Author Topic: Mineral oil breakdown voltage  (Read 5987 times)

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 561
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Mineral oil breakdown voltage
« on: December 14, 2019, 05:00:39 PM »
I plan on using food-grade mineral oil for my CW multiplier project as insulator. For purposes of parts separation I am assuming that the breakdown voltage of mineral oil is 10 KV/mm. Does this seem about right?
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 706
  • Karma: +22/-0
    • View Profile
Re: Mineral oil breakdown voltage
« Reply #1 on: December 14, 2019, 06:21:27 PM »
First caveat: in oil, just like air, sharp edges and points concentrate the E-field. 
Breakdown voltages given in kV/mm are for slightly convex electrodes much wider than the gap distance.
They need to be derated for less favorable geometries.

10 kV/mm sounds like a good ballpark value for dry, gas-free mineral oil, in my unpracticed opinion.
In the trade, insulating oils are specified and tested according to IEC and ASTM standards, which all use AC voltage.
It seems reasonable to expect 40% higher breakdown voltage in DC tests. 
Anybody here know better?  How about AC at tens of kHz?


Here's a brochure about an oil tester,
https://www.instrumart.com/assets/Megger-Oil-Testing-Datasheet.pdf

and a snip from an oil datasheet, in which the density values look unrealistically high (by factor of 10^9).



Personally I have plan to test any HV insulating oil for hobby use.  Can a 1 mm thickness hold off NST voltage?  Commercial BDV testers immediately turn off the voltage when breakdown occurs.  It wasn't hard to find cabinet door knobs with curvature matching the test standards.  Here shown with a caliper that is resistant to oil and vinegar.


« Last Edit: December 14, 2019, 06:49:23 PM by klugesmith »

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 561
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Mineral oil breakdown voltage
« Reply #2 on: December 14, 2019, 08:32:36 PM »
Thanks for the info Rich. There's definitely something wrong with that density number. Maybe they were thinking of neutron star material!  :)

I need to pack the following into a 4" x 36" tube to achieve a reasonable size and weight for my 14-stage CW multiplier.

* 28 doorknob capacitors (1.88" x 0.88" each)
* 28 HV diode strings (3 diodes per string)
* 28 HV resistors
* About 2 gallons of oil

I have been doing some preliminary layout and it looks like everything will fit. I estimate that the weight of the tube, components, and oil will be about 30 pounds. Its going to be a tight fit so I have to carefully consider any pointy things or sharp curves. At least the tube is made of clear PVC, actually tinted light blue, so I will be able to see if there is any arcing.

I really hate the idea of using oil because its so messy but I don't see any alternative if I want something that is reasonably compact, portable, and not terribly lossy. I thought about using paraffin wax instead of oil but then it would be practically unservicable and I wouldn't be able to see anything.
« Last Edit: December 14, 2019, 09:35:16 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline johnf

  • High Voltage Technician
  • ***
  • Posts: 192
  • Karma: +6/-0
    • View Profile
Re: Mineral oil breakdown voltage
« Reply #3 on: December 14, 2019, 09:07:42 PM »
I would use Shell Diala oil
It is very cheap new about US$1.00 per litre
or US$0.60 for rerefined

* Shell_Diala_OilHandbook_e.pdf

Offline MRMILSTAR

  • High Voltage Senior
  • *****
  • Posts: 561
  • Karma: +20/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Mineral oil breakdown voltage
« Reply #4 on: December 14, 2019, 09:12:47 PM »
I would use Shell Diala oil
It is very cheap new about US$1.00 per litre
or US$0.60 for rerefined

* Shell_Diala_OilHandbook_e.pdf

Do you know if it is compatible with PVC? Where do you get it? I found a 55 gallon drum on E-Bay for about $1000. That's a little more than I need and little more than I want to pay.  :D
« Last Edit: December 14, 2019, 10:51:27 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline johnf

  • High Voltage Technician
  • ***
  • Posts: 192
  • Karma: +6/-0
    • View Profile
Re: Mineral oil breakdown voltage
« Reply #5 on: December 14, 2019, 09:23:27 PM »
That price is outrageous
you could probably get it for free from a scrap yard that deal with electricity supply equipment transformers circuit breakers etc
But here in NZ I have bought it recently hence I know the price from our local re-refiner who also tests new oil drums for the local electrical supply aurthority.
My need was to repair the HV tasnk on a SEM where the diodes had gone short so I decided to replace the oil while I had the thing apart

Offline klugesmith

  • High Voltage Senior
  • *****
  • Posts: 706
  • Karma: +22/-0
    • View Profile
Re: Mineral oil breakdown voltage
« Reply #6 on: December 15, 2019, 01:14:06 AM »
Let us know what you find, Steve.

I have 1 gallon of Diala Ax that was given to me years ago.
By a generous online forum member named Carl Pugh, in the next county, who had procured a whole 5 gallon pail for his HV transformer project.

Lots of people sell hard-to-get materials online at ridiculously high prices.
I just encountered that while looking for some sodium.  More than a dollar per gram in small quantities. $90 for a pound shipped from India. 
Huh?  On a volume basis, in industrial quantities, sodium is the cheapest metal on the planet.  Barely half the price of new steel or aluminum, for example.
« Last Edit: December 15, 2019, 01:23:08 AM by klugesmith »

Offline davekni

  • Executive Board Member
  • *******
  • Posts: 2797
  • Karma: +133/-1
  • Physicist, engineer (electronic), and hobbiest
    • View Profile
Re: Mineral oil breakdown voltage
« Reply #7 on: December 16, 2019, 04:35:09 AM »
Steve,

Have you considered air insulation?  With careful layout, I think that could be possible.  The diode sets would need some local insulation, such as the adhesive-lined heat-shrink tubing over each string of three diodes.  Their cases tend to be too short to handle full voltage without additional insulation.  The door-knob capacitors should be able to handle the voltage as long as their surfaces are clean and dry.  At least they have in the bit of playing I've done.

If normal 100kPa air isn't quite sufficient, how about making your container air-tight, and pressurizing it to say 300kPa absolute (200kPa gauge if you are close to sea-level)?  Or, if you can find some, fill it with SF6.  Either option would provide about 3x breakdown voltage compared to atmospheric pressure (100kPa) air.

If you do go with mineral oil, it's going to be much higher dielectric breakdown strength than air.  I doubt you need to be concerned about the exact voltage for any specific oil.
David Knierim

High Voltage Forum

Re: Mineral oil breakdown voltage
« Reply #7 on: December 16, 2019, 04:35:09 AM »

 


* Recent Topics and Posts

post Re: RDRSSTC - Project Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
ZakW
Today at 01:55:42 AM
post Re: What capacitor configuration to explode foil?
[Capacitor Banks]
klugesmith
May 17, 2024, 11:49:33 PM
post Re: Pulse Power High Current Discharges from 3 Phase PFC Capacitors
[Capacitor Banks]
MRMILSTAR
May 17, 2024, 10:18:46 PM
post Pulse Power High Current Discharges from 3 Phase PFC Capacitors
[Capacitor Banks]
Mads Barnkob
May 17, 2024, 07:24:22 PM
post Re: What capacitor configuration to explode foil?
[Capacitor Banks]
Mads Barnkob
May 17, 2024, 07:14:35 PM
post Re: Help an EE student
[General Chat]
Mads Barnkob
May 17, 2024, 08:35:38 AM
post Re: Help an EE student
[General Chat]
MRMILSTAR
May 17, 2024, 05:34:10 AM
post Re: colored 50 Ohm coax
[General Chat]
Da_Stier
May 16, 2024, 10:53:53 PM
post Re: Help an EE student
[General Chat]
Michelle_
May 16, 2024, 10:37:50 PM
post Re: Help an EE student
[General Chat]
davekni
May 16, 2024, 10:29:30 PM
post Re: Help an EE student
[General Chat]
klugesmith
May 16, 2024, 08:26:41 PM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
davekni
May 16, 2024, 06:54:05 PM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
NyaaX_X
May 16, 2024, 05:04:41 PM
post Re: Tesla Synth Player for Syntherrupter
[Computers, Microcontrollers, Programmable Logic, Interfaces and Displays]
AntoineRcbs
May 16, 2024, 12:13:47 PM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
Domo
May 16, 2024, 06:58:12 AM
post Re: New EE student asks about Cutting-Edge fields
[General Chat]
davekni
May 16, 2024, 06:47:09 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
NyaaX_X
May 16, 2024, 06:00:49 AM
post Re: New EE student asks about Cutting-Edge fields
[General Chat]
Twospoons
May 16, 2024, 05:45:08 AM
post Re: New EE student asks about Cutting-Edge fields
[General Chat]
davekni
May 16, 2024, 05:03:41 AM
post Re: DRSSTC grounding issues
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
May 16, 2024, 04:58:40 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
davekni
May 16, 2024, 04:36:40 AM
post Re: colored 50 Ohm coax
[General Chat]
klugesmith
May 16, 2024, 12:28:27 AM
post Re: Watercooling
[Dual Resonant Solid State Tesla coils (DRSSTC)]
acobaugh
May 15, 2024, 11:13:48 PM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
klugesmith
May 15, 2024, 10:58:05 PM
post colored 50 Ohm coax
[General Chat]
Da_Stier
May 15, 2024, 08:31:48 PM
post Re: DRSSTC grounding issues
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
May 15, 2024, 07:56:38 PM
post Re: DRSSTC grounding issues
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 15, 2024, 06:29:59 PM
post Re: Watercooling
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Felix B.
May 15, 2024, 04:04:14 PM
post Re: Schmitt trigger schematic question
[Electronic Circuits]
Michelle_
May 15, 2024, 03:32:57 PM
post DRSSTC grounding issues
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Felix B.
May 15, 2024, 03:07:39 PM
post New EE student asks about Cutting-Edge fields
[General Chat]
samsonwilliams
May 15, 2024, 05:50:59 AM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
Domo
May 15, 2024, 05:38:14 AM
post Re: Schmitt trigger schematic question
[Electronic Circuits]
Benjamin Lockhart
May 15, 2024, 04:58:02 AM
post Re: Big Coil Build Log
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 15, 2024, 04:34:49 AM
post Re: Watercooling
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 15, 2024, 04:30:18 AM
post Re: Watercooling
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
May 15, 2024, 04:00:55 AM
post Re: Watercooling
[Dual Resonant Solid State Tesla coils (DRSSTC)]
flyingperson23
May 15, 2024, 03:21:51 AM
post Re: Schmitt trigger schematic question
[Electronic Circuits]
Michelle_
May 14, 2024, 11:12:22 PM
post Re: Schmitt trigger schematic question
[Electronic Circuits]
Benjamin Lockhart
May 14, 2024, 11:00:00 PM
post Schmitt trigger schematic question
[Electronic Circuits]
Michelle_
May 14, 2024, 09:45:38 PM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
klugesmith
May 14, 2024, 09:02:28 PM
post Re: Small-ish 3D printed SGTC via cheap ZVS flyback build, humbly asking a couple ?s
[Spark Gap Tesla Coils (SGTC)]
Michelle_
May 14, 2024, 05:55:24 AM
post Re: Weird AC/DC mini SSTC build review
[Solid State Tesla Coils (SSTC)]
Michelle_
May 14, 2024, 05:44:12 AM
post Re: Small-ish 3D printed SGTC via cheap ZVS flyback build, humbly asking a couple ?s
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
May 14, 2024, 05:11:54 AM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
alan sailer
May 13, 2024, 11:44:56 PM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
Domo
May 13, 2024, 10:28:34 PM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
alan sailer
May 13, 2024, 10:20:19 PM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
Domo
May 13, 2024, 09:27:58 PM
post Re: Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
alan sailer
May 13, 2024, 09:06:59 PM
post Help with primary voltages of unknown transformer
[Transformer (Ferrite Core)]
Domo
May 13, 2024, 08:43:49 PM
post Re: Benjamin's DRSSTC 2 in progress
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Benjamin Lockhart
May 13, 2024, 07:25:29 PM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
OmGigaTron
May 13, 2024, 06:50:59 PM
post Re: Weird AC/DC mini SSTC build review
[Solid State Tesla Coils (SSTC)]
Michelle_
May 13, 2024, 03:47:08 PM
post Re: Small-ish 3D printed SGTC via cheap ZVS flyback build, humbly asking a couple ?s
[Spark Gap Tesla Coils (SGTC)]
Michelle_
May 13, 2024, 03:42:58 PM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
NyaaX_X
May 13, 2024, 07:09:16 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
davekni
May 13, 2024, 05:02:46 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
NyaaX_X
May 13, 2024, 02:25:25 AM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
May 13, 2024, 01:39:11 AM
post Re: Plasma Toroid
[Solid State Tesla Coils (SSTC)]
alan sailer
May 13, 2024, 01:33:21 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
davekni
May 12, 2024, 10:56:53 PM
post Re: Quick question about steve ward mini SST5 resonant frequency
[Solid State Tesla Coils (SSTC)]
NyaaX_X
May 12, 2024, 05:10:40 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
Michelle_
May 12, 2024, 04:24:44 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
alan sailer
May 12, 2024, 04:10:54 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
Michelle_
May 12, 2024, 04:04:11 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
hal7rr
May 12, 2024, 03:56:57 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
Michelle_
May 12, 2024, 03:46:45 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
hal7rr
May 12, 2024, 02:59:16 PM
post Re: Quick question about steve ward mini SST5 resonant frequency
[Solid State Tesla Coils (SSTC)]
Michelle_
May 12, 2024, 02:51:27 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
Michelle_
May 12, 2024, 02:49:42 PM
post Re: Quick question about steve ward mini SST5 resonant frequency
[Solid State Tesla Coils (SSTC)]
ZakW
May 12, 2024, 08:34:39 AM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
ZakW
May 12, 2024, 08:30:29 AM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
Michelle_
May 12, 2024, 02:35:17 AM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
alan sailer
May 12, 2024, 02:07:32 AM
post Re: Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
Michelle_
May 11, 2024, 09:55:59 PM
post Re: Help with LabCoatz's Staccato QCW DRSSTC
[Beginners]
NyaaX_X
May 11, 2024, 06:16:22 PM
post Help with LabCoatz's Staccato QCW DRSSTC Tesla Coil
[Beginners]
hal7rr
May 11, 2024, 05:24:34 PM
post Re: Type 77 Metglas Laced Ferrite Core
[General Chat]
NyaaX_X
May 11, 2024, 10:39:24 AM
post Re: Type 77 Metglas Laced Ferrite Core
[General Chat]
Mads Barnkob
May 11, 2024, 07:02:20 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
NyaaX_X
May 11, 2024, 06:40:50 AM
post Type 77 Metglas Laced Ferrite Core
[General Chat]
paulp1776
May 11, 2024, 06:23:59 AM
post Re: Weird AC/DC mini SSTC build review
[Solid State Tesla Coils (SSTC)]
Michelle_
May 11, 2024, 05:27:22 AM
post Re: Quick question about steve ward mini SST5 resonant frequency
[Solid State Tesla Coils (SSTC)]
alan sailer
May 11, 2024, 01:37:37 AM
post Re: designing and building electron gun help!
[General Chat]
Twospoons
May 11, 2024, 12:10:44 AM
post designing and building electron gun help!
[General Chat]
Luca c.
May 10, 2024, 09:38:05 PM
post Re: Quick question about steve ward mini SST5 resonant frequency
[Solid State Tesla Coils (SSTC)]
Michelle_
May 10, 2024, 09:24:21 PM
post Re: Quick question about steve ward mini SST5 resonant frequency
[Solid State Tesla Coils (SSTC)]
alan sailer
May 10, 2024, 08:43:11 PM
post Quick question about steve ward mini SST5 resonant frequency
[Solid State Tesla Coils (SSTC)]
Michelle_
May 10, 2024, 08:33:47 PM
post Weird AC/DC mini SSTC build review
[Solid State Tesla Coils (SSTC)]
Michelle_
May 10, 2024, 05:34:15 AM
post Re: Question about using mains power and variacs to power this circuit
[Beginners]
Michelle_
May 10, 2024, 05:08:38 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
Twospoons
May 10, 2024, 03:02:13 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
davekni
May 10, 2024, 01:39:53 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
Twospoons
May 10, 2024, 12:06:50 AM
post Re: Question about using mains power and variacs to power this circuit
[Beginners]
klugesmith
May 09, 2024, 07:10:19 PM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
klugesmith
May 09, 2024, 06:59:22 PM
post Re: Question about using mains power and variacs to power this circuit
[Beginners]
Michelle_
May 09, 2024, 03:42:49 PM
post Re: Question about using mains power and variacs to power this circuit
[Beginners]
Michelle_
May 09, 2024, 03:06:19 PM
post Re: Question about using mains power and variacs to power this circuit
[Beginners]
Mads Barnkob
May 09, 2024, 01:05:26 PM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
NyaaX_X
May 09, 2024, 09:15:24 AM
post Re: Plasma Torid - Class E Self Resonant Dual/Stereo - Plasma Torid Build
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Lasr8
May 09, 2024, 04:45:33 AM
post Re: Aluminum electrolytic capacitor ripple current issue
[Beginners]
davekni
May 09, 2024, 03:56:52 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal