Author Topic: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?  (Read 7406 times)

Offline HVTC

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« on: November 09, 2018, 09:19:13 AM »
First up, I am newbie when it comes to this forum so I am sure I did something wrong.

Basically, I came across this DRSSTC driverhttps://bit.ly/2QA5EYZ but I am not sure what type it is (or if it is any good) and I really don't want to buy in the dark.  This is the only driver I found with a fiber optic interrupter on AE.
« Last Edit: November 09, 2018, 09:28:55 AM by HVTC »

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #1 on: November 09, 2018, 01:29:42 PM »
It certainly is not a 1.3b as that only had one pair of output MOSFETs to the GDT.

It looks much more like a enhanced 2.1, maybe a copy of those 2.7/.8 from loneoceans etc.

With pulse-skipping functionality implemented on a Altera Max II FPGA, it is a very different driver board and also much more advanced if something does not work correctly.

UD1.3 and 2.1 are simple master pieces due to their simple construction and low complexity part number.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline HVTC

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #2 on: November 09, 2018, 02:05:55 PM »
It certainly is not a 1.3b as that only had one pair of output MOSFETs to the GDT.

It looks much more like a enhanced 2.1, maybe a copy of those 2.7/.8 from loneoceans etc.

With pulse-skipping functionality implemented on a Altera Max II FPGA, it is a very different driver board and also much more advanced if something does not work correctly.

UD1.3 and 2.1 are simple master pieces due to their simple construction and low complexity part number.

Thanks for replying! I have another question: https://bit.ly/2Oz5xuw i believe this driver was identified as the 1.3b type in another post but I am not 100% sure. Also, is there a way I can get/make a fiber optic controller for cheap?

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #3 on: November 09, 2018, 02:48:37 PM »
Thanks for replying! I have another question: https://bit.ly/2Oz5xuw i believe this driver was identified as the 1.3b type in another post but I am not 100% sure. Also, is there a way I can get/make a fiber optic controller for cheap?

That looks like a UD1.3b with pulse-width limiting potentiometer.

You can build the relatively simple interrupter from Steve Ward: http://stevehv.4hv.org/drsstc_interrupter.htm

There is also a simple audio interrupter here from ctc-labs: http://kaizerpowerelectronics.dk/tesla-coils/musical-sstcdrsstc-interrupter/

Onetesla midi interupter has a fair price, but also some minor issues and not that user-friendly: http://onetesla.com/products/sd-card-interrupter-kit.html
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline HVTC

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #4 on: November 09, 2018, 02:56:00 PM »
Thanks for replying! I have another question: https://bit.ly/2Oz5xuw i believe this driver was identified as the 1.3b type in another post but I am not 100% sure. Also, is there a way I can get/make a fiber optic controller for cheap?

That looks like a UD1.3b with pulse-width limiting potentiometer.

You can build the relatively simple interrupter from Steve Ward: http://stevehv.4hv.org/drsstc_interrupter.htm

There is also a simple audio interrupter here from ctc-labs: http://kaizerpowerelectronics.dk/tesla-coils/musical-sstcdrsstc-interrupter/

Onetesla midi interupter has a fair price, but also some minor issues and not that user-friendly: http://onetesla.com/products/sd-card-interrupter-kit.html

Is there a way to use fiber optic cable with the circuit from AE and steve ward's interrupter? I am thinking of using an RCA or coaxial cable instead of fiber optic. Also, If I am not mistaken, the 1.3b driver includes ZCS, right?

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #5 on: November 09, 2018, 03:24:06 PM »
With the AE 1.3 driver you can use a matching fiber transmitter diode connected to the steve ward interrupter, if there is issues with polarity of the signal, you can either omit or use an extra hex-schmitt gate that is most likely available on the board as all are not used.

UD1.3b tries to do ZCS switching from the feedback transformer, but it does not have phase-lead compensation as UD2.1 does. This is really only necessary if you plan to push a lot of current through bricks or pushing something else above its limits. F.ex. I never had problems in my DRSSTC1 with UD1.3b: http://kaizerpowerelectronics.dk/tesla-coils/kaizer-drsstc-i/

DO NOT use RCA or coaxial cable instead of fiber optic cable! You will only make problems for yourself in two areas. 1. noise injection into the interrupter and 2. you are no longer galvanic isolated from the mains powered inverter / high voltage side.
« Last Edit: November 09, 2018, 03:26:08 PM by Mads Barnkob »
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline HVTC

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #6 on: November 09, 2018, 04:26:24 PM »
With the AE 1.3 driver you can use a matching fiber transmitter diode connected to the steve ward interrupter, if there is issues with polarity of the signal, you can either omit or use an extra hex-schmitt gate that is most likely available on the board as all are not used.

UD1.3b tries to do ZCS switching from the feedback transformer, but it does not have phase-lead compensation as UD2.1 does. This is really only necessary if you plan to push a lot of current through bricks or pushing something else above its limits. F.ex. I never had problems in my DRSSTC1 with UD1.3b: http://kaizerpowerelectronics.dk/tesla-coils/kaizer-drsstc-i/

DO NOT use RCA or coaxial cable instead of fiber optic cable! You will only make problems for yourself in two areas. 1. noise injection into the interrupter and 2. you are no longer galvanic isolated from the mains powered inverter / high voltage side.

I found a matching fiber optic diode https://bit.ly/2SWaCAG but it seems kinda exotic, with no tutorials or info on how to use it. I couldn't find the appropriate fiber optic cable, too.  Any other options?

The reason I liked the driver in my OP was because it already comes with it's own fiber optic controller and that sort of jazz. Can I use that for my first DRSSTC?

On the IGBT side of things, is this Chinese one any good? https://bit.ly/2RJ0pGh My guess is probably not, but I am not sure why. What are the odds of it working fine? I am working from a limited budget, so I am stuck with Ali Express.
« Last Edit: November 09, 2018, 04:48:49 PM by HVTC »

Offline oneKone

  • High Voltage Engineer
  • ****
  • Posts: 337
  • Karma: +14/-0
    • View Profile
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #7 on: November 09, 2018, 11:45:02 PM »
Welcome to the forum @HVTC

in regards to your first driver you linked, from my experience they do perform the same as a 1.3b, although as mads has said they are not. As for the fibre link they all seem to be using the same standard, what i mean by that is they're all the same polarity (at least based on my experiences with them). I am using the oneTesla interrupter board (diy build) with a standard blue led as the transmitter.

I personally with if you're going for a premade board -especially from china.. you'd want something you can replace parts on easily. 

the two boards from them i'd recommend are (and have used):
https://www.aliexpress.com/item/Tesla-coil-drive-board-DRSSTC-drive-board-optical-interface/32808663591.html?spm=2114.search0104.3.22.35837040tD19C0&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10130_10547_319_10548_317_10696_5728811_453_10084_454_10083_10618_10307_537_536_10131_10132_10133_5733215_5733315_328_10059_10884_5731015_5733115_10887_100031_5733415_321_322_5730015_10103_5733515_5729015_5733615,searchweb201603_1,ppcSwitch_0&algo_expid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9-3&algo_pvid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9

   https://www.aliexpress.com/item/Tesla-coil-high-voltage-arc-arc-lightning-music-DRSSTC-music-cool-DIY-Kit/32821281841.html?spm=2114.search0104.3.203.35837040tD19C0&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10130_10547_319_10548_317_10696_5728811_453_10084_454_10083_10618_10307_537_536_10131_10132_10133_5733215_5733315_328_10059_10884_5731015_5733115_10887_100031_5733415_321_322_5730015_10103_5733515_5729015_5733615,searchweb201603_1,ppcSwitch_0&algo_expid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9-31&algo_pvid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9

Hopefully some of this helps in some way. In all honesty @Mads is a true master, hopefully he can see if there's something wrong with the boards i've linked.

Offline HVTC

  • High Voltage Enthusiast
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Is this cheap DRSSTC driver from Aliexpress the 1.3b type?
« Reply #8 on: November 10, 2018, 07:35:33 AM »
Welcome to the forum @HVTC

in regards to your first driver you linked, from my experience they do perform the same as a 1.3b, although as mads has said they are not. As for the fibre link they all seem to be using the same standard, what i mean by that is they're all the same polarity (at least based on my experiences with them). I am using the oneTesla interrupter board (diy build) with a standard blue led as the transmitter.

I personally with if you're going for a premade board -especially from china.. you'd want something you can replace parts on easily. 

the two boards from them i'd recommend are (and have used):
https://www.aliexpress.com/item/Tesla-coil-drive-board-DRSSTC-drive-board-optical-interface/32808663591.html?spm=2114.search0104.3.22.35837040tD19C0&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10130_10547_319_10548_317_10696_5728811_453_10084_454_10083_10618_10307_537_536_10131_10132_10133_5733215_5733315_328_10059_10884_5731015_5733115_10887_100031_5733415_321_322_5730015_10103_5733515_5729015_5733615,searchweb201603_1,ppcSwitch_0&algo_expid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9-3&algo_pvid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9

   https://www.aliexpress.com/item/Tesla-coil-high-voltage-arc-arc-lightning-music-DRSSTC-music-cool-DIY-Kit/32821281841.html?spm=2114.search0104.3.203.35837040tD19C0&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10130_10547_319_10548_317_10696_5728811_453_10084_454_10083_10618_10307_537_536_10131_10132_10133_5733215_5733315_328_10059_10884_5731015_5733115_10887_100031_5733415_321_322_5730015_10103_5733515_5729015_5733615,searchweb201603_1,ppcSwitch_0&algo_expid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9-31&algo_pvid=4a8fbc4c-9e76-4daf-8f8b-b95f8394dae9

Hopefully some of this helps in some way. In all honesty @Mads is a true master, hopefully he can see if there's something wrong with the boards i've linked.

Thanks for linking those drivers- I am probably going with the second one just because it's a kit. But one issue remains though, and that is the fiber optic controller. Have you ever come across one on AliExpress? Maybe a DIY one from parts on AE? Thanks :)

Offline black.yang

  • High Voltage Enthusiast
  • *
  • Posts: 10
  • Karma: +2/-0
  • China
    • View Profile
关于: 这个便宜的 drsstc 驱动程序从 aliexpress 1.3 b 类型?
« Reply #9 on: January 06, 2019, 08:34:46 AM »
With the AE 1.3 driver you can use a matching fiber transmitter diode connected to the steve ward interrupter, if there is issues with polarity of the signal, you can either omit or use an extra hex-schmitt gate that is most likely available on the board as all are not used.

UD1.3b tries to do ZCS switching from the feedback transformer, but it does not have phase-lead compensation as UD2.1 does. This is really only necessary if you plan to push a lot of current through bricks or pushing something else above its limits. F.ex. I never had problems in my DRSSTC1 with UD1.3b: http://kaizerpowerelectronics.dk/tesla-coils/kaizer-drsstc-i/

DO NOT use RCA or coaxial cable instead of fiber optic cable! You will only make problems for yourself in two areas. 1. noise injection into the interrupter and 2. you are no longer galvanic isolated from the mains powered inverter / high voltage side.

I found a matching fiber optic diode https://bit.ly/2SWaCAG but it seems kinda exotic, with no tutorials or info on how to use it. I couldn't find the appropriate fiber optic cable, too.  Any other options?

The reason I liked the driver in my OP was because it already comes with it's own fiber optic controller and that sort of jazz. Can I use that for my first DRSSTC?

On the IGBT side of things, is this Chinese one any good? https://bit.ly/2RJ0pGh My guess is probably not, but I am not sure why. What are the odds of it working fine? I am working from a limited budget, so I am stuck with Ali Express.

In fact, it uses an audio fiber head.
Carrier-borne Manchester coding requiring a certain frequency
Decoding interrupt signal in CPLD Logic Description
It can be used safely.  :P
« Last Edit: January 06, 2019, 04:58:13 PM by black.yang »
我的 Email:blackhv@foxmail.com

High Voltage Forum

关于: 这个便宜的 drsstc 驱动程序从 aliexpress 1.3 b 类型?
« Reply #9 on: January 06, 2019, 08:34:46 AM »

 


* Recent Topics and Posts

post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
Today at 06:41:39 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
davekni
Today at 04:05:49 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
OmGigaTron
March 18, 2024, 09:08:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 09:07:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
Twospoons
March 18, 2024, 08:57:06 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
MRMILSTAR
March 18, 2024, 03:51:33 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:59:46 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:33:25 PM
post Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 11:02:12 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Twospoons
March 18, 2024, 02:36:11 AM
post Re: Best forum for vacuum tube amplifiers?
[General Chat]
Mads Barnkob
March 17, 2024, 07:42:55 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:15:14 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 05:05:04 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
davekni
March 17, 2024, 04:50:51 AM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Twospoons
March 17, 2024, 04:45:17 AM
post 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:17:51 AM
post Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Terry
March 17, 2024, 01:29:32 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 17, 2024, 12:33:06 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 16, 2024, 08:46:20 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 08:39:24 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 08:21:44 PM
post Best forum for vacuum tube amplifiers?
[General Chat]
yourboi
March 16, 2024, 08:20:13 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 08:07:55 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 03:30:27 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 02:42:39 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 02:22:28 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 16, 2024, 12:36:02 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 15, 2024, 08:56:58 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 15, 2024, 08:06:08 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 15, 2024, 06:44:28 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 15, 2024, 06:20:47 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
March 15, 2024, 05:13:55 AM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
davekni
March 15, 2024, 12:00:51 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
davekni
March 14, 2024, 11:23:20 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 14, 2024, 09:32:27 PM
post Difference between these transformers
[Transformer (Ferrite Core)]
Alberto
March 14, 2024, 09:29:06 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 14, 2024, 09:11:54 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
WolfMoonshirt
March 14, 2024, 06:09:27 PM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 14, 2024, 01:36:35 PM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 14, 2024, 11:43:23 AM
post Re: Super flat QCW simulation (does this look reasonable?)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 14, 2024, 05:03:41 AM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
davekni
March 14, 2024, 04:56:51 AM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 14, 2024, 03:09:45 AM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
March 14, 2024, 02:23:11 AM
post Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 14, 2024, 01:02:32 AM
post Re: Art student Need help with Plasma Toroid
[Beginners]
toooldforthis
March 14, 2024, 12:01:55 AM
post Re: Art student Need help with Plasma Toroid
[Beginners]
alan sailer
March 13, 2024, 10:22:58 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 13, 2024, 09:31:22 PM
post Re: Super flat QCW simulation (does this look reasonable?)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
toooldforthis
March 13, 2024, 07:04:35 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 12, 2024, 11:55:37 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 12, 2024, 10:10:41 PM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 12, 2024, 10:08:51 PM
post No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 12, 2024, 09:13:00 PM
post Re: Anyone know of a good variable driver?
[Beginners]
FPS
March 12, 2024, 06:54:50 PM
post Art student Need help with Plasma Toroid
[Beginners]
lovejdz
March 12, 2024, 11:12:01 AM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Twospoons
March 12, 2024, 01:16:48 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 12, 2024, 01:14:35 AM
post Re: New type of hfsstc using self-oscillating current mode class D
[Solid State Tesla Coils (SSTC)]
Perolodzilla
March 11, 2024, 04:18:50 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
March 11, 2024, 12:50:34 PM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 11, 2024, 08:32:09 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 11, 2024, 05:01:03 AM
post Re: Electric insulator. Paraffin wax?
[General Chat]
MRMILSTAR
March 11, 2024, 04:23:20 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 11, 2024, 02:30:11 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
March 11, 2024, 12:37:52 AM
post Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 10, 2024, 11:06:04 PM
post Re: Bleeder resistor in CW multiplier
[Voltage Multipliers]
davekni
March 10, 2024, 06:58:51 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 10, 2024, 06:49:36 PM
post Bleeder resistor in CW multiplier
[Voltage Multipliers]
Sugarb0y
March 10, 2024, 05:37:39 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 10, 2024, 02:16:25 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 10, 2024, 02:01:12 PM
post New type of hfsstc using self-oscillating current mode class D
[Solid State Tesla Coils (SSTC)]
Perolodzilla
March 10, 2024, 01:03:51 PM
post Re: [WTS] IGBT, Ferrite, Capacitors, Tools, PSU, Industrial components and parts
[Sell / Buy / Trade]
Mads Barnkob
March 10, 2024, 10:16:38 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 10, 2024, 07:10:22 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
MRMILSTAR
March 10, 2024, 05:18:03 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 10, 2024, 04:50:13 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 10, 2024, 03:42:28 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 10, 2024, 12:05:09 AM
post DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 09, 2024, 10:40:11 PM
post Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 08, 2024, 10:49:24 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 08, 2024, 10:22:59 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 08, 2024, 08:22:34 PM
post APC Smart UPS 450 Watt, for Server 19" Rack 1U, Teardown
[Electronic Circuits]
Mads Barnkob
March 08, 2024, 04:07:44 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 08, 2024, 11:56:11 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
petespaco
March 08, 2024, 01:59:43 AM
post Re: Frequency
[Transformer (Ferrite Core)]
davekni
March 07, 2024, 11:35:01 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 07, 2024, 11:00:03 PM
post Re: Unknown Diode Replacement
[Beginners]
davekni
March 07, 2024, 10:55:40 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 07, 2024, 10:46:42 PM
post Re: Frequency
[Transformer (Ferrite Core)]
davekni
March 07, 2024, 10:23:27 PM
post Unknown Diode Replacement
[Beginners]
Luca
March 07, 2024, 09:55:48 PM
post Re: GDT Driver
[Electronic Circuits]
Mads Barnkob
March 07, 2024, 09:55:04 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
markus
March 07, 2024, 05:07:37 PM
post GDT Driver
[Electronic Circuits]
reklm
March 07, 2024, 04:17:12 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 07, 2024, 01:03:47 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 07, 2024, 05:12:31 AM
post Re: Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 07, 2024, 04:45:02 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
petespaco
March 07, 2024, 04:32:17 AM
post Re: Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 07, 2024, 03:43:25 AM
post Re: DIY induction guns? (warning:long)
[Induction Launchers, Coil Guns and Rails guns]
Michelle_
March 07, 2024, 03:22:34 AM
post Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 07, 2024, 02:35:54 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal