Author Topic: Blast from the past!  (Read 1388 times)

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 308
  • Karma: +8/-0
  • Cedar Rapids, Iowa
    • View Profile
Blast from the past!
« on: September 17, 2019, 05:52:00 PM »
Here's a blast from the past. I've had this for a while. Anyone under the age of 50 may not recognize this. Before there was semiconductor RAM for memory, this is what computers used for fast working memory. This is called core storage. Each bit is stored in a tiny ferrite loop as a magnetic state. The ferrite loops are tiny, about 2 mm in diameter. These boards were assembled completely by hand!

Each loop has 3 wires passing through it for reading and writing data. The act of reading a bit actually erased it so the bit had to be re-writtten after reading! One advantage of core memory was that it was non-volatile.

This particular board contains 1600 ferrite loops thus it could store 1600 bits (200 bytes). It came from an IBM computer system. Not shown is the electronic drive and sense circuitry, made from discrete components, for reading and writing.
« Last Edit: September 17, 2019, 08:53:46 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1783
  • Karma: +46/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Blast from the past!
« Reply #1 on: September 17, 2019, 06:53:52 PM »
I assume you have this at home, do you know what computer it came from and do you have any other related parts?

Core memory history is really interesting as it was a leap in computation speed due to faster access times to data and just the shear power consumption reduction durings development shows a will to make it cheaper, smaller and more usable in all kinds of machines besides large main frames. https://en.wikipedia.org/wiki/Magnetic-core_memory
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 308
  • Karma: +8/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: Blast from the past!
« Reply #2 on: September 17, 2019, 08:19:45 PM »
I do have it. My understanding is that it was used in the IBM 2821 control unit which was used to interface various peripherals to an IBM 360/370 computer. I don't have any other related parts. I would love to have a complete core memory module cube but they are very expensive. I would also love to have an IBM 360/370 control panel, but again, very rare and expensive.

My first computer was an Altair 8800 which I built from a kit in 1976. It was the very first personal computer. I sold it in the early 1980s for almost nothing. I wish that I still had it.
« Last Edit: September 17, 2019, 08:56:06 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline klugesmith

  • High Voltage Engineer
  • ****
  • Posts: 378
  • Karma: +12/-0
    • View Profile
Re: Blast from the past!
« Reply #3 on: September 18, 2019, 05:05:55 AM »
Very cool!  Let's see if I can find my own old core memory unit.

There are some modern core memory demonstrators that really work.  I wonder if their cores are old stock, made of material designed for data storage.  First hit of my search was corememoryshield.com.

Offline Hydron

  • Administrator
  • High Voltage Engineer
  • *****
  • Posts: 407
  • Karma: +14/-0
    • View Profile
Re: Blast from the past!
« Reply #4 on: September 20, 2019, 11:32:35 PM »
On the topic of old computers and core memory, I have really enjoyed following this youtube channel, especially the restoration of the Apollo AGC computer:
https://www.youtube.com/channel/UC3bosUr3WlKYm4sBaLs-Adw

High Voltage Forum

Re: Blast from the past!
« Reply #4 on: September 20, 2019, 11:32:35 PM »

 


* Recent Topics and Posts

post Re: Tesla Coil Show Controller Project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Max
Today at 11:13:18 AM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Weston
Today at 10:08:34 AM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 03:20:42 AM
post Re: repair of Panasonic microwave inverter
[Electronic Circuits]
Twospoons
Today at 03:16:27 AM
post 3kW Cisco Server Supply teardown and help needed
[Electronic Circuits]
Da_Stier
July 23, 2021, 09:23:11 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 23, 2021, 08:05:58 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
futurist
July 23, 2021, 07:02:18 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 23, 2021, 05:33:57 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 23, 2021, 04:51:37 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 23, 2021, 03:52:46 AM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 22, 2021, 10:59:32 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 22, 2021, 08:50:34 PM
post Re: IGBT question
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 22, 2021, 08:47:23 PM
post Help needed - which IGBT module to buy
[Dual Resonant Solid State Tesla coils (DRSSTC)]
thedoc298
July 22, 2021, 07:01:24 PM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 22, 2021, 06:50:07 AM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 22, 2021, 06:39:37 AM
post Re: Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
July 21, 2021, 07:55:03 PM
post Horrible waveforms advice--just bad test setup?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
GKnapp
July 21, 2021, 06:34:13 PM
post Re: Global shutter synchronized to arcs?
[DSLR]
Uspring
July 21, 2021, 05:10:18 PM
post Re: Tesla Coil Show Controller Project
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 21, 2021, 12:42:29 PM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 21, 2021, 08:15:00 AM
post Re: Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
July 21, 2021, 04:57:04 AM
post Re: Micro-power continuity checker.
[Electronic Circuits]
davekni
July 21, 2021, 03:50:33 AM
post Re: Skm flyback destroyer 🤗
[Transformer (Ferrite Core)]
oneKone
July 21, 2021, 01:50:19 AM
post Proper phase lead adjustment at the input
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Chrisader
July 20, 2021, 10:06:14 PM
post Re: Micro-power continuity checker.
[Electronic Circuits]
klugesmith
July 20, 2021, 06:24:29 PM
post Micro-power continuity checker.
[Electronic Circuits]
davekni
July 20, 2021, 05:37:36 AM
post Re: Help needed with SSTC. First TC build
[Solid State Tesla Coils (SSTC)]
davekni
July 20, 2021, 05:08:24 AM
post Re: Global shutter synchronized to arcs?
[DSLR]
davekni
July 20, 2021, 04:43:05 AM
post Re: Global shutter synchronized to arcs?
[DSLR]
TMaxElectronics
July 20, 2021, 12:09:36 AM
post Re: Help needed with SSTC. First TC build
[Solid State Tesla Coils (SSTC)]
AstRii
July 19, 2021, 11:13:13 PM
post Another question on CT Feedback
[Solid State Tesla Coils (SSTC)]
Maverikie
July 19, 2021, 08:56:04 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
newage
July 19, 2021, 07:09:56 PM
post Re: Global shutter synchronized to arcs?
[DSLR]
klugesmith
July 19, 2021, 06:49:08 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
klugesmith
July 19, 2021, 04:39:05 PM
post Global shutter synchronized to arcs?
[DSLR]
davekni
July 19, 2021, 06:32:35 AM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
July 19, 2021, 05:22:51 AM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
newage
July 19, 2021, 04:24:38 AM
post Re: a typical sstc half bridge design, any considerations or tips?
[Solid State Tesla Coils (SSTC)]
eli
July 19, 2021, 12:35:18 AM
post Re: a typical sstc half bridge design, any considerations or tips?
[Solid State Tesla Coils (SSTC)]
Mads Barnkob
July 19, 2021, 12:15:43 AM
post a typical sstc half bridge design, any considerations or tips?
[Solid State Tesla Coils (SSTC)]
eli
July 18, 2021, 11:44:03 PM
post Re: HFSSTC design help and questions
[Solid State Tesla Coils (SSTC)]
eli
July 18, 2021, 09:33:40 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
johnf
July 18, 2021, 09:07:15 PM
post Re: Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
MRMILSTAR
July 18, 2021, 03:38:01 PM
post Best and stable version of video
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Transgarp
July 18, 2021, 03:33:31 PM
post Sync RSG motor problems - help and thoughts needed
[Spark Gap Tesla Coils (SGTC)]
newage
July 18, 2021, 01:30:46 PM
post Re: DRSSTC design advise / Primary peak current calculation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 17, 2021, 10:05:39 AM
post Re: DRSSTC design advise / Primary peak current calculation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
July 16, 2021, 11:01:43 PM
post Re: DRSSTC design advise / Primary peak current calculation
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Martin
July 16, 2021, 09:55:50 AM
post Re: Skm flyback destroyer 🤗
[Transformer (Ferrite Core)]
Patrick
July 16, 2021, 09:54:50 AM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal