Author Topic: Looking for a good schematic to follow for my first audio sstc coil :3  (Read 534 times)

Offline ItsChloeUwU

  • High Voltage Enthusiast
  • *
  • Posts: 33
  • Karma: +2/-1
  • Love You All 💗✌🏻🏳️‍🌈
    • View Profile
    • My Site UwU
Hi,
i was designing my drsstc, and with the help of the forum i got pretty much the 3d project done and i was ready to start doing the bridge but then i realized that i knowed just a little and instead of starting with full on bricks ::) i would have liked to start with something smaller in a TO-247 format  ;D.

So here i am asking for a good yet affordable schematic to make an sstc with good henaf spark lenght and that is audiomodulated, preferibly high quality (with midi and cheap optic cable perhaps?).

Im a bit on a budget so i cant really spend all my moneys on this project but i would also like to have around 30 to 50cm of sparks if is possible..
i was following a youtube channel that really had some nice resolts! im gonna leve the link at the end of this post so that you can have an idea of what i would like to have as a spark lenght.
i was planning to use some 60n65 since they are pretty easy and common to diagnosticate if it fails..

please leave me some good schematics that i can follow/edit to my needs (i would need help for that tho).

this is the yt vid (around 20secs in):

Offline AstRii

  • High Voltage Technician
  • ***
  • Posts: 181
  • Karma: +6/-0
  • Czech Technical University in Prague
    • View Profile
    • UHVlab - Tesla Coils | High Voltage | Education
I highly recommend using CD4046 to drive an SSTC, it's quite reliable, easy to modulate with analog audio and in case of feedback error it won't destroy your transistors.

I have built such coil with schematics https://www.uhvlab.org/sstc-ii



My coil is just slightly modified version of https://www.vn-experimenty.eu/teslov-transformator/sstc/sstc-5.html (not available in english)
Marek Novotny
Czech Republic, Czech Technical University in Prague
www.uhvlab.org

Offline ItsChloeUwU

  • High Voltage Enthusiast
  • *
  • Posts: 33
  • Karma: +2/-1
  • Love You All 💗✌🏻🏳️‍🌈
    • View Profile
    • My Site UwU
I highly recommend using CD4046 to drive an SSTC, it's quite reliable, easy to modulate with analog audio and in case of feedback error it won't destroy your transistors.

I have built such coil with schematics https://www.uhvlab.org/sstc-ii

My coil is just slightly modified version of https://www.vn-experimenty.eu/teslov-transformator/sstc/sstc-5.html (not available in english)

well yeah... this looks good.. but i was looking for something less "noisy" with the audio and a bit longer sparks with audio... so something a bit more.. midi style lets say.. also i looked into the schematics and buildings.. it not THAT easy haha a lot of transistors etc... im looking for something simpler with the driver too.. i mean.. i have a ud2.7C driver so maybe i could use that.. but i need to check if its in good shape...
if its not i need something more simple to do...

this said.. i would like to ask for something with less transistors.. easyer driver.. and more clear sparks with audio modulation :3
« Last Edit: July 26, 2022, 04:15:22 PM by ItsChloeUwU »

Offline ItsChloeUwU

  • High Voltage Enthusiast
  • *
  • Posts: 33
  • Karma: +2/-1
  • Love You All 💗✌🏻🏳️‍🌈
    • View Profile
    • My Site UwU

Offline AstRii

  • High Voltage Technician
  • ***
  • Posts: 181
  • Karma: +6/-0
  • Czech Technical University in Prague
    • View Profile
    • UHVlab - Tesla Coils | High Voltage | Education
UD2.7 can drive an SSTC but DRSSTCs usually run very short duty cycles, for continuous or long duty cycles, adding a little more DC capacitance to the driver board might be a good idea. Also those small SMD packages with Gate drivers might overheat.

Before creating my first SSTC, I wanted the exact same thing as you; a simple, easy to build driver but those drivers are usually unreliable in one way or another. I ended up building 4 different drivers until I finally decided to build PLL CD4046 driver which finally solved everything. This driver can also be easily modified for using MIDI instead of mp3 audio. For example using ENABLE pin of Gate drivers.

But in case you don't want to get your hands on phase lock loop I suggest you try following driver:

From https://www.vn-experimenty.eu/teslov-transformator/sstc/sstc-4.html

It uses 74HC14 in combination with capacitor and resistor to create a simple oscillator which drives the coil before an antenna/CT feedback is up and running.

Also, there is no need to use so many transistors as I have used in my coil. My coil was drawing over 3kW of power, in case you're aiming for lower input power you may build a single full bridge or even a half bridge.
« Last Edit: July 26, 2022, 04:28:20 PM by AstRii »
Marek Novotny
Czech Republic, Czech Technical University in Prague
www.uhvlab.org

Offline ZakW

  • High Voltage Enthusiast
  • *
  • Posts: 47
  • Karma: +2/-0
    • View Profile
Hello,

This topic has been discussed a lot before and there are a lot of great starter SSTCs out there (also forum rule #2...). Have you tried looking for similar questions on the forum? Which circuits have you considered building?

Here are a few great links that have several builds and varying levels of power and complexity. Most of them can be modified slightly to add audio modulation.

https://kaizerpowerelectronics.dk/
https://www.stevehv.4hv.org/SSTCindex.htm
https://www.loneoceans.com/labs/#

-Zak

Offline ItsChloeUwU

  • High Voltage Enthusiast
  • *
  • Posts: 33
  • Karma: +2/-1
  • Love You All 💗✌🏻🏳️‍🌈
    • View Profile
    • My Site UwU
Hello,

This topic has been discussed a lot before and there are a lot of great starter SSTCs out there (also forum rule #2...). Have you tried looking for similar questions on the forum? Which circuits have you considered building?

Here are a few great links that have several builds and varying levels of power and complexity. Most of them can be modified slightly to add audio modulation.

https://kaizerpowerelectronics.dk/
https://www.stevehv.4hv.org/SSTCindex.htm
https://www.loneoceans.com/labs/#

-Zak

Hi Zak,
yes im aware of role 2 but tbh i could not find any good MIDI interrupted sstc and with great sparks like the Fabricio one... so yeah... :c

Offline ItsChloeUwU

  • High Voltage Enthusiast
  • *
  • Posts: 33
  • Karma: +2/-1
  • Love You All 💗✌🏻🏳️‍🌈
    • View Profile
    • My Site UwU
UD2.7 can drive an SSTC but DRSSTCs usually run very short duty cycles, for continuous or long duty cycles, adding a little more DC capacitance to the driver board might be a good idea. Also those small SMD packages with Gate drivers might overheat.

Before creating my first SSTC, I wanted the exact same thing as you; a simple, easy to build driver but those drivers are usually unreliable in one way or another. I ended up building 4 different drivers until I finally decided to build PLL CD4046 driver which finally solved everything. This driver can also be easily modified for using MIDI instead of mp3 audio. For example using ENABLE pin of Gate drivers.

But in case you don't want to get your hands on phase lock loop I suggest you try following driver:
From https://www.vn-experimenty.eu/teslov-transformator/sstc/sstc-4.html

It uses 74HC14 in combination with capacitor and resistor to create a simple oscillator which drives the coil before an antenna/CT feedback is up and running.

Also, there is no need to use so many transistors as I have used in my coil. My coil was drawing over 3kW of power, in case you're aiming for lower input power you may build a single full bridge or even a half bridge.

Seeing the Fabricio one (the video above) his coil is easy and small packaged wich is another thing im trying to aim for... so yeah... idk... i guess a drsstc then? :c

Offline ItsChloeUwU

  • High Voltage Enthusiast
  • *
  • Posts: 33
  • Karma: +2/-1
  • Love You All 💗✌🏻🏳️‍🌈
    • View Profile
    • My Site UwU
UD2.7 can drive an SSTC but DRSSTCs usually run very short duty cycles, for continuous or long duty cycles, adding a little more DC capacitance to the driver board might be a good idea. Also those small SMD packages with Gate drivers might overheat.

Before creating my first SSTC, I wanted the exact same thing as you; a simple, easy to build driver but those drivers are usually unreliable in one way or another. I ended up building 4 different drivers until I finally decided to build PLL CD4046 driver which finally solved everything. This driver can also be easily modified for using MIDI instead of mp3 audio. For example using ENABLE pin of Gate drivers.

But in case you don't want to get your hands on phase lock loop I suggest you try following driver:
From https://www.vn-experimenty.eu/teslov-transformator/sstc/sstc-4.html

It uses 74HC14 in combination with capacitor and resistor to create a simple oscillator which drives the coil before an antenna/CT feedback is up and running.

Also, there is no need to use so many transistors as I have used in my coil. My coil was drawing over 3kW of power, in case you're aiming for lower input power you may build a single full bridge or even a half bridge.

Seeing the Fabricio one (the video above) his coil is easy and small packaged wich is another thing im trying to aim for... so yeah... idk... i guess a drsstc then? :c

Offline AstRii

  • High Voltage Technician
  • ***
  • Posts: 181
  • Karma: +6/-0
  • Czech Technical University in Prague
    • View Profile
    • UHVlab - Tesla Coils | High Voltage | Education
DRSSTC adds a bit of complexity as you need to design an MMC (which can be costly) and there is much higher chance of over-coupling creating racing sparks.
DRSSTC offers much higher efficiency due to zero current switching, that's why DR coils are usually quite "small packaged", there is no need for big heatsinks. However SSTC can be compact as well, it's all about layout design.
If you're aiming for smaller design, you just have to accept you'll be switching lower power.

Pretty much any SSTC driver is able (or can be modified) to play MIDI. But being able to play MIDI is not just a matter of having a coil, you also need a good interrupter and MIDI files which sounds good on the coil. Not every MIDI file can be played on a Tesla coil.
Franzoli is well known for creating his own MIDI files with special features which allows him to play great sounding MIDI on his coils.

Marek Novotny
Czech Republic, Czech Technical University in Prague
www.uhvlab.org

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1989
  • Karma: +52/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Franzoli is well known for creating his own MIDI files with special features which allows him to play great sounding MIDI on his coils.

AFAIK he is not even using MIDI files.

He prepares stereo audio files in Fruity Loop and uses each positive and negative side of a audio stereo signal as a channel, so he has 4 channels/coils in a stereo signal. So all his signal processing is done in Fruity Loops.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline ItsChloeUwU

  • High Voltage Enthusiast
  • *
  • Posts: 33
  • Karma: +2/-1
  • Love You All 💗✌🏻🏳️‍🌈
    • View Profile
    • My Site UwU
Franzoli is well known for creating his own MIDI files with special features which allows him to play great sounding MIDI on his coils.

AFAIK he is not even using MIDI files.

He prepares stereo audio files in Fruity Loop and uses each positive and negative side of a audio stereo signal as a channel, so he has 4 channels/coils in a stereo signal. So all his signal processing is done in Fruity Loops.

hewwo Mads!
nice to have you in my comments!

I knowed franzoli since i was really young, and yeah.. i knowed about that... but dang it sound complicated haha.. i mean.. i used FL Studio before.. and its oky.. but the composition to make it sound so good i never understood how he did that hahahaha... perhaps any suggestions? also would like to know if you have any good coil to suggest to me! a nice sstc that is not SUPER complicated that plays midi with nice lenght of sparks.. otherwise i sould go back to my drsstc but im a bit scared to start with a full on brick dr LoL

High Voltage Forum


 


* Recent Topics and Posts

post Re: Aluminium Nitride Thermal Pads
[General Chat]
Weston
Today at 08:33:16 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mike
Today at 04:20:00 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 02:25:07 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
Today at 02:18:56 AM
post Re: Problem with VTTC Staccato interrupter PLZ HELP
[Vacuum Tube Tesla Coils (VTTC)]
davekni
Today at 01:57:37 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 01:54:04 AM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
Today at 12:09:56 AM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 13, 2022, 10:14:40 PM
post Problem with VTTC Staccato interrupter PLZ HELP
[Vacuum Tube Tesla Coils (VTTC)]
NerdlabsMadScience
August 13, 2022, 09:32:08 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 13, 2022, 09:11:03 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 13, 2022, 08:45:41 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 13, 2022, 08:20:01 PM
post Re: Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 13, 2022, 08:00:14 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 13, 2022, 07:41:45 PM
post A little idea I had for my dual full bridge design
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Overlordcheese
August 13, 2022, 06:42:34 PM
post Feedback problems
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
August 13, 2022, 06:17:43 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 13, 2022, 03:18:05 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 12, 2022, 11:03:52 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 12, 2022, 10:53:44 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 12, 2022, 10:13:02 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 12, 2022, 09:35:29 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
klugesmith
August 12, 2022, 08:28:28 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
davekni
August 12, 2022, 07:26:41 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
alan sailer
August 12, 2022, 06:52:58 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
klugesmith
August 12, 2022, 06:39:27 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 12, 2022, 06:38:44 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
klugesmith
August 12, 2022, 05:57:00 PM
post Re: Aluminium Nitride Thermal Pads
[General Chat]
klugesmith
August 12, 2022, 12:44:20 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 12, 2022, 08:36:23 AM
post Aluminium Nitride Thermal Pads
[General Chat]
Weston
August 12, 2022, 04:31:17 AM
post Re: Helpy Trying to Replicate This Strange Slittle DRSSTC? PLS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
August 12, 2022, 02:55:27 AM
post Re: Small DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mike
August 12, 2022, 01:27:14 AM
post Re: Small DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 11, 2022, 11:51:42 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
davekni
August 11, 2022, 11:35:43 PM
post Say what -- arcing TO polycarbonate!
[Voltage Multipliers]
abstruse1
August 11, 2022, 10:56:28 PM
post Re: Half-bridge for my first sstc
[Printed Circuit Board]
Mads Barnkob
August 11, 2022, 07:40:03 PM
post Re: Huge Mistake Designing My Coil
[Spark Gap Tesla Coils (SGTC)]
MarcusFunt
August 11, 2022, 06:54:14 PM
post Re: Huge Mistake Designing My Coil
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
August 11, 2022, 05:07:28 PM
post Half-bridge for my first sstc
[Printed Circuit Board]
LoOdaK
August 11, 2022, 11:13:20 AM
post Huge Mistake Designing My Coil
[Spark Gap Tesla Coils (SGTC)]
MarcusFunt
August 11, 2022, 10:03:54 AM
post Re: Small DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mike
August 11, 2022, 06:12:48 AM
post Re: Painfully Amazing Stuff
[Voltage Multipliers]
klugesmith
August 11, 2022, 03:14:55 AM
post Re: Painfully Amazing Stuff
[Voltage Multipliers]
55#sofcopper
August 11, 2022, 02:55:16 AM
post Painfully Amazing Stuff
[Voltage Multipliers]
alan sailer
August 10, 2022, 10:47:09 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 10, 2022, 07:51:16 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 10, 2022, 06:36:23 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
alan sailer
August 10, 2022, 01:34:40 AM
post Re: High Voltage pcb
[Printed Circuit Board]
FonziDaytona
August 09, 2022, 10:17:24 PM
post Re: High Voltage pcb
[Printed Circuit Board]
Twospoons
August 09, 2022, 10:16:33 PM
post Re: How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 09, 2022, 09:22:37 PM
post Re: High Voltage pcb
[Printed Circuit Board]
Mads Barnkob
August 09, 2022, 09:19:26 PM
post Re: High Voltage pcb
[Printed Circuit Board]
FonziDaytona
August 09, 2022, 08:32:08 PM
post Re: High Voltage pcb
[Printed Circuit Board]
Mads Barnkob
August 09, 2022, 08:26:32 PM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
Mads Barnkob
August 09, 2022, 08:15:54 PM
post High Voltage pcb
[Printed Circuit Board]
FonziDaytona
August 09, 2022, 08:15:10 PM
post Top load material selection
[Spark Gap Tesla Coils (SGTC)]
55#sofcopper
August 09, 2022, 04:44:43 PM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
MRMILSTAR
August 09, 2022, 04:20:01 PM
post Loneoceans UD 2.7 rev c issue
[General Chat]
mthome4
August 09, 2022, 03:11:56 PM
post Re: A big-ish diy xformer
[Transformer (Ferrite Core)]
oneKone
August 09, 2022, 07:30:29 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
August 09, 2022, 07:06:52 AM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 09, 2022, 07:06:34 AM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
davekni
August 09, 2022, 06:28:49 AM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
Twospoons
August 09, 2022, 06:18:56 AM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
davekni
August 09, 2022, 06:08:53 AM
post Re: HV AC Current Measurement
[Transformer (Iron Core)]
klugesmith
August 09, 2022, 04:29:49 AM
post HV AC Current Measurement
[Transformer (Iron Core)]
alan sailer
August 09, 2022, 02:18:35 AM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
TMaxElectronics
August 09, 2022, 12:42:21 AM
post Re: A big-ish diy xformer
[Transformer (Ferrite Core)]
abstruse1
August 09, 2022, 12:31:47 AM
post Re: How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Twospoons
August 09, 2022, 12:22:26 AM
post Re: Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
Twospoons
August 09, 2022, 12:00:39 AM
post Coherent VersaPulse VPW - what should I do with it?
[Light, Lasers and Optics]
TMaxElectronics
August 08, 2022, 11:24:45 PM
post Re: Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
August 08, 2022, 10:07:08 PM
post Re: How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
August 08, 2022, 10:01:56 PM
post Re: Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Maju
August 08, 2022, 10:00:22 PM
post Re: Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:52:09 PM
post Re: Helpy Trying to Replicate This Strange Slittle DRSSTC? PLS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:51:09 PM
post Re: Where To Get "Free" TO-247 IGBTs and MOSFETs
[Electronic Circuits]
TMaxElectronics
August 08, 2022, 09:50:49 PM
post How To Varnish A Tesla Coil Secondary Coil
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:47:24 PM
post Re: Syntherrupter - Build by AstRii
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 08, 2022, 09:44:04 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 08, 2022, 09:43:38 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 08, 2022, 09:42:37 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
petespaco
August 08, 2022, 09:27:10 PM
post Optic fiber interrupter in EU
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
August 08, 2022, 08:09:38 PM
post Helpy Trying to Replicate This Strange Slittle DRSSTC? PLS
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
August 08, 2022, 04:10:00 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
August 08, 2022, 07:54:27 AM
post Re: SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 07, 2022, 07:28:51 PM
post Re: Bipolar CW -- update
[Voltage Multipliers]
abstruse1
August 07, 2022, 07:15:11 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 07, 2022, 06:46:44 PM
post Re: SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alexhanyuan
August 07, 2022, 06:11:59 PM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
fh89
August 07, 2022, 08:25:56 AM
post Re: SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
August 07, 2022, 03:46:50 AM
post SCR precharge
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alexhanyuan
August 06, 2022, 10:23:27 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
davekni
August 06, 2022, 09:34:35 PM
post Re: Can someone help, am not getting any plasma :-) much appreciated
[Spark Gap Tesla Coils (SGTC)]
ItsChloeUwU
August 06, 2022, 07:49:05 PM
post Re: Primary Wire Getting Hot, Secondary flashovers, RSG Not Alway Fireing? Help pls.
[Spark Gap Tesla Coils (SGTC)]
ItsChloeUwU
August 06, 2022, 07:42:00 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AstRii
August 06, 2022, 07:05:35 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
August 06, 2022, 04:06:48 PM
post Re: CORE FOR GDT AND CT
[Solid State Tesla Coils (SSTC)]
Didik
August 05, 2022, 11:59:58 AM
post Re: CORE FOR GDT AND CT
[Solid State Tesla Coils (SSTC)]
Rafft
August 05, 2022, 09:56:26 AM
post Re: CORE FOR GDT AND CT
[Solid State Tesla Coils (SSTC)]
davekni
August 05, 2022, 06:25:39 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal