Author Topic: My new x-ray transformer  (Read 2332 times)

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
My new x-ray transformer
« on: April 14, 2020, 03:41:39 PM »
Hello!

Introducing my new toy, I recently managed to buy a high-voltage transformer for an industrial X-ray machine and the associated control panel.
The high voltage transformer can supply voltages between 70-200kV, up to 10mA.
It's still on the way for now, I ordered it, but I'll add more detailed photos, and I also have an X-ray tube that I can operate in this way.








Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #1 on: April 20, 2020, 10:37:20 AM »
Hello!

This week the courier will bring the things shown in the picture, my question would be the silicone oil recommended for the high voltage transformer, what are your thoughts on it? Or should I stay with the transformer oil? I know I'll have to vacuum the transformer

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1738
  • Karma: +42/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: My new x-ray transformer
« Reply #2 on: April 21, 2020, 07:58:42 AM »
Nice control panel, it looks exactly like the system I got recently. There is some years between the systems and yours is older, but generally it is the same knobs/meters to control it:
/>
Did you get more parts with the transformer? It looks like high voltage diodes and voltage multipliers are missing? Or are those pancake coils really specified up to 200 kV?

The 4 wires coming from the transformers must be each their set of primary windings for the inverter. That dual midpoint grounded high voltage transformer i common in the x-ray generators, like the large siemens x-ray head I took apart here. I still have the transformers and output voltage multiplier if you are interested in buying that. I think it was something like 1000 Hz pulsed, I seem to recall that I talk about that in the control panel video of that system.
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #3 on: April 21, 2020, 08:42:57 AM »
Hello!  This is a 50Hz X-ray, the tube went with alternating current, in half wave.  That’s the high voltage transformer, their primary coils are connected in parallel, controlled by a variac  that is in the control unit.  There are no multipliers, the transformer is almost 20kg, it could deliver 200kV.



Before the owner disassembled
« Last Edit: April 21, 2020, 08:47:31 AM by AlexanderHun »

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #4 on: April 23, 2020, 12:30:23 PM »
Hi!
The package has arrived, I think I managed to order something huge again. I attach pictures, there is even an X-ray image intensifier included in the package if you are interested in someone doing pictures! This transformer is so big that I'm afraid to install it ....








Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 281
  • Karma: +8/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: My new x-ray transformer
« Reply #5 on: April 23, 2020, 03:26:53 PM »
"Big" is a relative term. Compared to my 10 KVA 300-pound pole transformer, your X-Ray transformer doesn't look that big.  :)
« Last Edit: April 23, 2020, 03:28:56 PM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline John123

  • High Voltage Engineer
  • ****
  • Posts: 227
  • Karma: +4/-0
  • All the gear, no idea. UK
    • View Profile
Re: My new x-ray transformer
« Reply #6 on: April 24, 2020, 04:31:52 AM »
Does that need to go into oil?

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #7 on: April 24, 2020, 06:39:23 AM »
Hi, yes, in oil, or in silicone oil.  The latter was suggested to be better than transformer oil, I have no experience with it.

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #8 on: April 24, 2020, 05:33:50 PM »
Test, so far without HV transformer, took two days before I found all pins (pinout).



Offline klugesmith

  • High Voltage Engineer
  • ****
  • Posts: 370
  • Karma: +11/-0
    • View Profile
Re: My new x-ray transformer
« Reply #9 on: April 24, 2020, 11:39:01 PM »
WHat a nice acquisition!

Regarding oil immersion of x-ray transformers, especially those working at 50 Hz or 60 Hz (so secondary winding have many many turns of very fine wire).

My unpracticed understanding is that not only does oil potting depend on using a vacuum,
you are supposed to apply the vacuum before the oil.  The tanks are strong enough to withstand full vacuum.
It's in the rules when you read about installing or servicing pad-mounted utility transformers.

Suppose you dunk a transformer into a tank mostly full of oil, and the secondary coils carry a few tiny air bubbles in with them.
If you then pull a vacuum, even perfect vacuum above the oil, the absolute pressure at the air bubbles can't get lower than about 10 torr.  An exception is permitted if you turn off Earth gravity during the procedure.

Air bubbles will temporarily expand by a factor of 4 or 5, but that doesn't guarantee that they will escape and float to the surface.
On another forum there have been plenty of reports of re-potted XRT's being destroyed by internal arcing, under the oil.  I saw one posted a few weeks ago.

Maybe most people are more lucky.  Reminds me of teenagers handling latex balloons filled with oxygen and acetylene, to make controlled  bangs, in the pre-internet era.  If spontaneous explosions happened 10% of the time, the lucky 90% would tell their friends, who would copy the unwise procedure until somebody got hurt.
« Last Edit: April 25, 2020, 02:02:15 AM by klugesmith »

Offline MRMILSTAR

  • High Voltage Engineer
  • ****
  • Posts: 281
  • Karma: +8/-0
  • Cedar Rapids, Iowa
    • View Profile
Re: My new x-ray transformer
« Reply #10 on: April 25, 2020, 05:58:53 AM »

... Reminds me of teenagers handling latex balloons filled with oxygen and acetylene, to make controlled  bangs, in the pre-internet era.  If spontaneous explosions happened 10% of the time, the lucky 90% would tell their friends, who would copy the unwise procedure until somebody got hurt.

When I was a teenager we used to experiment with calcium carbide nuggets. One time I placed some in a bowl of water and then placed that inside of an empty extra-large-size Tide soap box which had a volume of about one cubic foot. I waited a few minutes for the acetylene to fill the box. I then brought a lighter near the open end of the box. That is the last thing that I remembered for several minutes. The explosion threw me back about 10 feet and stunned me for several minutes. My ears were ringing for about 30 minutes. Luckily I survived.  :)
« Last Edit: April 25, 2020, 06:08:53 AM by MRMILSTAR »
Steve White
Cedar Rapids, Iowa
Retired electrical engineer

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #11 on: April 25, 2020, 08:01:01 AM »
Hi, it will be filled with silicone oil, its properties are very good, it is water repellent, according to its data sheet its penetration is 14kV / mm, of course I vacuum it.

Offline DashApple

  • High Voltage Enthusiast
  • *
  • Posts: 19
  • Karma: +1/-0
    • View Profile
Re: My new x-ray transformer
« Reply #12 on: April 25, 2020, 11:23:22 AM »
Do you have a supplier for the silicone oil ? , Currently I use transformer grade mineral oil with my X ray transformers , but think changing over may be a better solution for longer life ?


When I vacuumed my small transformer , It took around 7 days straight and I used a small vibration module to help move the trapped air , Worked really well .

After the 7 days , No more air bubbles could be seen and i stopped the vacuum , Seems to work fine currently : )

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #13 on: April 25, 2020, 01:02:01 PM »
Hi, you can buy it in a webshop in Hungary.  It costs quite a lot, but it's worth it.

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #14 on: April 27, 2020, 06:14:54 PM »
I couldn't stand it, I tested the transformer a bit, I don't go up without oil, I ordered it already but it hasn't arrived yet.  ;D ;D

https://www.youtube.com/watch?v=YpRWmy82Zcg

Offline Mads Barnkob

  • Administrator
  • High Voltage Expert
  • *****
  • Posts: 1738
  • Karma: +42/-0
  • Denmark
    • View Profile
    • Kaizer Power Electronics
Re: My new x-ray transformer
« Reply #15 on: April 28, 2020, 09:37:01 AM »
Test, so far without HV transformer, took two days before I found all pins (pinout).

Could you please share the pictures of the plugs and their pinout? If I am lucky, then there is some kind of standard that will fit my unit :)
https://kaizerpowerelectronics.dk - Tesla coils, high voltage, pulse power, audio and general electronics
https://www.youtube.com/KaizerPowerElectronicsDk60/join - Please consider supporting the forum, websites and youtube channel!

Offline AlexanderHun

  • High Voltage Enthusiast
  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: My new x-ray transformer
« Reply #16 on: April 28, 2020, 09:45:55 AM »
Thanks for the help, these connectors are old Russian standards, I managed to find all pins.  I am currently focusing on the HV transformer.

High Voltage Forum

Re: My new x-ray transformer
« Reply #16 on: April 28, 2020, 09:45:55 AM »

 


* Recent Topics and Posts

post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
Today at 01:06:02 AM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
Today at 12:44:31 AM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
Today at 12:41:33 AM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
Today at 12:11:13 AM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 13, 2021, 11:52:11 PM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
June 13, 2021, 11:38:44 PM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
June 13, 2021, 10:26:51 PM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 13, 2021, 09:57:56 PM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
June 13, 2021, 09:29:08 PM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 13, 2021, 08:53:25 PM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
June 13, 2021, 07:22:05 PM
post Re: First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 13, 2021, 07:02:28 PM
post Re: HFSSTC with fixed crystal-controlled frequency
[Solid State Tesla Coils (SSTC)]
Steve Ward
June 13, 2021, 06:25:20 PM
post First middle sized DRSSTC - Phase lead tuning
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Rapy2
June 13, 2021, 02:48:59 PM
post OpenTheremin v3 loosing calibration after minutes
[Electronic Circuits]
gianpaolo
June 13, 2021, 12:00:09 PM
post Re: What is the guidence on SpaceX rockets based on ? PID's?
[General Chat]
Mads Barnkob
June 12, 2021, 07:28:03 PM
post Re: Rocket engine questions
[General Chat]
klugesmith
June 12, 2021, 07:23:12 PM
post Re: Rocket engine questions
[General Chat]
rikkitikkitavi
June 12, 2021, 12:24:06 PM
post Re: Nice PC Board Tesla
[Solid State Tesla Coils (SSTC)]
Da_Stier
June 12, 2021, 10:06:18 AM
post Re: Rocket engine questions
[General Chat]
plasma
June 12, 2021, 10:01:29 AM
post Re: Nice PC Board Tesla
[Solid State Tesla Coils (SSTC)]
Twospoons
June 12, 2021, 08:47:08 AM
post Re: What is the guidence on SpaceX rockets based on ? PID's?
[General Chat]
Patrick
June 12, 2021, 07:03:10 AM
post Re: Complications in the design of the first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
PEDRO HENRIQUE
June 12, 2021, 06:42:56 AM
post Re: Nice PC Board Tesla
[Solid State Tesla Coils (SSTC)]
davekni
June 12, 2021, 04:20:53 AM
post Re: SKM100 Mini DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Willsmith001
June 11, 2021, 11:08:24 PM
post Re: How much propagation delay is too much propagation delay
[General Chat]
Willsmith001
June 11, 2021, 11:07:00 PM
post Re: Nice PC Board Tesla
[Solid State Tesla Coils (SSTC)]
Da_Stier
June 11, 2021, 12:33:55 PM
post Re: Nice PC Board Tesla
[Solid State Tesla Coils (SSTC)]
futurist
June 11, 2021, 12:03:24 PM
post Re: How much propagation delay is too much propagation delay
[General Chat]
davekni
June 11, 2021, 06:47:52 AM
post Re: How much propagation delay is too much propagation delay
[General Chat]
Power-Max
June 11, 2021, 06:32:02 AM
post Re: How much propagation delay is too much propagation delay
[General Chat]
davekni
June 11, 2021, 05:16:03 AM
post Re: SKM100 Mini DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
davekni
June 11, 2021, 04:53:50 AM
post Re: Why are SGT50T65FD1PN soo cheap on lcsc?
[General Chat]
Hydron
June 10, 2021, 11:51:17 PM
post Re: Rocket engine questions
[General Chat]
MRMILSTAR
June 10, 2021, 09:52:59 PM
post Re: Rocket engine questions
[General Chat]
Patrick
June 10, 2021, 09:16:25 PM
post Re: Why are SGT50T65FD1PN soo cheap on lcsc?
[General Chat]
Weston
June 10, 2021, 08:19:40 PM
post Fujifilm PMT module PMT12A, reverse engineering
[Detection, Counting and Measurements]
Mads Barnkob
June 10, 2021, 08:05:27 PM
post Nice PC Board Tesla
[Solid State Tesla Coils (SSTC)]
alan sailer
June 10, 2021, 07:46:12 PM
post Re: Is it possible to go fully CW with a DRSSRC?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Uspring
June 10, 2021, 06:31:40 PM
post Re: Why are SGT50T65FD1PN soo cheap on lcsc?
[General Chat]
rikkitikkitavi
June 10, 2021, 02:12:07 PM
post Re: Help for people buying the "12-48 Volt 1800/2500 Watt ZVS induction Heater"
[Electronic Circuits]
T3sl4co1l
June 10, 2021, 05:14:41 AM
post How much propagation delay is too much propagation delay
[General Chat]
Power-Max
June 10, 2021, 05:10:24 AM
post Re: Why are SGT50T65FD1PN soo cheap on lcsc?
[General Chat]
Power-Max
June 10, 2021, 04:50:34 AM
post Re: SKM100 Mini DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
alan sailer
June 10, 2021, 01:36:31 AM
post Re: Why are SGT50T65FD1PN soo cheap on lcsc?
[General Chat]
Steve Ward
June 09, 2021, 09:15:22 PM
post Re: Is it possible to go fully CW with a DRSSRC?
[Dual Resonant Solid State Tesla coils (DRSSTC)]
Power-Max
June 09, 2021, 08:02:15 PM
post Re: Complications in the design of the first DRSSTC
[Dual Resonant Solid State Tesla coils (DRSSTC)]
PEDRO HENRIQUE
June 09, 2021, 07:17:27 PM
post Re: Analog HFBR amplifier
[Electronic Circuits]
Max
June 09, 2021, 06:58:33 PM
post Aisler PCB Manufacturer
[Printed Circuit Board]
Max
June 09, 2021, 06:58:12 PM
post [WTS] (US) Large Ferrite U and E Cores, assorted types
[Sell / Buy / Trade]
Steve Ward
June 09, 2021, 05:44:06 PM

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 
SimplePortal 2.3.6 © 2008-2014, SimplePortal