Author Topic: Moving to a new lab!  (Read 11187 times)

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Moving to a new lab!
« on: February 16, 2018, 08:55:47 AM »
Follow me as I move from my old small 10 sq.m. lab to a new 20 sq.m lab and with additional 20 sq.m work shop.

This is part 1 in a series of videos on moving out, moving in and setting up the new lab / work shop.

I am moving out of the apartment and into our own house, which has a room dedicated to the laboratory and a work shop for rough work.

« Last Edit: March 08, 2018, 08:16:47 PM by Mads Barnkob »
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: Moving to a new lab! (Part 1) Old basement lab tour and future projects
« Reply #1 on: February 16, 2018, 05:28:20 PM »
You really need more space :)

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: Moving to a new lab! (Part 1) Old basement lab tour and future projects
« Reply #2 on: February 16, 2018, 11:51:26 PM »
Will get the video link to watch on the faster internet.

But anyway, going from 10m2 to 20 is very good.

The maximum I have here is 18 I think. But after I crowded the space with transformer, old motors and some cheap tools, there is around 12m2 left.

Offline DaiKen

  • High Voltage Enthusiast
  • *
  • Posts: 31
  • Karma: +0/-0
    • View Profile
Re: Moving to a new lab! (Part 1) Old basement lab tour and future projects
« Reply #3 on: February 18, 2018, 10:39:57 AM »
Thanks for the nice video and good luck with moving all this stuff!

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #4 on: March 08, 2018, 08:17:07 PM »
Here you get a short glimpse of the new space for lab and work shop.

This is part 2 in a series of videos on moving out, moving in and setting up the new lab / work shop.

I am moving out of the apartment and into our own house, which has a room dedicated to the laboratory and a work shop for rough work.

https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline AndreiRS

  • High Voltage Experimenter
  • **
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: Moving to a new lab!
« Reply #5 on: March 09, 2018, 05:17:54 AM »
Nice. You have more space there. I'm not the biggest fan of the gothic style, but it seems you are not too. :P

By the way, today I finished changing the light bulbs here for LED. Some warm colors, and some intense white for working areas. It really makes a lot of difference. The best one by far is the LED tube, they are just like "old" fluorescent lights. Maybe that can help you a lot. These new lights are a lot better to work at night. Now I can work for some time instead of wanting to take a nap due to the low lights I had before. When I first heard about these led lights I was like "mehhhhhh", but I have to admit some are really good.

I use very cheap shelves here. I would cut 0,5 - 1cm of the back legs, then they will lean back. Or you could screw the top of the shelve to the wall too.

70w halogen lamp.

https://s13.postimg.org/uouzevvlj/70w_Halogen.jpg

72w led tubes.

https://s13.postimg.org/bjrq54onb/72w_LED.jpg

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: Moving to a new lab!
« Reply #6 on: March 09, 2018, 03:59:17 PM »
Congratulations on the extra space!   A little unsolicited advice perhaps.  Keep space between shelves and boxes so you can check for critters that like to take residence in boxes and make sure there's no fire hazards, especially from leaking oil or solvents or lots of loose paper.   In the basement, keep the bottom shelves perhaps 15-30 cm off the ground in case there is flooding or standing water, being lowland Denmark I suppose that's a possibility.  Make sure the sump pump (basement well pump) is working, and maybe get one with a battery backup or replace the battery in case you lose power in a storm.

Dan


Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #7 on: March 11, 2018, 09:09:31 PM »
72 Watt LED is quite a lot of light, I bought four 14 Watt LED tubes for the garage, just to get some normal go through / find stuff light and then I will add some extra work lights at the table and machinery.

Good advice on the shelves/racks distance between them, instead of filling up a wall completely and there is no chance to see what is going on behind them.

There is no sump pump in this house, so we are battling moist in the basement by heating and ventilation. I will of-cause keep anything of special value above table height :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: Moving to a new lab!
« Reply #8 on: March 12, 2018, 12:35:21 AM »
If you keep all your valuable gear 30 cm or so off the floor, you can put a pump in the basement, and it might save you in the case of flooding.  Many of these pumps switch on automatically when they are in a few cm of water, so if you are not home, it will kick in and start pumping.  I have seen too much valuable stuff get ruined this way.

Dan

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #9 on: April 10, 2018, 09:49:34 PM »
Part 3 is online, it has been hard work to get the house ready for moving in and moving the lab/electronics stuff took way more time than imagined and there was endless amounts of stuff to move :)

https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline profdc9

  • High Voltage Engineer
  • ****
  • Posts: 262
  • Karma: +14/-0
    • View Profile
Re: Moving to a new lab!
« Reply #10 on: April 11, 2018, 08:53:45 PM »
Let me know when you have your yard sale, I'd like to look over your collection of doomsday devices. :)

One question, why the name kaizerpowerelectronics?

Dan

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #11 on: April 15, 2018, 10:12:58 PM »
Let me know when you have your yard sale, I'd like to look over your collection of doomsday devices. :)

One question, why the name kaizerpowerelectronics?

Dan

Keep an eye on the sales subforum, if that ever happens ;)

As a young teenager I was a huge fan of this Norwegian band https://en.wikipedia.org/wiki/Kaizers_Orchestra and I went by the nickname Mads Kaizer, so when I wanted a domain for my electronics site, that was my first thought.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #12 on: June 05, 2018, 05:23:00 PM »
/>
Part 4 is here, after a long break due to business travel and more house building. I now have the work shop in a state where I can use my bench and the lab is getting populated soon.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 487
  • Karma: +24/-0
    • View Profile
Re: Moving to a new lab!
« Reply #13 on: June 05, 2018, 11:35:19 PM »
I like it that you have "Lightning and Power installed" - more appropriate than normal Lighting :P

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #14 on: November 08, 2018, 08:56:33 PM »
Seems that I forgot to post part 5 long ago, so here is both part 5 and part 6 :)

/>
/>
I am operational again!
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline the_anomaly

  • High Voltage Enthusiast
  • *
  • Posts: 39
  • Karma: +2/-0
    • View Profile
Re: Moving to a new lab!
« Reply #15 on: November 09, 2018, 01:42:06 PM »
Nice equipment!  How do you like the Rigol scope?  I was going to get one but I heard some mixed reviews.

Did you ever get the solar panels set up?

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #16 on: November 09, 2018, 02:08:54 PM »
I am very satisfied with the DS1054z, when I bought it on offer from Batronics at release there was no other alternatives with such a feature pack at 300€, bigger is of-course always better but at the end of the day, the display and speed it plenty for my work.

I picked up my solar cells from storage a couple of weeks ago, I am waiting for ordered connectors and to find some batteries for the bank. I got a charger from Victron, I will update the solar cell thread once I got some more to tell :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 487
  • Karma: +24/-0
    • View Profile
Re: Moving to a new lab!
« Reply #17 on: November 10, 2018, 04:51:13 PM »
Nice equipment!  How do you like the Rigol scope?  I was going to get one but I heard some mixed reviews.

Did you ever get the solar panels set up?

That Rigol was probably the best value low end scope up until a year or so ago, but I'd look at the 4 channel Siglent SDS1000X-E units as an alternate option now - have not used one but it sounds like there are some very significant improvements vs the Rigol for not much more money.

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #18 on: November 11, 2018, 09:47:17 PM »
Nice equipment!  How do you like the Rigol scope?  I was going to get one but I heard some mixed reviews.

Did you ever get the solar panels set up?

That Rigol was probably the best value low end scope up until a year or so ago, but I'd look at the 4 channel Siglent SDS1000X-E units as an alternate option now - have not used one but it sounds like there are some very significant improvements vs the Rigol for not much more money.

After seeing the Rigol MSO5000 series on eevblog today, if you have 999$+239$ for waveform generator... thats one hell of a 4ch scope.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Mads Barnkob

  • Administrator
  • Executive Board Member
  • *****
  • Posts: 2258
  • Karma: +70/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Moving to a new lab!
« Reply #19 on: August 12, 2020, 10:30:54 PM »
The old rotten and leaking workshop wall and door appeared to be installed on top of an even older rotted wall. It was time to do it properly, I broke everything down and built a new wall with fiber cement, insulation and some proper wood panels on the inside.

https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

High Voltage Forum

Re: Moving to a new lab!
« Reply #19 on: August 12, 2020, 10:30:54 PM »

 


* Recent Topics and Posts

post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
Today at 06:41:39 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
davekni
Today at 04:05:49 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
OmGigaTron
March 18, 2024, 09:08:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 09:07:35 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
Twospoons
March 18, 2024, 08:57:06 PM
post Re: Can I Trust This Super Cheap Site?
[General Chat]
MRMILSTAR
March 18, 2024, 03:51:33 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:59:46 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 18, 2024, 02:33:25 PM
post Can I Trust This Super Cheap Site?
[General Chat]
2020-Man
March 18, 2024, 11:02:12 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Twospoons
March 18, 2024, 02:36:11 AM
post Re: Best forum for vacuum tube amplifiers?
[General Chat]
Mads Barnkob
March 17, 2024, 07:42:55 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:15:14 PM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 05:05:04 AM
post Re: Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
davekni
March 17, 2024, 04:50:51 AM
post Re: 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Twospoons
March 17, 2024, 04:45:17 AM
post 2x Panasonic Inverter Microwaves - what to salvage, dangers?
[General Chat]
Michelle_
March 17, 2024, 04:17:51 AM
post Where's all this voltage coming from?
[Spark Gap Tesla Coils (SGTC)]
Terry
March 17, 2024, 01:29:32 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 17, 2024, 12:33:06 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 16, 2024, 08:46:20 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 08:39:24 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 08:21:44 PM
post Best forum for vacuum tube amplifiers?
[General Chat]
yourboi
March 16, 2024, 08:20:13 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 08:07:55 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 03:30:27 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
March 16, 2024, 02:42:39 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Edi
March 16, 2024, 02:22:28 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 16, 2024, 12:36:02 AM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 15, 2024, 08:56:58 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 15, 2024, 08:06:08 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 15, 2024, 06:44:28 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 15, 2024, 06:20:47 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
March 15, 2024, 05:13:55 AM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
davekni
March 15, 2024, 12:00:51 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
davekni
March 14, 2024, 11:23:20 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 14, 2024, 09:32:27 PM
post Difference between these transformers
[Transformer (Ferrite Core)]
Alberto
March 14, 2024, 09:29:06 PM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 14, 2024, 09:11:54 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
WolfMoonshirt
March 14, 2024, 06:09:27 PM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 14, 2024, 01:36:35 PM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 14, 2024, 11:43:23 AM
post Re: Super flat QCW simulation (does this look reasonable?)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 14, 2024, 05:03:41 AM
post Re: No Corona Discharge with ZVS Driver
[Beginners]
davekni
March 14, 2024, 04:56:51 AM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 14, 2024, 03:09:45 AM
post Re: Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
March 14, 2024, 02:23:11 AM
post Bleeder resistor for MMC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Keybored
March 14, 2024, 01:02:32 AM
post Re: Art student Need help with Plasma Toroid
[Beginners]
toooldforthis
March 14, 2024, 12:01:55 AM
post Re: Art student Need help with Plasma Toroid
[Beginners]
alan sailer
March 13, 2024, 10:22:58 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 13, 2024, 09:31:22 PM
post Re: Super flat QCW simulation (does this look reasonable?)
[Dual Resonant Solid State Tesla coils (DRSSTC)]
toooldforthis
March 13, 2024, 07:04:35 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 12, 2024, 11:55:37 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 12, 2024, 10:10:41 PM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 12, 2024, 10:08:51 PM
post No Corona Discharge with ZVS Driver
[Beginners]
MaybeJosh
March 12, 2024, 09:13:00 PM
post Re: Anyone know of a good variable driver?
[Beginners]
FPS
March 12, 2024, 06:54:50 PM
post Art student Need help with Plasma Toroid
[Beginners]
lovejdz
March 12, 2024, 11:12:01 AM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Twospoons
March 12, 2024, 01:16:48 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 12, 2024, 01:14:35 AM
post Re: New type of hfsstc using self-oscillating current mode class D
[Solid State Tesla Coils (SSTC)]
Perolodzilla
March 11, 2024, 04:18:50 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
March 11, 2024, 12:50:34 PM
post Re: Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 11, 2024, 08:32:09 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 11, 2024, 05:01:03 AM
post Re: Electric insulator. Paraffin wax?
[General Chat]
MRMILSTAR
March 11, 2024, 04:23:20 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 11, 2024, 02:30:11 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
TMaxElectronics
March 11, 2024, 12:37:52 AM
post Electric insulator. Paraffin wax?
[General Chat]
Alberto
March 10, 2024, 11:06:04 PM
post Re: Bleeder resistor in CW multiplier
[Voltage Multipliers]
davekni
March 10, 2024, 06:58:51 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 10, 2024, 06:49:36 PM
post Bleeder resistor in CW multiplier
[Voltage Multipliers]
Sugarb0y
March 10, 2024, 05:37:39 PM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 10, 2024, 02:16:25 PM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 10, 2024, 02:01:12 PM
post New type of hfsstc using self-oscillating current mode class D
[Solid State Tesla Coils (SSTC)]
Perolodzilla
March 10, 2024, 01:03:51 PM
post Re: [WTS] IGBT, Ferrite, Capacitors, Tools, PSU, Industrial components and parts
[Sell / Buy / Trade]
Mads Barnkob
March 10, 2024, 10:16:38 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 10, 2024, 07:10:22 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
MRMILSTAR
March 10, 2024, 05:18:03 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 10, 2024, 04:50:13 AM
post Re: DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 10, 2024, 03:42:28 AM
post Re: Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Twospoons
March 10, 2024, 12:05:09 AM
post DRSSTC Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
March 09, 2024, 10:40:11 PM
post Simple oscillator instead a ZVS
[Transformer (Ferrite Core)]
Alberto
March 08, 2024, 10:49:24 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 08, 2024, 10:22:59 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
March 08, 2024, 08:22:34 PM
post APC Smart UPS 450 Watt, for Server 19" Rack 1U, Teardown
[Electronic Circuits]
Mads Barnkob
March 08, 2024, 04:07:44 PM
post Re: 160mm DRSSTC II project | Questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Late
March 08, 2024, 11:56:11 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
petespaco
March 08, 2024, 01:59:43 AM
post Re: Frequency
[Transformer (Ferrite Core)]
davekni
March 07, 2024, 11:35:01 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 07, 2024, 11:00:03 PM
post Re: Unknown Diode Replacement
[Beginners]
davekni
March 07, 2024, 10:55:40 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 07, 2024, 10:46:42 PM
post Re: Frequency
[Transformer (Ferrite Core)]
davekni
March 07, 2024, 10:23:27 PM
post Unknown Diode Replacement
[Beginners]
Luca
March 07, 2024, 09:55:48 PM
post Re: GDT Driver
[Electronic Circuits]
Mads Barnkob
March 07, 2024, 09:55:04 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
markus
March 07, 2024, 05:07:37 PM
post GDT Driver
[Electronic Circuits]
reklm
March 07, 2024, 04:17:12 PM
post Re: Frequency
[Transformer (Ferrite Core)]
Alberto
March 07, 2024, 01:03:47 PM
post Re: CM400 Induction Heater
[Electronic Circuits]
davekni
March 07, 2024, 05:12:31 AM
post Re: Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
March 07, 2024, 04:45:02 AM
post Re: CM400 Induction Heater
[Electronic Circuits]
petespaco
March 07, 2024, 04:32:17 AM
post Re: Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
March 07, 2024, 03:43:25 AM
post Re: DIY induction guns? (warning:long)
[Induction Launchers, Coil Guns and Rails guns]
Michelle_
March 07, 2024, 03:22:34 AM
post Secondary Splicing
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
March 07, 2024, 02:35:54 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal