the same resonant frequency

No, I'm satisfied with the resonant frequency of the secondary and the shape of the discharges. The frequencies of the primary and secondary windings are of course the same.
New video:

All ingenious is simple

Online Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1876
  • Karma: +50/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: "LightningStorm" VTTC project
« Reply #9 on: August 25, 2018, 08:29:40 AM »
Wow that is an absolutely record breaking spark length for a VTTC, I think only Dr. Spark and RogerInOhio has been near those lengths for a VTTC.

Is the GU-39B tube really easy to drive since you can do with just 5 windings on the feedback coil, or is it because the power output is so great that you are well below the normal 15-20 turns?

How are the temperatures on the secondary/primary/feedback coils and the tube? I guess all the good study Russian capacitors are stone cold :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #10 on: August 25, 2018, 04:17:44 PM »
Quote
Wow that is an absolutely record breaking spark length for a VTTC, I think only Dr. Spark and RogerInOhio has been near those lengths for a VTTC.
Thank you! My coil will be one of the few, brought to the state of the finished product. Ahead of the manufacture of the power supply (it's also a control panel)
Quote
Is the GU-39B tube really easy to drive since you can do with just 5 windings on the feedback coil, or is it because the power output is so great that you are well below the normal 15-20 turns?
In the first post I wrote that the whole winding of 14 turns, taps from the last five. In fact, the entire winding is used, all 14 turns. The tube is quite difficult to drive, so the resistor in the gridleak is only 200 ohms.
Quote
How are the temperatures on the secondary/primary/feedback coils and the tube? I guess all the good study Russian capacitors are stone cold
Temperatures of most structural elements are small. Nothing is very hot. The temperature of the secondary and primary windings does not differ from the air temperature. Maybe a little warmer.
« Last Edit: August 25, 2018, 04:20:12 PM by Avenger »
All ingenious is simple

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 330
  • Karma: +10/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #11 on: August 28, 2018, 04:45:34 AM »
Welcome to the HVF @Avenger. Your build is simply awesome!

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #12 on: August 29, 2018, 09:25:51 PM »
Welcome to the HVF @Avenger. Your build is simply awesome!
Thank you!
And yes, more experiments with feedback coil

All ingenious is simple

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 372
  • Karma: +12/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #13 on: June 15, 2019, 05:38:30 PM »
Great coil. I wouldn't have the courage to operate it in my house as you appear to be. I settled for my single 833A VTTC which only puts out 20 inch streamers.  :)
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #14 on: June 24, 2019, 01:28:59 AM »
New primary cap (2200pf 30kv) is installed. Installed a ceramic (walkthroughs) insulators in to a front panel. The project is continues.



« Last Edit: June 24, 2019, 01:40:32 AM by Avenger »
All ingenious is simple

Online Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1876
  • Karma: +50/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: "LightningStorm" VTTC project
« Reply #15 on: June 25, 2019, 11:40:18 AM »
Looks very good, but how is the creepage distance on the inside of that feed-through? The outer part looks to be fairly long and will be fine for 30kV, this is your tank capacitor rating, but not likely your circulating tank voltage, however it does look like its much smaller distance from the copper band to the mounting screws on the inside.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #16 on: June 25, 2019, 03:18:07 PM »
The distance here does not matter. Insulators are located on a fiberglass plate. The distance between the copper conductors and the bolts is sufficient. Yes, I was wrong. 20kV capacitor voltage.



All ingenious is simple

Online Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1876
  • Karma: +50/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: "LightningStorm" VTTC project
« Reply #17 on: June 25, 2019, 08:51:37 PM »
You are right, with a fibreglass plate it does not matter at all, I just thought it was a painted metal sheet :)

So with your new tank capacitor, you are going to have 15% more capacitance, do you expect much different results or was it just a needed upgrade due to temperature problems?

Are the feed-throughs brass or is it really steel bolts as it looks like?
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Avenger

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #18 on: July 09, 2019, 07:31:37 PM »
The capacity of the tank capacitor is exactly the same as it was before.

Bolts in insulators is steel, I have not yet found brass bolts.
All ingenious is simple

Offline Bambinz

  • High Voltage Enthusiast
  • *
  • Posts: 46
  • Karma: +1/-1
    • View Profile
Re: "LightningStorm" VTTC project
« Reply #19 on: August 08, 2019, 01:15:11 PM »
1.5m of spark with an VTTC? It is Amazing!
The most powerfull VTTC that I have ever seen!

Congratulation!

High Voltage Forum

Re: "LightningStorm" VTTC project
« Reply #19 on: August 08, 2019, 01:15:11 PM »

 


* Recent Topics and Posts

post Mixing PID loops
[General Chat]
Patrick
Today at 07:28:01 AM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
Today at 04:13:06 AM
post Re: Self Starting Coil (Not)
[Solid State Tesla Coils (SSTC)]
davekni
Today at 03:34:15 AM
post Self Starting Coil (Not)
[Solid State Tesla Coils (SSTC)]
alan sailer
January 23, 2022, 10:45:46 PM
post Re: GDT Slow Rise/Fall times even with resistor shorted
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
January 23, 2022, 09:06:49 PM
post GDT Slow Rise/Fall times even with resistor shorted
[Dual Resonant Solid State Tesla coils (DRSSTC)]
SalinsLV
January 23, 2022, 07:18:56 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 23, 2022, 06:18:13 PM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 22, 2022, 11:20:55 AM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
ZakW
January 22, 2022, 07:07:09 AM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
johnf
January 22, 2022, 05:27:37 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
January 22, 2022, 04:27:38 AM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
January 22, 2022, 12:53:04 AM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 21, 2022, 07:36:07 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Uspring
January 21, 2022, 07:27:23 PM
post Re: Etching PCBs with a SLA 3d printer
[Printed Circuit Board]
TMaxElectronics
January 21, 2022, 02:05:52 PM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
ZakW
January 21, 2022, 09:08:18 AM
post Re: Muon Decay
[Detection, Counting and Measurements]
Da_Stier
January 21, 2022, 08:42:54 AM
post 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 21, 2022, 03:00:04 AM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 21, 2022, 02:16:57 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
January 20, 2022, 06:56:35 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Da_Stier
January 20, 2022, 05:19:26 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 20, 2022, 03:53:54 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Uspring
January 20, 2022, 01:20:19 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Da_Stier
January 20, 2022, 10:11:21 AM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 19, 2022, 08:22:49 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Mads Barnkob
January 19, 2022, 06:49:36 PM
post Re: Etching PCBs with a SLA 3d printer
[Printed Circuit Board]
hardboiled99
January 19, 2022, 07:37:27 AM
post Primary Coil Winding Technique
[Solid State Tesla Coils (SSTC)]
alan sailer
January 18, 2022, 10:34:48 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 18, 2022, 08:46:53 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Mads Barnkob
January 18, 2022, 08:08:53 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 18, 2022, 07:15:22 PM
post Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 18, 2022, 06:49:48 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 18, 2022, 08:47:53 AM
post Re: QO-100 / EShail 2 Uplink amplifier development adventures
[Radio Frequency]
Da_Stier
January 17, 2022, 09:13:32 PM
post Re: QO-100 / EShail 2 Uplink amplifier development adventures
[Radio Frequency]
Da_Stier
January 17, 2022, 09:05:56 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
January 17, 2022, 07:45:48 PM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 17, 2022, 07:41:34 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Mads Barnkob
January 17, 2022, 07:38:25 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
January 17, 2022, 07:31:03 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
January 17, 2022, 07:28:02 PM
post Re: Induction heater Driver for Flyback?
[Voltage Multipliers]
MRMILSTAR
January 16, 2022, 09:00:02 PM
post Induction heater Driver for Flyback?
[Voltage Multipliers]
abstruse1
January 16, 2022, 07:35:26 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Bambinz
January 16, 2022, 12:21:40 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
davekni
January 15, 2022, 07:10:03 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Bambinz
January 15, 2022, 06:31:33 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 14, 2022, 08:47:43 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
davekni
January 14, 2022, 08:39:07 PM
post Re: Unusual Youtube channel activity
[General Chat]
davekni
January 14, 2022, 08:14:17 PM
post Re: Unusual Youtube channel activity
[General Chat]
Mads Barnkob
January 14, 2022, 08:12:13 PM
post Unusual Youtube channel activity
[General Chat]
MRMILSTAR
January 14, 2022, 05:51:52 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 14, 2022, 08:51:57 AM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Bambinz
January 13, 2022, 08:20:02 PM
post Re: Help with SSTC feedback circuits with 4046 IC and Schmitt Triggers
[Solid State Tesla Coils (SSTC)]
davekni
January 13, 2022, 05:27:40 AM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
January 13, 2022, 03:10:32 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 12, 2022, 06:18:15 PM
post Re: Single mosfet bifiliar gdt
[Solid State Tesla Coils (SSTC)]
alan sailer
January 12, 2022, 05:45:26 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 12, 2022, 03:29:04 PM
post Re: Help with SSTC feedback circuits with 4046 IC and Schmitt Triggers
[Solid State Tesla Coils (SSTC)]
AFreshLad
January 12, 2022, 01:30:38 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 12, 2022, 09:09:13 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 11, 2022, 08:05:27 PM
post Re: Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Mads Barnkob
January 11, 2022, 07:42:12 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 11, 2022, 07:33:15 PM
post Re: 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
AstRii
January 11, 2022, 06:19:49 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 11, 2022, 05:19:46 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 11, 2022, 04:31:28 PM
post Re: 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
AstRii
January 11, 2022, 03:21:37 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
davekni
January 11, 2022, 06:50:49 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 11, 2022, 06:34:20 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
January 11, 2022, 06:24:13 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
davekni
January 11, 2022, 06:15:08 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 11, 2022, 05:25:31 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 11, 2022, 12:07:22 AM
post Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 10, 2022, 10:56:48 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 10, 2022, 09:38:53 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
ZakW
January 10, 2022, 07:50:13 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 10, 2022, 07:19:17 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
January 10, 2022, 03:13:08 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
davekni
January 10, 2022, 04:21:46 AM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 10, 2022, 03:59:09 AM
post Re: 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
davekni
January 10, 2022, 03:54:59 AM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 09, 2022, 11:45:09 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
January 09, 2022, 11:04:25 PM
post 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
AstRii
January 09, 2022, 04:22:11 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 09, 2022, 05:52:11 AM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
davekni
January 09, 2022, 05:10:50 AM
post Re: Performance issues regarding phase angle in SSTCs
[Solid State Tesla Coils (SSTC)]
davekni
January 09, 2022, 01:20:40 AM
post GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 09, 2022, 12:38:28 AM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
January 08, 2022, 06:36:28 PM
post Performance issues regarding phase angle in SSTCs
[Solid State Tesla Coils (SSTC)]
Max Seiringer
January 08, 2022, 03:21:31 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 08, 2022, 09:05:41 AM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
January 07, 2022, 10:20:10 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 07, 2022, 05:56:28 PM
post Re: First SSTC based on profdc9 PCB Pack
[Solid State Tesla Coils (SSTC)]
davekni
January 07, 2022, 05:15:38 AM
post Re: DRSSTC tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
January 07, 2022, 05:01:21 AM
post Re: How to prevent secondary to secondary to primary arcs?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
January 07, 2022, 04:59:59 AM
post Tophat QCW 1
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
January 07, 2022, 02:27:35 AM
post How to prevent secondary to secondary to primary arcs?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
January 07, 2022, 02:19:40 AM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 06, 2022, 09:33:06 PM
post Re: First SSTC based on profdc9 PCB Pack
[Solid State Tesla Coils (SSTC)]
alan sailer
January 06, 2022, 06:09:39 PM
post Re: DRSSTC tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
kubajed
January 06, 2022, 04:48:22 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal