New UD2.9 smd DRSSTC drivers

[Late]

Hello again,
I recently finished making a DRSSTC driver board. I based my design on the UD2.9 driver made by profdc9 but i made it SMD and added some improvements. The driver was made the same size as the popular UD2.7C driver board.

These are the improvements i made to it:
1. Replaced outdated parts
2. Did some cost saving
3. Added 12V buck regulator
4. Improved the layout
5. Added possibility to easily make the driver self-oscillating

While the driver is SMD and the board is quite dense it is still possible to assemble it by hand and mostly contains 0603 and 0805 parts.
I have not yet tested this driver but i will soon order the boards and parts and will be testing them as soon as the parts and pcbs arrive.

Here are some pictures of the driver and bellow i have added the schematic






If yall have any suggestions of what else i should improve post them down bellow.

And also would anyone be interested to buy these drivers if i was selling them assembled?

[Late]

After seeing that many ppl have been interested in the files for this driver i noticed that i hadnt added full set of files here so here they are now. Link to the git repo with files. https://github.com/Patriks0912/UD2.9C-SMD-driver

[TXtesla]

I appreciate you notifying me and will get back after reviewing the BOM.

[Mads Barnkob]

Did you get it tested well enough to add it to the sticky thread with DRSSTC information?

[Late]

Did you get it tested well enough to add it to the sticky thread with DRSSTC information?

Currently ive only bench tested it but it seems to work well. Next monday i plan to do more thorough bench tests and then hopefully will put it in my DRSSTC i