Author Topic: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers  (Read 6184 times)

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« on: May 15, 2018, 03:30:24 AM »
Hello,

I am releasing the DRSSTC PCB pack.  This includes the UD2.9 skip pulse gerbers, as well as PCBs for interrupters and bridge boards.  These boards are all less than 10 by 10 cm and so can be made for $5 from many PCB houses (not including shipping).  If you get many boards made at once, you can spread the cost of the shipping over these boards.

Boards included:

1)   UD2.9 skip pulse
2)   UD2.7 conventional board (without skip pulse)
3)   UD3.1 that uses the PSoC5 CYC8KIT
4)   Half Bridge with 2 transistors and a place for a capacitive divider for the other side of the bridge, and a place for RC snubbers on each transistor
5)   Half Bridge with 8 transistors (4 on each LO/HI side)
6)   Full bridge with 4 transistors and a place for RC snubbers on each transistor
7)   Full Bridge with 8 transistors (2 on each LO/HI side, two half bridges)
8)   Burst interrupter with external triggering
9)   AC line interrupter, includes a spot for the ATTINY85 to implement the OneTesla tiny USB interrupter.

These are all made with kicad, so you can modify them as you need to (kicad is open source software).

Dan

LATEST VERSIONS!: https://highvoltageforum.net/index.php?topic=353.msg2401#msg2401
« Last Edit: March 22, 2021, 07:40:17 PM by Mads Barnkob »

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 330
  • Karma: +10/-0
    • View Profile
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #1 on: May 15, 2018, 10:17:22 AM »
Thank you for the massive contribution. looking forward to see what coils people (myself included) will build with this release. 

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1857
  • Karma: +49/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #2 on: May 15, 2018, 02:06:30 PM »
Thank you Dan!

I envy the amount of work you can get done in little time :)

I will share this on my facebook page for kaizer power electronics.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #3 on: May 19, 2018, 12:32:25 AM »
Hello,

I made a small change to the PCB pack.  The burst interrupter now includes the MIDI USB interrupter as well, for those who don't want to have to try my experimental interrupter to get the MIDI USB capability.  Of course, you don't have to add the chip to the board if you don't want it.  If you get a AVR ISP you can plug it into the interrupter board and program the ATTINY85 chip and have a combination burst/standard/audio triggered/MIDI interrupter that should be good for all kinds of stuff.

The revised DRSSTC PCB pack is attached.

Dan

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Corrected versions of DRSSTC pcb pack
« Reply #4 on: June 01, 2018, 04:24:46 PM »
Hello,

I have a new version of the PCB pack with some minor fixes.

1.   I built the UD3 driver, but I found that some of the components get in the way of plugging the USB into the target board, so I moved around some of the components to allow for better access to the usb connector.

2.  I built the line interrupter.   It works, but I had to tweak a couple of component values.  It is possible that interrupting on the AC could cause a lot of noise for other devices on the circuit.  However, it does seem that it allows for more power to be drawn, perhaps indicating a better power factor.  This requires more study.

3.  The two interrupters contain a USB MIDI interrupter on them that may be optionally populated if you want a combined test/sound/MIDI interrupter.  I have included the compiled project so that the ATTINY85 microcontroller can be programmed, including source code because the code is open source.  It required a few tweaks and updates to work on more modern versions of avr-gcc, which is one reason why I included it.  The fuse bits on the ATTINY85 have to be set as given in the flashing.txt file, and then you can program the microcontroller, both using avrdude.

Dan

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1857
  • Karma: +49/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #5 on: March 13, 2021, 02:04:10 PM »
Hi Dan

I build the interrupter with normal, burst, audio and USB MIDI options. Left out the MIDI for now as I got so many others.

The input voltage range of the LM339 is Vcc -2V at worst, so when I want to run the whole board at 5V, that leaves me with only 0-3V audio input range, what is it currently designed to take with the 9-12V supply voltage?
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #6 on: March 15, 2021, 08:35:37 PM »
Hi Dan

I build the interrupter with normal, burst, audio and USB MIDI options. Left out the MIDI for now as I got so many others.

The input voltage range of the LM339 is Vcc -2V at worst, so when I want to run the whole board at 5V, that leaves me with only 0-3V audio input range, what is it currently designed to take with the 9-12V supply voltage?

Yes, I designed it to take a 9-12 V supply.  But I think it should still work at 5 V.  The threshold for audio input to trigger a pulse is the voltage drop of a Schottky diode, about 0.2 V, high enough above the rail to work reliably.  Everything else is triggered to a threshold voltage created by the voltage divider of R8/R9.  If you are having problems, decrease R8 from 10k to perhaps 6.8k so it is well below the LM339 common-mode limit.

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1857
  • Karma: +49/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #7 on: March 16, 2021, 04:43:45 PM »
Hi Dan

I build the interrupter with normal, burst, audio and USB MIDI options. Left out the MIDI for now as I got so many others.

The input voltage range of the LM339 is Vcc -2V at worst, so when I want to run the whole board at 5V, that leaves me with only 0-3V audio input range, what is it currently designed to take with the 9-12V supply voltage?

Yes, I designed it to take a 9-12 V supply.  But I think it should still work at 5 V.  The threshold for audio input to trigger a pulse is the voltage drop of a Schottky diode, about 0.2 V, high enough above the rail to work reliably.  Everything else is triggered to a threshold voltage created by the voltage divider of R8/R9.  If you are having problems, decrease R8 from 10k to perhaps 6.8k so it is well below the LM339 common-mode limit.

Yeah, I agree, all ICs are specified to work at 5V, so that is not a problem.

Did you mean R8, at input of first op-amp and R9 at output at second op-amp?

Other things I noticed:
- that 0-280'ish us on-time is working, so tweaking a bit for higher on-time is properly needed, but not really important right now.
- BPS can not go high enough, so I guess it goes past the threshold of maximum on-time and its cut off. Around 300 BPS it just goes to 0 BPS, so I think changing R3 from 6K8 to 10K will prevent it from getting over the tipping point, a little more minimum resistance in that RC timing.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Vdekje

  • High Voltage Enthusiast
  • *
  • Posts: 14
  • Karma: +0/-0
    • View Profile
Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #8 on: August 17, 2021, 06:50:13 PM »
Hello,

I am releasing the DRSSTC PCB pack.  This includes the UD2.9 skip pulse gerbers, as well as PCBs for interrupters and bridge boards.  These boards are all less than 10 by 10 cm and so can be made for $5 from many PCB houses (not including shipping).  If you get many boards made at once, you can spread the cost of the shipping over these boards.

Boards included:

1)   UD2.9 skip pulse
2)   UD2.7 conventional board (without skip pulse)
3)   UD3.1 that uses the PSoC5 CYC8KIT
4)   Half Bridge with 2 transistors and a place for a capacitive divider for the other side of the bridge, and a place for RC snubbers on each transistor
5)   Half Bridge with 8 transistors (4 on each LO/HI side)
6)   Full bridge with 4 transistors and a place for RC snubbers on each transistor
7)   Full Bridge with 8 transistors (2 on each LO/HI side, two half bridges)
8)   Burst interrupter with external triggering
9)   AC line interrupter, includes a spot for the ATTINY85 to implement the OneTesla tiny USB interrupter.

These are all made with kicad, so you can modify them as you need to (kicad is open source software).

Dan

LATEST VERSIONS!: https://highvoltageforum.net/index.php?topic=353.msg2401#msg2401

Hi,

The UD2.9 BOM seems to be missing parts? I don't see the TL3116 on it, for instance? Is this intentional, or...?

High Voltage Forum

Re: DRSSTC PCB pack release includes UD2.9 skip pulse gerbers
« Reply #8 on: August 17, 2021, 06:50:13 PM »

 


* Recent Topics and Posts

post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
Today at 07:54:59 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rafft
Today at 06:44:04 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 12:31:43 AM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
dbach
December 06, 2021, 11:51:07 PM
post Re: profdc9 ud2.7c tht question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
December 06, 2021, 07:48:31 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
December 06, 2021, 03:32:15 PM
post profdc9 ud2.7c tht question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
costas_p
December 06, 2021, 01:57:36 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
December 06, 2021, 11:07:28 AM
post Re: What driver to use for first DRSSTC build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 06, 2021, 04:17:35 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Maju
December 05, 2021, 11:58:51 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
December 05, 2021, 11:21:11 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Maju
December 05, 2021, 08:53:57 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 05, 2021, 08:27:13 PM
post Go Big or Go Home
[Static Electricity]
abstruse1
December 05, 2021, 06:06:28 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
December 05, 2021, 12:35:17 PM
post Re: Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Mads Barnkob
December 05, 2021, 12:02:05 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
dbach
December 05, 2021, 12:20:13 AM
post [Ebay find]: 6x Infineon Fast IGBT Modul FZ400R12KE4 1200V 400A Semitrans
[Sell / Buy / Trade]
Mads Barnkob
December 04, 2021, 11:35:01 PM
post Re: MidiStick V2.0: Next gen tesla coil interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
TMaxElectronics
December 04, 2021, 11:02:35 PM
post Re: Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Da_Stier
December 04, 2021, 01:16:47 PM
post Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown
[Radio Frequency]
Mads Barnkob
December 04, 2021, 09:03:55 AM
post Re: Dissimilar caps for Marx or CW?
[Voltage Multipliers]
Mads Barnkob
December 04, 2021, 08:42:26 AM
post Dissimilar caps for Marx or CW?
[Voltage Multipliers]
abstruse1
December 04, 2021, 05:39:32 AM
post Re: Looking to build by first DRSSTC as a high voltage beginner
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
December 03, 2021, 07:27:09 PM
post Re: help with finding resonant frequency
[Beginners]
HVuser
December 03, 2021, 04:43:39 AM
post Re: Looking to build by first DRSSTC as a high voltage beginner
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
December 03, 2021, 01:37:46 AM
post Re: Practical limitations in size for Marx or CW
[Voltage Multipliers]
abstruse1
December 02, 2021, 11:35:39 PM
post Re: Practical limitations in size for Marx or CW
[Voltage Multipliers]
MRMILSTAR
December 02, 2021, 09:53:13 PM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 02, 2021, 05:10:30 AM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
December 02, 2021, 04:58:53 AM
post Re: Syntherrupter - A Feature-rich, Polyphonic Interrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
Max
December 02, 2021, 12:47:10 AM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 01, 2021, 10:30:50 PM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
December 01, 2021, 09:10:11 PM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
December 01, 2021, 06:36:14 AM
post Re: DRSSTC build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
November 30, 2021, 08:10:17 PM
post DRSSTC build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
balazs
November 30, 2021, 06:55:58 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2021, 06:23:03 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
November 30, 2021, 05:58:42 AM
post Re: gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 30, 2021, 05:35:58 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 30, 2021, 01:50:18 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
November 30, 2021, 01:19:18 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 30, 2021, 12:07:59 AM
post gate drive transformer method
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
November 29, 2021, 11:45:44 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 29, 2021, 10:52:43 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Intra
November 29, 2021, 03:15:23 PM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
November 29, 2021, 03:08:58 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Netzpfuscher
November 29, 2021, 12:15:12 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 29, 2021, 12:26:28 AM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
davekni
November 29, 2021, 12:07:30 AM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
davekni
November 28, 2021, 11:58:24 PM
post GDT (Gate Drive Transformer) tutorial
[Beginners]
davekni
November 28, 2021, 11:40:56 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 28, 2021, 10:21:11 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
johnnyzoo
November 28, 2021, 10:05:40 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
November 28, 2021, 08:13:08 PM
post Re: Infrastructure and Architecture
[General Chat]
futurist
November 28, 2021, 06:12:44 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 28, 2021, 04:48:04 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
PowerTech
November 28, 2021, 03:16:11 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 28, 2021, 09:36:10 AM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
plasma
November 28, 2021, 05:32:16 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 28, 2021, 04:28:33 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 28, 2021, 02:19:00 AM
post Re: Where to buy DIY or home made capacitor book(s)?
[Capacitor Banks]
huntergroundmind
November 28, 2021, 01:58:12 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 28, 2021, 12:53:27 AM
post Re: Driverless SSTC
[Solid State Tesla Coils (SSTC)]
davekni
November 28, 2021, 12:32:09 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
davekni
November 28, 2021, 12:16:04 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 27, 2021, 11:42:08 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
304er
November 27, 2021, 11:32:12 PM
post Re: Hi! 811 A tesa coil
[Vacuum Tube Tesla Coils (VTTC)]
jpvvv123
November 27, 2021, 11:09:43 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
paulj
November 27, 2021, 10:06:41 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
PowerTech
November 27, 2021, 09:40:34 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
davekni
November 27, 2021, 08:51:05 PM
post Re: Infrastructure and Architecture
[General Chat]
Da_Stier
November 27, 2021, 08:09:50 PM
post Re: SG3525 push pull snubber calculation
[Transformer (Ferrite Core)]
PowerTech
November 27, 2021, 06:00:42 PM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 27, 2021, 05:04:46 PM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 04:45:14 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Mads Barnkob
November 27, 2021, 07:59:37 AM
post Re: Contest of motor slowness, or lowness of voltage?
[Science, Research and News In Other Fields Than Electronics]
Mads Barnkob
November 27, 2021, 07:52:59 AM
post Re: FPS1000HD unboxing and first impression
[High Speed Filming]
Mads Barnkob
November 27, 2021, 07:51:01 AM
post Re: Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
November 27, 2021, 07:47:23 AM
post Re: Infrastructure and Architecture
[General Chat]
Mads Barnkob
November 27, 2021, 07:37:57 AM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
Mads Barnkob
November 27, 2021, 07:21:43 AM
post Re: BrOdin coil - High power Big sparks!
[Dual Resonant Solid State Tesla coils (DRSSTC)]
patracy
November 27, 2021, 06:06:59 AM
post Re: Someone built Big TC
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 05:27:27 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 03:19:55 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 02:31:46 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
304er
November 27, 2021, 02:22:20 AM
post Driverless SSTC
[Solid State Tesla Coils (SSTC)]
bismallah
November 26, 2021, 11:59:27 PM
post Infrastructure and Architecture
[General Chat]
Da_Stier
November 26, 2021, 11:27:47 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
klugesmith
November 26, 2021, 11:17:55 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 26, 2021, 08:24:39 PM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
November 26, 2021, 07:48:07 PM
post Help on my "first" SSTC (LabCoatz SSTC 2.0)- Popping transistors
[Solid State Tesla Coils (SSTC)]
TiagoBS
November 26, 2021, 07:44:25 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
davekni
November 26, 2021, 06:58:16 PM
post Re: 60hz synchronous motor on 50hz?
[Spark Gap Tesla Coils (SGTC)]
plasma
November 26, 2021, 05:40:37 PM
post Re: "Exploding" water
[Capacitor Banks]
MRMILSTAR
November 26, 2021, 04:39:07 PM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
November 26, 2021, 04:31:20 PM
post Re: Next Gen DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Intra
November 26, 2021, 03:52:08 PM
post Re: "Exploding" water
[Capacitor Banks]
johnf
November 26, 2021, 09:17:07 AM
post Re: Kind of old single piece of glass plate capacitor
[Spark Gap Tesla Coils (SGTC)]
paulj
November 26, 2021, 08:45:34 AM
post Re: Some Starting Questions About My New DRSSTC ???
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ItsChloeUwU
November 26, 2021, 06:31:56 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal