Author Topic: Prototype boards  (Read 538 times)

Offline Da_Stier

  • High Voltage Technician
  • ***
  • Posts: 123
  • Karma: +8/-0
    • View Profile
Prototype boards
« on: May 02, 2021, 04:27:33 PM »
Hi,

since a lot of prototype and Perfboards are pretty expensive (atleast in my opinion) and pretty bad quality, I decided to make my own a long time ago.
I figured, that some of them might be intersting for some of you as well.

Feel free, to get some made for yourself, but please don't sell them to make profit.


1: A 100x160mm throughole card (Eurokarte).
It has a guardring with via stitching all around, has .1inch pitch and all holes are plated througholes.
The mounting holes are 3.5mm for M3.



* Eurokarte-Lochraster_Gerber.zip



2: Smaller throughole cards on a 100x160mm panel.



* Lochraster_v_score_Gerber.zip



3: A SMD protoype board. The board is made for 0805 and 0603 components.
the size of the board is 50x100mm.
The sqares are 2mm by 2mm and have a .1inch pitch.
They work very well for combined SMD and throughhole prototypes.
The gerbers have two of them combined into a 100x100mm panel.





* SMD-Gerber-double.zip



4: some 50Ohm coplanar waveguide strips.
I use them in RF prototypes. They work well for making filters.
They are measured up to 3GHz on a HP8753 VNA and work well in this range.
The panel contains 12 100mm strips.





* coplanar-Gerber-panel.zip



5: some SOIC8 breakouts.
They have an exposed pad and a GND plane on the back.
The panel includes 45 pieces.





* SOIC8-Gerber-panel.zip



Each of these boards has been ordered from JLC and Elecrow without any issues.
I like the ENIG finish but they work with any finish of course.

I hope some of you can use some of them. :)



Greetings,
Michael

Offline TMaxElectronics

  • High Voltage Engineer
  • ****
  • Posts: 202
  • Karma: +11/-0
    • View Profile
    • My random (and very empty) electronics blog
Re: Prototype boards
« Reply #1 on: May 02, 2021, 07:37:08 PM »
Thanks for sharing :)  I'll definitely order a whole bunch of every version, they look good.

It might be interesting to add not-plated holes between the pads of the SMD version. Then it would be easy to get a good ground even in the middle of a circuit.

Offline Da_Stier

  • High Voltage Technician
  • ***
  • Posts: 123
  • Karma: +8/-0
    • View Profile
Re: Prototype boards
« Reply #2 on: May 02, 2021, 09:15:02 PM »
Thanks, great you like them.  :)

That is actually a pretty good idea.
I didn't have any grounding issues yet but why not.

So here is a version of the SMD prototyping board with 1mm non plated holes between all the pads.
Of course I don't have a photo of one so the 3D preview must be enough.  ;)



* SMD-holes-Gerber-double.zip






Greetings,
Michael

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1793
  • Karma: +46/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: Prototype boards
« Reply #3 on: May 02, 2021, 09:20:23 PM »
Thanks for sharing these great prototyping PCB designs!

I will also add them on my next PCB order :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline Da_Stier

  • High Voltage Technician
  • ***
  • Posts: 123
  • Karma: +8/-0
    • View Profile
Re: Prototype boards
« Reply #4 on: June 02, 2021, 09:36:52 PM »
Hi all,

I finished some more designs.
I didn't order them yet, but they process just fine.
All the breakouts fall into the < 100x100mm standard size of most manufacturers.
All the breakouts have a solid GND plane on the back.


SOIC 14 breakouts with exposed pad:

* SOIC14-gerber-panel.zip




SOIC 14W breakouts with exposed pad:

* SOIC14W-gerber-panel.zip




SOIC 16 breakouts with exposed pad:

* SOIC16-panel.zip




SOIC 18W breakouts with exposed pad:

* SOIC18W-gerber-panel.zip




SOIC 28W breakouts with exposed pad:

* SOIC28W-gerber-panel.zip





Greetings,
Michael

Offline Da_Stier

  • High Voltage Technician
  • ***
  • Posts: 123
  • Karma: +8/-0
    • View Profile
Re: Prototype boards
« Reply #5 on: June 02, 2021, 10:52:57 PM »
Hi all,

I have one last batch of boards to add.


The first one is a simple 100x160mm .1inch pitch through hole card.
It is good if you want to cut it into small pieces or custom shapes since it uses the area the best.

* Eurokarte-simple-gerber-single.zip




The second one is a mashup of the first 100x160mm through hole card and the SMD board.
It is 100x160mm in size, has 3.5mm mounting holes and a via stiched guard ring.
The bottom is filled with a GND layer.
Each "half" of the board has a voltage rail for power distribution.
The SMD pads are the same 2mm square .1inch pitch pads as on the other SMD board.

The weird SMD pads in the picture are just a visual bug of the preview !!

* Eurokarte-SMD-gerber-single.zip





Greetings,
Michael

High Voltage Forum

Re: Prototype boards
« Reply #5 on: June 02, 2021, 10:52:57 PM »

 


* Recent Topics and Posts

post Re: Capacitor testing
[Voltage Multipliers]
johnf
Today at 09:33:01 AM
post Re: UD2.7 GDT problem
[Dual Resonant Solid State Tesla coils (DRSSTC)]
endi007
Today at 08:46:23 AM
post Re: UD2.7 GDT problem
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
Today at 08:10:02 AM
post Re: CT current phase leading by 60°
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
Today at 08:03:04 AM
post Re: UD2.7 GDT problem
[Dual Resonant Solid State Tesla coils (DRSSTC)]
endi007
Today at 07:41:29 AM
post Re: Capacitor testing
[Voltage Multipliers]
MRMILSTAR
Today at 05:42:57 AM
post Capacitor testing
[Voltage Multipliers]
abstruse1
Today at 05:02:21 AM
post CT current phase leading by 60°
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Karl Fischer
August 04, 2021, 11:46:10 PM
post IGBT Desaturation Detector
[Electronic Circuits]
TMaxElectronics
August 04, 2021, 06:03:32 PM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
johnnyzoo
August 04, 2021, 11:03:33 AM
post UD2.7 GDT problem
[Dual Resonant Solid State Tesla coils (DRSSTC)]
endi007
August 04, 2021, 09:18:03 AM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
August 03, 2021, 08:59:22 PM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
MrScrOggs
August 03, 2021, 06:41:57 PM
post Re: Flyback secondary burnout
[Voltage Multipliers]
johnnyzoo
August 03, 2021, 06:31:34 PM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
johnnyzoo
August 03, 2021, 06:16:50 PM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
MrScrOggs
August 03, 2021, 04:29:02 PM
post Motorcycle Music
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Transgarp
August 03, 2021, 01:50:26 PM
post Re: Up to 9 half-bridges of FS35R12 IGBTs in parallel, per board...
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Da_Stier
August 03, 2021, 10:35:58 AM
post Re: Up to 9 half-bridges of FS35R12 IGBTs in parallel, per board...
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
August 03, 2021, 07:55:07 AM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
August 02, 2021, 10:40:00 PM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
Mads Barnkob
August 02, 2021, 09:06:52 PM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
SalinsLV
August 02, 2021, 08:34:06 PM
post Flyback secondary burnout
[Voltage Multipliers]
abstruse1
August 02, 2021, 05:47:02 PM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
Mads Barnkob
August 02, 2021, 08:07:25 AM
post Re: VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
August 02, 2021, 05:44:35 AM
post VTTC Arcs From Feedback Coil
[Vacuum Tube Tesla Coils (VTTC)]
MrScrOggs
August 01, 2021, 09:16:20 PM
post Re: UD2.7C and news coil 150khz 70cm
[Dual Resonant Solid State Tesla coils (DRSSTC)]
JCF
August 01, 2021, 03:57:42 PM
post Re: UD2.7C and news coil 150khz
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Hydron
August 01, 2021, 02:10:03 PM
post UD2.7C and news coil 150khz 70cm
[Dual Resonant Solid State Tesla coils (DRSSTC)]
JCF
August 01, 2021, 12:06:46 PM
post Re: Teardown of Kathrein 1800/900 MHz Antenna For Mobile Phone Base Station
[Radio Frequency]
Da_Stier
July 31, 2021, 09:23:10 PM
post Re: Teardown of Kathrein 1800/900 MHz Antenna For Mobile Phone Base Station
[Radio Frequency]
Mads Barnkob
July 31, 2021, 08:52:44 PM
post Re: Teardown of Kathrein 1800/900 MHz Antenna For Mobile Phone Base Station
[Radio Frequency]
Da_Stier
July 31, 2021, 01:23:07 PM
post Re: CW Help -- too much info to digest
[Voltage Multipliers]
abstruse1
July 31, 2021, 03:15:04 AM
post Re: What is BPS?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Felix B.
July 30, 2021, 11:53:25 PM
post Re: Teardown of Kathrein 1800/900 MHz Antenna For Mobile Phone Base Station
[Radio Frequency]
Da_Stier
July 30, 2021, 09:11:33 PM
post Re: What is BPS?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Mads Barnkob
July 30, 2021, 08:16:05 PM
post Re: My X-Ray Machine
[X-ray]
neukyhm
July 30, 2021, 06:42:54 PM
post Teardown of Kathrein 1800/900 MHz Antenna For Mobile Phone Base Station
[Radio Frequency]
Mads Barnkob
July 30, 2021, 02:42:24 PM
post Re: Toslink eagle library (FCR6842031R)
[Printed Circuit Board]
Da_Stier
July 30, 2021, 11:44:23 AM
post Re: What is BPS?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
PEDRO HENRIQUE
July 30, 2021, 06:16:06 AM
post Re: CW Help -- too much info to digest
[Voltage Multipliers]
davekni
July 30, 2021, 04:57:44 AM
post Re: Need second opinion on tesla coil capacitors
[Spark Gap Tesla Coils (SGTC)]
davekni
July 30, 2021, 04:45:12 AM
post Re: CW Help -- too much info to digest
[Voltage Multipliers]
abstruse1
July 30, 2021, 03:37:44 AM
post Re: Toslink eagle library (FCR6842031R)
[Printed Circuit Board]
Twospoons
July 30, 2021, 12:08:11 AM
post Toslink eagle library (FCR6842031R)
[Printed Circuit Board]
br0
July 29, 2021, 09:35:45 PM
post Re: CW Help -- too much info to digest
[Voltage Multipliers]
MRMILSTAR
July 29, 2021, 05:16:39 AM
post Re: CW Help -- too much info to digest
[Voltage Multipliers]
abstruse1
July 29, 2021, 03:38:23 AM
post Re: Grounding VTTC
[Vacuum Tube Tesla Coils (VTTC)]
MRMILSTAR
July 28, 2021, 08:31:50 PM
post Re: Grounding VTTC
[Vacuum Tube Tesla Coils (VTTC)]
SalinsLV
July 28, 2021, 08:07:10 PM
post Re: Tesla Coil Music
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Max
July 28, 2021, 05:17:06 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal