Author Topic: Keep or throw away ?  (Read 5337 times)

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Keep or throw away ?
« on: January 24, 2019, 11:21:11 AM »
Hello,
These components have been hanging around my workshop for a while.
They look like something that could be used for a cool project but some of them are complete mistery.
Image 1 - I thought these are large IGBT's but they are definitely not.
Images 2 and 3 - Large capacitor bank of unknown rating
Image 4 - another large cap

Please let me know if any of these are worth keeping

Yes, I know that the mouse can be used as a pointing device, it is there fir scale  ;D

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 414
  • Karma: +15/-0
    • View Profile
Re: Keep or throw away ?
« Reply #1 on: January 24, 2019, 12:27:52 PM »
Agree that the semiconductors are only good for scrap - look to be BJTs rather than IGBTs.

As for the capacitors, the last one is worth keeping, the bank might be but is difficult without knowing the rating. If you can measure the physical size of the mystery caps and their capacitance then you may be able to get a ballpark voltage rating though (through comparison with other capacitors of the same size and capacitance), and potentially confirm it by charging them up to the estimated voltage through a current limited supply - if the leakage remains low then they are probably useable at that voltage.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1857
  • Karma: +49/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Keep or throw away ?
« Reply #2 on: January 24, 2019, 12:49:29 PM »
I agree with Hydron on this one.

The power transistors are only good for a paper weight, tech display or selling the copper base for scrap money. I attached a datasheet for the series of Fuji switches.  Even if it was IGBTs they would have a horrible slow switching speeds, low peak current specifications etc etc.

You should search for "capacitor reforming" to get a guide on how to revive old electrolytic capacitors and get an idea of their performance. The last one looks newer than the other, so I would assume that is still in the good end, but could properly need reforming aswell.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Keep or throw away ?
« Reply #3 on: February 07, 2019, 11:27:44 AM »
Thanks for the info, next up, we have some legless components

3 x G40N60UFD Ultra Fast IGBT
2 x F30U60DN Ultra Fast Recovery Rectifiers

Are these any good for SSTC ? With this much speed I’ll be surprised if they aren’t !!
They test OK, and yes I know they should live in an anti static bag  ;D, which they do.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1857
  • Karma: +49/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Keep or throw away ?
« Reply #4 on: February 07, 2019, 12:16:31 PM »
There are people that have successfully built SSTC with IGBTs, but IGBTs are really better suited for a DRSSTC.

So your little silicon stash here is perfect for a small half-bridge coil.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Keep or throw away ?
« Reply #5 on: February 07, 2019, 12:20:52 PM »
Excellent ! Thanks for the info.
DRSSTC is a bit too complex for me right now, i need to get my simple SSTC working first, then hopefully I can move onto something more challenging.

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Keep or throw away ?
« Reply #6 on: March 18, 2019, 09:56:42 PM »
Good for an induction heater ?

Offline Teravolt

  • High Voltage Technician
  • ***
  • Posts: 125
  • Karma: +2/-0
    • View Profile
Re: Keep or throw away ?
« Reply #7 on: March 19, 2019, 01:51:51 AM »
I don't think that the Fuji devices are junk however they are old are going to be slow but you could use them on a ferrite core zvs. maybe a big drsstc or induction heater or coil poper. 6DI120A-060 here is the PDF for the 6DI100A-060

https://datasheet.octopart.com/6DI120A-060-Fuji-datasheet-10733550.pdf

the other old bricks fuji 2di1502-100 are 1000v 150A half bridges. if you know what the voltage rating of the  caps are they would be more useful. there age might affect there performance but if they hold a charge then what the hell at least you have something to mess around with of you don't have a lot of money or find it hard to find parts. I have seen pictures of jalopies that looked like they should not work made from spare parts


Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1857
  • Karma: +49/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Keep or throw away ?
« Reply #8 on: March 19, 2019, 08:24:31 AM »
I don't think that the Fuji devices are junk however they are old are going to be slow but you could use them on a ferrite core zvs. maybe a big drsstc or induction heater or coil poper. 6DI120A-060 here is the PDF for the 6DI100A-060

https://datasheet.octopart.com/6DI120A-060-Fuji-datasheet-10733550.pdf

the other old bricks fuji 2di1502-100 are 1000v 150A half bridges. if you know what the voltage rating of the  caps are they would be more useful. there age might affect there performance but if they hold a charge then what the hell at least you have something to mess around with of you don't have a lot of money or find it hard to find parts. I have seen pictures of jalopies that looked like they should not work made from spare parts

Those 2DI150A bricks are BJT power transistors, not a IGBT, and are not suitable for anything in a 2019 application, its a paper weight, copper base scrap money or experiment with building a class A audio amplifier :)

https://datasheet.octopart.com/2DI150Z-100-Fuji-Semiconductor-datasheet-107136.pdf
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Keep or throw away ?
« Reply #9 on: March 19, 2019, 09:11:09 AM »
I like that idea ! Audio amplifier with a transistor larger than an iPod  ;D

Offline Teravolt

  • High Voltage Technician
  • ***
  • Posts: 125
  • Karma: +2/-0
    • View Profile
Re: Keep or throw away ?
« Reply #10 on: March 19, 2019, 05:12:03 PM »
I still say that if you want for a giant flyback or induction heater they will switch a lot of power of you know what you are doing. they may not be sutible for a DRSSTC because they are slow and old Technology but if you want something to mess around by all means. Do you have a special project in mind and what kind of resources do you have?

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 414
  • Karma: +15/-0
    • View Profile
Re: Keep or throw away ?
« Reply #11 on: March 19, 2019, 08:14:33 PM »
Most likely not even usable for an amplifier - they will not have very good SOA for linear operation. I vote for scrap - that's what I did with my pile of large power BJTs.

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Keep or throw away ?
« Reply #12 on: March 19, 2019, 10:02:41 PM »
I still say that if you want for a giant flyback or induction heater they will switch a lot of power of you know what you are doing. they may not be sutible for a DRSSTC because they are slow and old Technology but if you want something to mess around by all means. Do you have a special project in mind and what kind of resources do you have?

These came out of a very old CNC machines which were sold for scrap from the company I work for.
Capacitor bank came out of EDM - Electric Discharge ( Machining ) Machine, Wire Cutter to be exact.
As far as mechanical engineering resources are concerned, I have access to everything from a hand drill to a Water Jet machine that can cut 100mm steel plate.

With electronics, I have a small bench in my garage with some basic equipment ( scope, FG, soldering station, multimeter, etc. )
As far as expertise in electronics is concerned, it is a case of a lot of desire, but limited understanding. I understand a lot more than an average person, but there is a lot of empty spaces in between.

Offline Teravolt

  • High Voltage Technician
  • ***
  • Posts: 125
  • Karma: +2/-0
    • View Profile
Re: Keep or throw away ?
« Reply #13 on: March 20, 2019, 05:18:07 PM »
you have lots of expierience if you want t learn there is this thread on the other page witch I might try.

https://highvoltageforum.net/index.php?topic=433.0

If you hook up a gate driver circuit and use a resistive load and a stiff 40v power source you might see how well they work. my fealing is what do you have to loose they were free. If you had a nice peace to build like a 3ft DRSSTC I would sugest getteing more modern parts

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Keep or throw away ?
« Reply #14 on: April 05, 2019, 05:05:16 AM »
TDK-Lambda HWS1500-48 Power Supply
48V, 32A, 1500W
Brand new cost $1970 AUD

Rescued two from a dumpster, both worked ok, then one just stopped. I have no schematic or experience to repair it.
I managed to narrow down the fault to one of three boards, but I am not comfortable poking around the PSU while powered up.
Board that you can see on top is faulty. When replaced with the board from the other unit, everything works fine.

Maybe I should scavange the parts and put it back into the bin ?

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: Keep or throw away ?
« Reply #15 on: April 06, 2019, 11:58:27 PM »
Could those bricks be used as rectifiers? You could rectify a transformer to make a good welder. Of course you probably already have one. :-\

Offline Thunderstruck

  • High Voltage Experimenter
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Keep or throw away ?
« Reply #16 on: April 07, 2019, 07:33:15 AM »
Could those bricks be used as rectifiers? You could rectify a transformer to make a good welder. Of course you probably already have one. :-\


Hi AndreiRS,

I suppose they could be used for a welder, but welders are so cheap these days it is not worth the trouble. Only thing you’d get out of it is “I made it myself” feeling.

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: Keep or throw away ?
« Reply #17 on: April 07, 2019, 09:56:04 PM »
Still expensive around here haha.

High Voltage Forum

Re: Keep or throw away ?
« Reply #17 on: April 07, 2019, 09:56:04 PM »

 


* Recent Topics and Posts

post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
Today at 07:54:59 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rafft
Today at 06:44:04 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 12:31:43 AM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
dbach
December 06, 2021, 11:51:07 PM
post Re: profdc9 ud2.7c tht question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
December 06, 2021, 07:48:31 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
December 06, 2021, 03:32:15 PM
post profdc9 ud2.7c tht question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
costas_p
December 06, 2021, 01:57:36 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
December 06, 2021, 11:07:28 AM
post Re: What driver to use for first DRSSTC build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 06, 2021, 04:17:35 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Maju
December 05, 2021, 11:58:51 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
December 05, 2021, 11:21:11 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Maju
December 05, 2021, 08:53:57 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 05, 2021, 08:27:13 PM
post Go Big or Go Home
[Static Electricity]
abstruse1
December 05, 2021, 06:06:28 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
December 05, 2021, 12:35:17 PM
post Re: Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Mads Barnkob
December 05, 2021, 12:02:05 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
dbach
December 05, 2021, 12:20:13 AM
post [Ebay find]: 6x Infineon Fast IGBT Modul FZ400R12KE4 1200V 400A Semitrans
[Sell / Buy / Trade]
Mads Barnkob
December 04, 2021, 11:35:01 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
December 04, 2021, 11:02:35 PM
post Re: Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Da_Stier
December 04, 2021, 01:16:47 PM
post Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Mads Barnkob
December 04, 2021, 09:03:55 AM
post Re: Dissimilar caps for Marx or CW?
[Voltage Multipliers]
Mads Barnkob
December 04, 2021, 08:42:26 AM
post Dissimilar caps for Marx or CW?
[Voltage Multipliers]
abstruse1
December 04, 2021, 05:39:32 AM
post Re: Looking to build by first DRSSTC as a high voltage beginner
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
December 03, 2021, 07:27:09 PM
post Re: help with finding resonant frequency
[Beginners]
HVuser
December 03, 2021, 04:43:39 AM
post Re: Looking to build by first DRSSTC as a high voltage beginner
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
December 03, 2021, 01:37:46 AM
post Re: Practical limitations in size for Marx or CW
[Voltage Multipliers]
abstruse1
December 02, 2021, 11:35:39 PM
post Re: Practical limitations in size for Marx or CW
[Voltage Multipliers]
MRMILSTAR
December 02, 2021, 09:53:13 PM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 02, 2021, 05:10:30 AM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 02, 2021, 04:58:53 AM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
December 02, 2021, 12:47:10 AM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 01, 2021, 10:30:50 PM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
December 01, 2021, 09:10:11 PM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 01, 2021, 06:36:14 AM
post Re: DRSSTC build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
November 30, 2021, 08:10:17 PM
post DRSSTC build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
balazs
November 30, 2021, 06:55:58 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2021, 06:23:03 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
November 30, 2021, 05:58:42 AM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2021, 05:35:58 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 30, 2021, 01:50:18 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
November 30, 2021, 01:19:18 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 30, 2021, 12:07:59 AM
post gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
November 29, 2021, 11:45:44 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 29, 2021, 10:52:43 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Intra
November 29, 2021, 03:15:23 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
November 29, 2021, 03:08:58 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Netzpfuscher
November 29, 2021, 12:15:12 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 29, 2021, 12:26:28 AM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
davekni
November 29, 2021, 12:07:30 AM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
davekni
November 28, 2021, 11:58:24 PM
post GDT (Gate Drive Transformer) tutorial
[Beginners]
davekni
November 28, 2021, 11:40:56 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 28, 2021, 10:21:11 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
johnnyzoo
November 28, 2021, 10:05:40 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
November 28, 2021, 08:13:08 PM
post Re: Infrastructure and Architecture
[General Chat]
futurist
November 28, 2021, 06:12:44 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 28, 2021, 04:48:04 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
PowerTech
November 28, 2021, 03:16:11 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 28, 2021, 09:36:10 AM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
plasma
November 28, 2021, 05:32:16 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 28, 2021, 04:28:33 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 28, 2021, 02:19:00 AM
post Re: Where to buy DIY or home made capacitor book(s)?
[Capacitor Banks]
huntergroundmind
November 28, 2021, 01:58:12 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 28, 2021, 12:53:27 AM
post Re: Driverless SSTC
[Solid State Tesla Coils (SSTC)]
davekni
November 28, 2021, 12:32:09 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
November 28, 2021, 12:16:04 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 27, 2021, 11:42:08 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
November 27, 2021, 11:32:12 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
November 27, 2021, 11:09:43 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
paulj
November 27, 2021, 10:06:41 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
PowerTech
November 27, 2021, 09:40:34 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
davekni
November 27, 2021, 08:51:05 PM
post Re: Infrastructure and Architecture
[General Chat]
Da_Stier
November 27, 2021, 08:09:50 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
PowerTech
November 27, 2021, 06:00:42 PM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 27, 2021, 05:04:46 PM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 04:45:14 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Mads Barnkob
November 27, 2021, 07:59:37 AM
post Re: Contest of motor slowness, or lowness of voltage?
[Science, Research and News In Other Fields Than Electronics]
Mads Barnkob
November 27, 2021, 07:52:59 AM
post Re: FPS1000HD unboxing and first impression
[High Speed Filming]
Mads Barnkob
November 27, 2021, 07:51:01 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
November 27, 2021, 07:47:23 AM
post Re: Infrastructure and Architecture
[General Chat]
Mads Barnkob
November 27, 2021, 07:37:57 AM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
November 27, 2021, 07:21:43 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
patracy
November 27, 2021, 06:06:59 AM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 05:27:27 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 03:19:55 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 02:31:46 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 02:22:20 AM
post Driverless SSTC
[Solid State Tesla Coils (SSTC)]
bismallah
November 26, 2021, 11:59:27 PM
post Infrastructure and Architecture
[General Chat]
Da_Stier
November 26, 2021, 11:27:47 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
klugesmith
November 26, 2021, 11:17:55 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 26, 2021, 08:24:39 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 26, 2021, 07:48:07 PM
post Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
November 26, 2021, 07:44:25 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
davekni
November 26, 2021, 06:58:16 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
plasma
November 26, 2021, 05:40:37 PM
post Re: "Exploding" water
[Capacitor Banks]
MRMILSTAR
November 26, 2021, 04:39:07 PM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 26, 2021, 04:31:20 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Intra
November 26, 2021, 03:52:08 PM
post Re: "Exploding" water
[Capacitor Banks]
johnf
November 26, 2021, 09:17:07 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
paulj
November 26, 2021, 08:45:34 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 26, 2021, 06:31:56 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal