Author Topic: MOSFET Protection in SSTC  (Read 750 times)

Offline Gisho

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
MOSFET Protection in SSTC
« on: May 12, 2021, 09:36:35 AM »
I came across this slayer exciter circuit that looks quite simple and so I decided to make this a high-quality build ;)
But I also want to run this for a long period of time which means that the circuit needs to be re-designed 
My main concerns are to,
1.Protect the mosfet
2.Run the circuit for a (very) long time
3.Possibly increase performance  ;D

I'm using an IRF530 fet and 2 x19V laptop chargers(LPS) in parallel.
Secondary coil is ~1000 turns of 0.1mm wire on a 3.1cm diameter pipe.
I'm desperate to give the best protection for the mosfet
« Last Edit: May 14, 2021, 11:14:04 AM by Gisho »

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1876
  • Karma: +50/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: MOSFET Protection in SSTC
« Reply #1 on: May 14, 2021, 09:48:27 AM »
This thread is on the verge of breaking rule #2: https://highvoltageforum.net/index.php?topic=31.0

1. MOSFET protection resonant/inductive circuits is well-documented in many places, use google.
2. Heat dissipation and management is well-documented in many places, use google.
3. Higher voltage / more turns on secondary.

I am looking forward to see your replies with suggested improvements you want to try, then we can talk about those. Afterall you did write "...which means that I need to re-design the circuit."
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Gisho

  • High Voltage Enthusiast
  • *
  • Posts: 9
  • Karma: +1/-0
    • View Profile
Re: MOSFET Protection in SSTC
« Reply #2 on: May 16, 2021, 07:34:48 AM »
I added an extra diode(1n4004)  between source-drain to reduce load on the internal diode. I also added a gate-source resistor and soldered the circuit together with a fairly big heatsink attached (I initially breadboarded it  :D:P) to reduce the stray inductance , but the fet is still finger-burning hot after a 2 min run.

Offline Power-Max

  • High Voltage Enthusiast
  • *
  • Posts: 16
  • Karma: +1/-0
    • View Profile
Re: MOSFET Protection in SSTC
« Reply #3 on: June 03, 2021, 04:52:20 AM »
I added an extra diode(1n4004)  between source-drain to reduce load on the internal diode. I also added a gate-source resistor and soldered the circuit together with a fairly big heatsink attached (I initially breadboarded it  :D:P) to reduce the stray inductance , but the fet is still finger-burning hot after a 2 min run.

1N4004 is a slow diode meant for mains rectification. Take a look at the specs, specifically junction capacitance and especially reverse recovery time. You want a diode that has a reverse recovery time measured in nanoseconds. The UF4007 comes to mind. small signal diodes (like 1n4148) come to mind for low currents and medium voltages, and schottky diodes come to mind for high currents and low to medium voltages.

Offline SalinsLV

  • High Voltage Enthusiast
  • *
  • Posts: 31
  • Karma: +2/-0
  • Electronics experience starting from 2015.
    • View Profile
Re: MOSFET Protection in SSTC
« Reply #4 on: June 04, 2021, 09:33:43 AM »
This circuit will result in a pile of dead mosfets if you're not careful(speaking from experience). You can try adding 1.5ke15ca at the gate and 1.5ke400ca at the source/drain. This slayer exciter is great for quick sparks but it can be hard to get longer sparks. The longest i've achieved were 40cm long.
K. Salins

High Voltage Forum

Re: MOSFET Protection in SSTC
« Reply #4 on: June 04, 2021, 09:33:43 AM »

 


* Recent Topics and Posts

post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
Today at 04:13:06 AM
post Re: Self Starting Coil (Not)
[Solid State Tesla Coils (SSTC)]
davekni
Today at 03:34:15 AM
post Self Starting Coil (Not)
[Solid State Tesla Coils (SSTC)]
alan sailer
January 23, 2022, 10:45:46 PM
post Re: GDT Slow Rise/Fall times even with resistor shorted
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
January 23, 2022, 09:06:49 PM
post GDT Slow Rise/Fall times even with resistor shorted
[Dual Resonant Solid State Tesla coils (DRSSTC)]
SalinsLV
January 23, 2022, 07:18:56 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 23, 2022, 06:18:13 PM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 22, 2022, 11:20:55 AM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
ZakW
January 22, 2022, 07:07:09 AM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
johnf
January 22, 2022, 05:27:37 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
January 22, 2022, 04:27:38 AM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
January 22, 2022, 12:53:04 AM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 21, 2022, 07:36:07 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Uspring
January 21, 2022, 07:27:23 PM
post Re: Etching PCBs with a SLA 3d printer
[Printed Circuit Board]
TMaxElectronics
January 21, 2022, 02:05:52 PM
post Re: 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
ZakW
January 21, 2022, 09:08:18 AM
post Re: Muon Decay
[Detection, Counting and Measurements]
Da_Stier
January 21, 2022, 08:42:54 AM
post 120VAC Mains Ramped Builds
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 21, 2022, 03:00:04 AM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 21, 2022, 02:16:57 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
January 20, 2022, 06:56:35 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Da_Stier
January 20, 2022, 05:19:26 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 20, 2022, 03:53:54 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Uspring
January 20, 2022, 01:20:19 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Da_Stier
January 20, 2022, 10:11:21 AM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 19, 2022, 08:22:49 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Mads Barnkob
January 19, 2022, 06:49:36 PM
post Re: Etching PCBs with a SLA 3d printer
[Printed Circuit Board]
hardboiled99
January 19, 2022, 07:37:27 AM
post Primary Coil Winding Technique
[Solid State Tesla Coils (SSTC)]
alan sailer
January 18, 2022, 10:34:48 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 18, 2022, 08:46:53 PM
post Re: Muon Decay
[Detection, Counting and Measurements]
Mads Barnkob
January 18, 2022, 08:08:53 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 18, 2022, 07:15:22 PM
post Muon Decay
[Detection, Counting and Measurements]
alan sailer
January 18, 2022, 06:49:48 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 18, 2022, 08:47:53 AM
post Re: QO-100 / EShail 2 Uplink amplifier development adventures
[Radio Frequency]
Da_Stier
January 17, 2022, 09:13:32 PM
post Re: QO-100 / EShail 2 Uplink amplifier development adventures
[Radio Frequency]
Da_Stier
January 17, 2022, 09:05:56 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
January 17, 2022, 07:45:48 PM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 17, 2022, 07:41:34 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Mads Barnkob
January 17, 2022, 07:38:25 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
January 17, 2022, 07:31:03 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
January 17, 2022, 07:28:02 PM
post Re: Induction heater Driver for Flyback?
[Voltage Multipliers]
MRMILSTAR
January 16, 2022, 09:00:02 PM
post Induction heater Driver for Flyback?
[Voltage Multipliers]
abstruse1
January 16, 2022, 07:35:26 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Bambinz
January 16, 2022, 12:21:40 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
davekni
January 15, 2022, 07:10:03 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Bambinz
January 15, 2022, 06:31:33 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Magneticitist
January 14, 2022, 08:47:43 PM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
davekni
January 14, 2022, 08:39:07 PM
post Re: Unusual Youtube channel activity
[General Chat]
davekni
January 14, 2022, 08:14:17 PM
post Re: Unusual Youtube channel activity
[General Chat]
Mads Barnkob
January 14, 2022, 08:12:13 PM
post Unusual Youtube channel activity
[General Chat]
MRMILSTAR
January 14, 2022, 05:51:52 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 14, 2022, 08:51:57 AM
post Re: SSTC with push-pull configuration
[Solid State Tesla Coils (SSTC)]
Bambinz
January 13, 2022, 08:20:02 PM
post Re: Help with SSTC feedback circuits with 4046 IC and Schmitt Triggers
[Solid State Tesla Coils (SSTC)]
davekni
January 13, 2022, 05:27:40 AM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
January 13, 2022, 03:10:32 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 12, 2022, 06:18:15 PM
post Re: Single mosfet bifiliar gdt
[Solid State Tesla Coils (SSTC)]
alan sailer
January 12, 2022, 05:45:26 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 12, 2022, 03:29:04 PM
post Re: Help with SSTC feedback circuits with 4046 IC and Schmitt Triggers
[Solid State Tesla Coils (SSTC)]
AFreshLad
January 12, 2022, 01:30:38 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 12, 2022, 09:09:13 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 11, 2022, 08:05:27 PM
post Re: Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Mads Barnkob
January 11, 2022, 07:42:12 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 11, 2022, 07:33:15 PM
post Re: 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
AstRii
January 11, 2022, 06:19:49 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 11, 2022, 05:19:46 PM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 11, 2022, 04:31:28 PM
post Re: 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
AstRii
January 11, 2022, 03:21:37 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
davekni
January 11, 2022, 06:50:49 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 11, 2022, 06:34:20 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
January 11, 2022, 06:24:13 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
davekni
January 11, 2022, 06:15:08 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 11, 2022, 05:25:31 AM
post Re: Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 11, 2022, 12:07:22 AM
post Strange reading for grid feedback coil voltage
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
January 10, 2022, 10:56:48 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 10, 2022, 09:38:53 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
ZakW
January 10, 2022, 07:50:13 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 10, 2022, 07:19:17 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
January 10, 2022, 03:13:08 PM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
davekni
January 10, 2022, 04:21:46 AM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 10, 2022, 03:59:09 AM
post Re: 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
davekni
January 10, 2022, 03:54:59 AM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 09, 2022, 11:45:09 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
January 09, 2022, 11:04:25 PM
post 8x MOT transformer, weird power draw
[Transformer (Iron Core)]
AstRii
January 09, 2022, 04:22:11 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
Duane B
January 09, 2022, 05:52:11 AM
post Re: GDT Testing
[Solid State Tesla Coils (SSTC)]
davekni
January 09, 2022, 05:10:50 AM
post Re: Performance issues regarding phase angle in SSTCs
[Solid State Tesla Coils (SSTC)]
davekni
January 09, 2022, 01:20:40 AM
post GDT Testing
[Solid State Tesla Coils (SSTC)]
ZakW
January 09, 2022, 12:38:28 AM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
January 08, 2022, 06:36:28 PM
post Performance issues regarding phase angle in SSTCs
[Solid State Tesla Coils (SSTC)]
Max Seiringer
January 08, 2022, 03:21:31 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 08, 2022, 09:05:41 AM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
January 07, 2022, 10:20:10 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
January 07, 2022, 05:56:28 PM
post Re: First SSTC based on profdc9 PCB Pack
[Solid State Tesla Coils (SSTC)]
davekni
January 07, 2022, 05:15:38 AM
post Re: DRSSTC tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
January 07, 2022, 05:01:21 AM
post Re: How to prevent secondary to secondary to primary arcs?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
January 07, 2022, 04:59:59 AM
post Tophat QCW 1
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
January 07, 2022, 02:27:35 AM
post How to prevent secondary to secondary to primary arcs?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
dbach
January 07, 2022, 02:19:40 AM
post Re: General Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
January 06, 2022, 09:33:06 PM
post Re: First SSTC based on profdc9 PCB Pack
[Solid State Tesla Coils (SSTC)]
alan sailer
January 06, 2022, 06:09:39 PM
post Re: DRSSTC tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
kubajed
January 06, 2022, 04:48:22 PM
post Re: First SSTC based on profdc9 PCB Pack
[Solid State Tesla Coils (SSTC)]
SK1701
January 06, 2022, 03:05:55 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal