Author Topic: Reverse engineering a big old American smoke detector  (Read 3240 times)

Offline klugesmith

  • High Voltage Engineer
  • ****
  • Posts: 472
  • Karma: +16/-0
    • View Profile
Reverse engineering a big old American smoke detector
« on: March 15, 2020, 09:50:48 PM »
Just noticed the thread about big old Soviet smoke detector, which makes this one seem as safe as baby ducklings.  Told this story yesterday, in almost the same words, on another forum.

Here is an old stock Pyrotronics F5B smoke detector head, similar to the F3/5 head. They are still available for people maintaining old installations, but typically cost well over $100 on ebay.

Ionization-type smoke detectors seem to have started in the 1960's. Preventing fires in industrial & institutional settings easily justified the proliferation of 80 microcurie Am-241 alpha particle sources. Those produce enough air ionization that a cold cathode trigger tube can switch the alarm circuit.

I got the pictured device to turn on a neon lamp, within a few seconds of being exposed to smoke from a smoldering popsicle stick. My circuit is shown below, on the right. The original application uses Base Units (sockets) with resistors and a neon indicator lamp, and if any reader has one I'd love to know the circuit details.

.
These old smoke detectors, just like modern ones with less than 1 uCi of radioisotope, use a reference ionization chamber as the high impedance on top of voltage divider. Cheaper than a many-gigaohm resistor, and it automatically compensates for pressure and temperature and decay of the alpha particle source.

I found out that the internal construction is similar to this unfinished drawing.  The ion chambers in schematic above were rendered accordingly.


It came as a surprise that the larger ionization source, which irradiates the smoky chamber, is directly visible through the window-screened ports. Close enough that energetic alpha particles, not just ions, could be escaping from the enclosure. Let's check with some alpha-viewing fluorescent film, like what's sold for making spinthariscopes.


Set shutter time to 30 s, aperture f/1.4, ISO 12800. Lights off, not completely. Go...


This device could be disassembled without any screwdriving, wrenching, or cutting. 
Not sure if that's a good idea, or a thing to talk about.
Even if it were reassembled and tested as a working smoke detector, good as new, ready to protect lives.

Offline John123

  • High Voltage Engineer
  • ****
  • Posts: 227
  • Karma: +5/-0
  • All the gear, no idea. UK
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #1 on: March 16, 2020, 05:57:16 AM »
Looks quite big in the photo compared to the ones inside modern detectors.

How come they were designed as replaceable parts, do they wear out and become unreliable over time?

Offline johnf

  • High Voltage Technician
  • ***
  • Posts: 189
  • Karma: +6/-0
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #2 on: March 18, 2020, 07:34:09 PM »
I think the part has been made much like tubes were made
in fact that looks like a standard octal tube base with a few pins missing.
this would fit well with early electronics manufacture allowing all to be tested before the detector head was put in

Offline TheMaxii2007

  • High Voltage Enthusiast
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #3 on: June 02, 2020, 04:19:02 AM »
Hello My old smoke detector Am-241 (72 microcurie )  ;)






« Last Edit: June 02, 2020, 04:32:01 AM by TheMaxii2007 »

Offline klugesmith

  • High Voltage Engineer
  • ****
  • Posts: 472
  • Karma: +16/-0
    • View Profile
Re: Reverse engineering a big old American smoke detector
« Reply #4 on: June 04, 2020, 06:30:09 AM »
Welcome to the forum, and thank you for the interesting report.

The sectional drawing you shared is much better than anything I've seen before.
It sure beats measuring parts and drawing things from scratch.
Does the document it came from include details of the circuit in base unit?

Is there a model number and/or date code on your device? 
How come the nominal activity is 72 uCi, vs 80 uCi in my specimens and in the F3/5 model we can read about?

Might as well share a picture I made with alpha-viewing film, to get an idea of relative activity in the outer and inner chamber irradiators, next to a modern sub-1-uCi source.
« Last Edit: June 04, 2020, 06:49:45 AM by klugesmith »

Offline TheMaxii2007

  • High Voltage Enthusiast
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile

High Voltage Forum

Re: Reverse engineering a big old American smoke detector
« Reply #5 on: June 06, 2020, 10:44:15 PM »

 


* Recent Topics and Posts

post Hamilton drills model1206
[Induction Launchers, Coil Guns and Rails guns]
Range4Harry
May 16, 2022, 11:25:14 PM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Robert3z
May 16, 2022, 02:21:11 PM
post Re: ZVS driver based DRSSTC with pictures and details - Student project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
CwhyteKGMS
May 16, 2022, 07:29:15 AM
post Re: ZVS driver based DRSSTC with pictures and details - Student project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 16, 2022, 04:53:18 AM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
davekni
May 16, 2022, 04:36:44 AM
post ZVS driver based DRSSTC with pictures and details - Student project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
CwhyteKGMS
May 16, 2022, 03:53:48 AM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Robert3z
May 16, 2022, 02:20:58 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
May 15, 2022, 11:59:37 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
May 15, 2022, 11:08:49 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
May 15, 2022, 09:43:07 PM
post Re: Kaizer DRSSTC 3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
May 15, 2022, 08:22:11 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
May 15, 2022, 08:03:13 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
May 15, 2022, 07:49:51 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
May 15, 2022, 06:58:45 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
May 15, 2022, 06:47:53 PM
post Re: Kaizer DRSSTC 3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
May 15, 2022, 04:13:02 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
May 15, 2022, 02:38:18 PM
post Re: Kaizer DRSSTC 3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 15, 2022, 03:53:35 AM
post Bipolar CW
[Voltage Multipliers]
abstruse1
May 15, 2022, 03:46:25 AM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
May 15, 2022, 03:40:42 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
davekni
May 15, 2022, 02:06:53 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
haversin
May 14, 2022, 10:26:32 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
May 14, 2022, 09:52:06 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
May 14, 2022, 09:25:23 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
May 14, 2022, 08:14:38 PM
post Re: Problem with SSTC
[Solid State Tesla Coils (SSTC)]
davekni
May 14, 2022, 08:02:22 PM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coileone
May 14, 2022, 06:15:59 PM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coileone
May 14, 2022, 06:12:32 PM
post Problem with SSTC
[Solid State Tesla Coils (SSTC)]
Nunu00
May 14, 2022, 05:18:16 PM
post Re: Wago "Lever Nuts"?
[General Chat]
Mads Barnkob
May 14, 2022, 03:24:48 PM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 13, 2022, 11:06:50 PM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
May 13, 2022, 09:28:35 PM
post Re: Kaizer DRSSTC 3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
May 13, 2022, 09:24:22 PM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coileone
May 13, 2022, 02:13:19 PM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coileone
May 13, 2022, 02:09:23 PM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 13, 2022, 06:16:20 AM
post Re: Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
klugesmith
May 13, 2022, 01:57:25 AM
post Flanging sound coming from DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Coileone
May 12, 2022, 10:05:32 PM
post Re: 3 Phase 400 VAC 6 A Variac Stack With Voltage/Current Meters
[Transformer (Iron Core)]
rikkitikkitavi
May 12, 2022, 09:41:04 PM
post Re: Thermometers
[Laboratories, Equipment and Tools]
rikkitikkitavi
May 12, 2022, 09:33:38 PM
post Re: Wago "Lever Nuts"?
[General Chat]
rikkitikkitavi
May 12, 2022, 09:27:40 PM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Robert3z
May 12, 2022, 02:13:03 PM
post Re: Hi frequency ringing with GDT
[Solid State Tesla Coils (SSTC)]
davekni
May 12, 2022, 06:39:55 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
davekni
May 12, 2022, 06:27:47 AM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
davekni
May 12, 2022, 06:22:48 AM
post Wago "Lever Nuts"?
[General Chat]
abstruse1
May 12, 2022, 04:32:19 AM
post Re: Transistor choice
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 12, 2022, 03:32:22 AM
post Re: Thermometers
[Laboratories, Equipment and Tools]
Twospoons
May 12, 2022, 12:00:11 AM
post Re: Kaizer DRSSTC 3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
klugesmith
May 11, 2022, 09:53:15 PM
post Kaizer DRSSTC 3
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
May 11, 2022, 09:40:00 PM
post Re: Hi frequency ringing with GDT
[Solid State Tesla Coils (SSTC)]
CarldeLevis
May 11, 2022, 09:39:21 PM
post Thermometers
[Laboratories, Equipment and Tools]
klugesmith
May 11, 2022, 09:36:59 PM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
Nicolas
May 11, 2022, 09:29:45 PM
post Re: Litz Wire?
[General Chat]
Mads Barnkob
May 11, 2022, 08:45:57 PM
post Re: Hi frequency ringing with GDT
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
May 11, 2022, 08:43:38 PM
post Hi frequency ringing with GDT
[Solid State Tesla Coils (SSTC)]
CarldeLevis
May 11, 2022, 05:44:40 PM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Hydron
May 11, 2022, 04:17:34 PM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Robert3z
May 11, 2022, 03:10:27 PM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Hydron
May 11, 2022, 01:46:57 PM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Robert3z
May 11, 2022, 12:37:19 PM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
Uspring
May 11, 2022, 11:33:30 AM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Hydron
May 11, 2022, 11:00:59 AM
post Re: Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
davekni
May 11, 2022, 06:30:45 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
davekni
May 11, 2022, 06:11:08 AM
post Re: Litz Wire?
[General Chat]
abstruse1
May 11, 2022, 04:00:41 AM
post Driving the primary with other than 60Hz
[Spark Gap Tesla Coils (SGTC)]
Robert3z
May 11, 2022, 02:06:34 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
Mads Barnkob
May 10, 2022, 07:52:45 PM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
Nicolas
May 10, 2022, 10:04:27 AM
post Re: Transistor choice
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
May 10, 2022, 09:31:39 AM
post Re: Litz Wire?
[General Chat]
Mads Barnkob
May 10, 2022, 09:29:19 AM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Mads Barnkob
May 10, 2022, 09:23:38 AM
post Re: Transistor choice
[Dual Resonant Solid State Tesla coils (DRSSTC)]
AstRii
May 10, 2022, 07:24:33 AM
post Transistor choice
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 10, 2022, 03:33:10 AM
post Litz Wire?
[General Chat]
abstruse1
May 10, 2022, 03:16:29 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
DashApple
May 09, 2022, 07:41:51 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
johnf
May 09, 2022, 05:39:51 AM
post Re: Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
davekni
May 09, 2022, 12:44:13 AM
post Re: First tesla coil building / Questions before ignition
[Spark Gap Tesla Coils (SGTC)]
Nicolas
May 09, 2022, 12:24:37 AM
post Home made Wimshurst machine and Van De Graaf generator
[Static Electricity]
Nicolas
May 09, 2022, 12:21:40 AM
post Ground, Grounding, Grounded?
[General Chat]
abstruse1
May 09, 2022, 12:13:01 AM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 08, 2022, 06:43:31 PM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rafft
May 08, 2022, 07:43:13 AM
post Re: 3 Phase 400 VAC 6 A Variac Stack With Voltage/Current Meters
[Transformer (Iron Core)]
Mads Barnkob
May 07, 2022, 07:59:36 PM
post Re: Welcome new members, come say hello and tell a little about yourself :)
[General Chat]
Robert3z
May 07, 2022, 06:41:41 PM
post Re: Capacitor Esoterica
[General Chat]
abstruse1
May 07, 2022, 05:57:22 PM
post Re: 3 Phase 400 VAC 6 A Variac Stack With Voltage/Current Meters
[Transformer (Iron Core)]
Hydron
May 07, 2022, 03:43:57 PM
post 3 Phase 400 VAC 6 A Variac Stack With Voltage/Current Meters
[Transformer (Iron Core)]
Mads Barnkob
May 07, 2022, 03:21:16 PM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rafft
May 07, 2022, 06:52:29 AM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 07, 2022, 04:57:41 AM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rafft
May 06, 2022, 08:54:52 AM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 06, 2022, 02:54:44 AM
post Re: DRSSTC No Breakout On Topload
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Dhaygoh
May 05, 2022, 05:26:27 PM
post Re: DRSSTC No Breakout On Topload
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Dhaygoh
May 05, 2022, 05:14:32 PM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rafft
May 05, 2022, 06:29:00 AM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 05, 2022, 05:56:01 AM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rafft
May 05, 2022, 05:11:45 AM
post Re: QCW questions
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 05, 2022, 04:37:42 AM
post Re: DRSSTC No Breakout On Topload
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 05, 2022, 04:19:47 AM
post Re: Capacitor Esoterica
[General Chat]
johnf
May 04, 2022, 11:22:09 PM
post Re: DRSSTC driver in the chip shortage
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
May 04, 2022, 11:04:19 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal